AED17 ASTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Business-Critical Continuity AED/ALD17

150 Watts

  • Intermediate Bus Converter for Front End (DPA) Distributed Power Architecture application
  • High efficiency (96% Typical)
  • Industry standard package 16th Brick 0.90” x 1.30"
  • High capacitive load limit on start-up
  • Output Enable Pin
  • Undervoltage lockout
  • Over Temperature Protection
  • Meets Basic Insulation
  • EU directive 2002/95/EC compliant for RoHS Total Power: 150 Watts Input Voltage: 48V # of Outputs: Single Electrical Specifications Safety Input Input range 36V to 55V Efficiency 96%@ 9.6V (typical) Over Voltage Protection 60V typical Output Output current 17A max Line regulation -25% / +15% Vo, nom Load regulation 5% Vo (typical) Noise/ripple1 90mV (typical) Over current limit Auto-restart Over temperature protection 115°C average PCB temperature (autorecovery) Switching frequency 165kHz Control Enable TTL compatible (positive or negative enable logic) Isolation Voltage Input to Output 2000Vdc max UULL,, ccUULL 60950-1 TTUUVV EN60950-1 Rev. 04.20.06 AED/ALD17 1 of 2 Operating ambient temperature range -40°C to +85°C ambient Storage temperature -55°C to +125°C MTBF >1 million hours Environmental Specifications RoHS

Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co. Embedded Power for Business-Critical Continuity Emerson Network Power. The global leader in enabling business-critical continuity. EmersonNetworkPower. com AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services Pin Assignments Single Output 1. +Vin 2. Enable 3. -Vin 4. -Vout 5. Blank 6. Blank 7. Blank 8. +Vout Notes: 1. Measured at 20 MHz bandwidth with external 10 µF tant. capacitor in parallel with 1 µF ceramic capacitor placed across +Vout and - Vout; 33 µF e-cap or equivalent placed across +Vin and -Vin. 2. Efficiency measurements are typical values taken at 48V input, nominal output, full load and T A = 25°C. 3. All specifications are typical at nominal line, full load and TA = 25°C unless otherwise noted. 4. All specifications subject to change without notice. 5. Mechanical drawings are for reference only. Dimensions are in inches [millimeters]. Pin placement tolerance ± 0.005 [0.127]. Mechanical Tolerance ± 0.02 [0.5]. Pin diame- ter, ∅= 0.06” for Pin 4 (-Vout) and Pin 8 (+Vout), the rest of the pins are ∅= 0.04”. 6. Technical Reference Notes should be consulted for detailed information when available. 7. Warranty 1yr. Mechanical Drawing Astec Power

5810 Van Allen Way

Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Units 2111-2116, Level 21 Tower 1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426 For global contact, visit: www.astecpower.com technicalsupport@astec.com While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in U S A

Ordering Information

Voltage Output Voltage Output Current Efficiency2 Model Number 36 - 55V 9.6V 17A 96% Typ A(X)D17Q50(N)-(6)(L) Options: (X) : “L” = Open Frame / Low Profile “E” = Heatplate Construction (N) : "N" = designates Negative Logic Enable (default is Positive Enable with no suffix “N” required) (6) : “-6” = 3.7mm nominal pin length (default is 5mm nominal pin length with no suffix “-6” required) (L) : “L” = RoHS Compliant (RoHS 6) without “L” = RoHS Compliant with Lead (Pb) in solder exemption (RoHS 5) Rev. 04.20.06 AED/ALD17 2 of 2 * This is a Preliminary Data Sheet. Astec Power reserves the right to make changes to the information contained herein with- out notice and assumes no liability as a result of its use or application. 0.60 [15.2] 0.04Ø 0.60 [15.2] 0.062 Ø 0.189[4.8] min 0.204[5.2] max 1.0Ø PIN SIDE UP SIDE VIEW PIN SIDE DOWN 1.10 [27.9] 0.35 [8.9] 0.10 [2.5] 0.15 [3.8] 0.30 [7.6] [1.57Ø] (2x) 0.90 [22.9] 1.30 [33.0] PIN 1PIN 1 PIN 8 [13.6] Ø [2.5] 0.10 [27.9] 1.10 [3.8] 0.15 [15.2] 0.60 [7.6] 0.30 ](3X)Ø[1.0 Ø0.040 CL 0.062 [15.2] 0.60 [7.6] 0.30 ](2X)Ø[1.57 [10.6] 0.42 [33.0] 1.30 [1.2] 0.05 [35.3] 1.39 [22.9] 0.90 0.18 [4.8]Min. 0.20 [5.2]Max. 0.54 PIN 1 PIN 8 PIN SIDE DOWN SIDE VIEW PIN SIDE UP AED Series ALD Series