AEE01AA24 ASTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 Special Features Electrical Specs

10 Watts

  • 10 W, Dual output
  • 2:1 Input range
  • 1.0" x 2.0" x 0.33 case
  • Industry standard package
  • Low Profile
  • Low Cost Operating base temperature range: -25°C to +95°C Storage temperature: -40°C to +105°C MTBF: 2.7 Million Hours (Belcore TR332) UL UL1950 Recognition CSA CSA22.2-950 Recognition TUV EN60950 Recognition Input Input range 18 to 36 VDC 36 to 72 VDC Efficiency 79% typical (±5V) Output Voltage tolerance ±1.0% Overall regulation ±1% max Noise/ripple 1% (mV P-P) Transient response 200 usec typical (50% step load change to within 5%Vo) Temperature Regulation ±0.02 %Vo/°C Switching frequency 330kHz Isolation I/O isolation 500 VDC Isolation Resistance 300 Mohms Total Power: 10 Watts Input Voltages: 48V, 24V No. of Outputs: Dual Environmental Safety

Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Ordering Information

www.astecpower.com Rev02: January 04 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Input Output Efficiency Model Number Voltage Voltage 18-36 V ±5V @ ±1.0 A 79% AEE01AA24 18-36 V ±12V @ ±0.42 A 83% AEE00BB24 18-36 V ±15V @ ±0.33 A 83% AEE00CC24 36-72 V ±5V @ ±1.0 A 79% AEE01AA48 36-72 V ±12V @ ±0.42 A 83% AEE00BB48 36-72 V ±15V @ ±0.33 A 83% AEE00CC48 Notes: 1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor is recommended to be placed from +V out to comm. 2. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 3. All specifications subject to change without notice. 4. Mechanical drawings are for reference only. Mechanical Dimensions and Pin Assignments