AEE02F12-49 ASTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-96621 Special Features Electrical Specs

10 Watts

  • 10 W, Dual output
  • 2:1 Input range
  • 1.0" x 2.0" x 0.33 case
  • Industry standard package
  • Low Profile
  • Low Cost Operating base temperature range: -25°C to +100°C Storage temperature: -40°C to +125°C MTBF: 3 Million Hours (Belcore TR332) UL UL1950 Recognition CSA CSA22.2-950 Recognition TUV EN60950 Recognition Input Input range 9 to 18 VDC Efficiency 78% typical (3.3V) Output Voltage tolerance ±1.0% Overall regulation ±1% max Noise/ripple 1% Typ, 2% Max Transient response 300 usec typical (50% step load change to within 3%Vo) Temperature Regulation ±0.02 %Vo/°C Switching frequency 330kHz Isolation I/O isolation 1500 VDC Input to Output

1000 VDC Input to Case

1000 VDC Output to Case

Isolation Resistance 300 Mohms Total Power: 10 Watts Input Voltages: 12V No. of Outputs: Single and Dual Environmental Safety

Astec House, Waterfront Business Park Merry Hill, Dudle y West Midlands, DY5 1LX, UK Telephone : 44 (1384) 842-21 1 Facsimile : 44 (1384) 843-35 5 AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008 Telephone: 760-930-460 0 Facsimile: 760-930-069 8

Ordering Information

www.astecpower.com ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223 , Hing Fong Roa d Fwai Fong, New Territorie s Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-442 6 Input Output Efficiency Model Number Voltage Voltage 9-18 V 3.3V @ 2.55 A 78% AEE02F12-49 9-18 V 5.0V @ 2 A 81% AEE02A12-49 9-18 V 12V @ 0.84 A 83% AEE00B12-49 9-18 V 15V @ 0.68 A 84% AEE00C12-49 9-18 V ±5V @ ±1.0 A 81% AEE01AA12-4 9-18 V ±12V @ ±0.42 A 83% AEE00BB12-4 9-18 V ±15V @ ±0.33 A 84% AEE00CC12-4 NOTES: Enable Function Trim Feature Notes: 1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor is recommended to be placed from +V out to comm. 2. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 3. All specifications subject to change without notice. 4. Mechanical drawings are for reference only. Mechanical Dimensions and Pin Assignments 1. With the control pin floating (no connection), the unit is enabled and there is an output of 5V. 2. With the control pin Low (short to -Vin), the unit is enabled and there is an output of 5V. 3. With the control pin connected to an external logic signal (5V), the unit is disabled and there is no output. “9” at end of Model Number designates Trim option.