AEK-POW-LDOV01J STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
with up to 200 mA load current capability
- Protection and diagnostics features: – Enable pin – Reset – Watchdog – Advanced thermal warning with output overvoltage detection – In-short control – Fast output discharge
Description
The AEK-POW-LDOV01J is an evaluation board based on the L99VR01JTR. It can be used in several electronic applications such as microcontroller supplies, automotive display drivers, sensors, and infotainment processors. Thanks to its thermal performance up to 170°C, the device is suitable for electronic applications with high temperature environments and for applications that require stable power supplies. Product summary Automotive-grade LDO with configurable output voltage and diagnostic features based on L99VR01JTR AEK-POW- LDOV01J Automotive linear voltage regulator with configurable output voltage and 200 mA current capability L99VR01JTR AutoDevKit library plugin for SPC5- STUDIO STSW- AUT ODEVKIT Code generator, quick resource configurator and Eclipse development environment for SPC5 MCUs SPC5-Studio Application Power Distribution/ Digital Power Automotive-grade LDO with configurable output voltage and diagnostic features based on the L99VR01JTR AEK-POW-LDOV01J Data brief DB4723 - Rev 2 - September 2022 For further information contact your local STMicroelectronics sales of fice.
1 Block diagram
Figure 1. AEK-POW -LDOV01J block diagram
2 Schematic diagrams
Figure 2. AEK-POW -LDOV01J circuit schematic
3 Board versions
Table 1. AEK-POW -LDOV01J versions This code identifies the AEK-POW-LDOV01J evaluation board first version. It is printed on the board PCB.
Revision history
T able 2. Document revision history Date Revision Changes 26-Jul-2022 1 Initial release. 02-Sep-2022 2 Minor text changes. AEK-POW-LDOV01J DB4723 - Rev 2 page 5/6
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’ s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www .st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2022 STMicroelectronics – All rights reserved AEK-POW-LDOV01J DB4723 - Rev 2 page 6/6