AEC-Q200

BCN_18 TTELEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

Sulphur resistant version available (Tested to ASTM-B809) AEC-Q200 (BCN164AB and BCN4D)

• Reliable monolithic construction
• Nickel barrier terminations
• Top side marking for easy identification
• Concave or convex termination styles
• Square or scalloped edges available

Applications

• Pull up / pull down resistors for digital IC’s
• Series termination on high speed data busses
• Current limit for LED displays
• Available as an 8 bit R/2R Ladder Network Benefits
• Saves board space over equivalent rated chip resistors
• Eliminates up to seven pick & place operations
• Single component reliability
• Leadless chip, reduced inductance
• Mounts close to active devices Thick Film Chip Arrays BCN Series Model (Width) # of Resistors Circuit Package Size Chip Array Edge Finish / Termination Scalloped Convex Square Convex Square Concave Model BCN 10 (1.0mm) 4 Resistors Isolated 0804 0402 • Model BCN 16 4ABI (1.6mm) 4 Resistors Isolated 1206 0603 • Model BCN 16 4A/AB (1.6mm) 4 Resistors Isolated 1206 0603 • • Model BCN 16 8RB/8SB (1.6mm) 8 Resistors Bussed 1206 0603 • Model BCN 21 (2.1mm) 8 Resistors Bussed 1608 0804 • Model BCN 4D (3.1mm) 4 Resistors Isolated 2112 1206 • Model BCN 4DBI (3.1mm) 4 Resistors Isolated 2112 1206 • Model BCN 31 8RB/8SB (3.1mm) 8 Resistors Bussed 2512 1206 • Model BCN 31 8RBI/8SBI (3.1mm) 8 Resistors Bussed 2512 1206 • Jumper Chip Array 4/8 Resistors Isolated/Bussed All All • • • Model Styles Resistors 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)

BI Technologies IRC Welwyn Thick Film Chip Arrays BCN Series Electrical Environmental Construction Standard Resistance Range, Ohms BCN4D, BCN10, BCN16 4: BCN 16 8R / 8S: BCN 31 8R / 8S: BCN 21: 10 to 1 Megohm 100 to 1 Megohm 22 to 1 Megohm 68 to 220K Standard Resistance Tolerance ±5% (J Tol.) Optional: ±1% (F Tol.), BCN 4D, BCN 16 4, BCN31 8RB / 8SB Only ±2% (G Tol.), BCN 16 4, BCN31 8RB / 8SB Only Operating Voltage, Maximum BCN 4D: BCN 16 4, BCN 31 8R / 8S: BCN 10, BCN 16 8R / 8S, BCN 21: 75Vdc or √pr 50Vdc or √pr 25Vdc or √pr Power Rating, watts at 70°C BCN 4D: BCN 10, BCN 164: BCN 16 8R / 8S: BCN 21, BCN 31 8R / 8S: 125mW per Resistor / 500mW per Package 63mW per Resistor / 250mW per Package 32mW per Resistor / 250mW per Package 63mW per Resistor / 500mW per Package Test Condition Parts with no TCR code Parts with Z TCR code Operating Temperature Range -55°C to +155°C Temperature Coefficient of Resistance ±200ppm/°C ±100ppm/°C Moisture Resistance 1,000 hours @ +40°C, 95% R.H. 3% +0.1Ω ΔR 1% +0.1Ω ΔR High Temperature Operation 1,000 hours @ 155°C 3% +0.1Ω ΔR 1% +0.1Ω ΔR Short Time Overload 2.5 x rated voltage, 5 seconds 2% +0.1Ω ΔR 0.25% +0.1Ω ΔR Temperature Cycling -55°C to +155°C, 5 cycles 1% +0.1Ω ΔR 1% +0.1Ω ΔR Resistance to Solder Heat 260°C for 10 seconds 1% +0.1Ω ΔR 0.25% +0.1Ω ΔR Load Life 1,000 hours @ 70°C 3% +0.1Ω ΔR 1% +0.1Ω ΔR Conductor Nickel Barrier Resistor: Ruthenium Oxide Alumina Substrate 100% Tin 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors Passivation: Glass or Resin

BI Technologies IRC Welwyn Model, BCN 4D, BCN 10 & BCN 16 4 10 100 1K 10K 100K 1 Meg 12 120 1.2K 12K 120K Jumper 15 150 1.5K 15K 150K 18 180 1.8K 18K 180K 22 220 2.2K 22K 220K 27 270 2.7K 27K 270K 33 330 3.3K 33K 330K 39 390 3.9K 39K 390K 47 470 4.7K 47K 470K 56 560 5.6K 56K 560K 68 680 6.8K 68K 680K 82 820 8.2K 82K 820K Model BCN 16 8R & BCN 16 8S 220 1K 10K 100K 330 4.7K 47K 1 Meg Model BCN 21 68 330 4.7K 10K 220 1K 47K 100K Model BCN 31 8R Model BCN 31 8S 220 2.2K 10K 100K 330 2.7K 22K 470K 1K 4.7K 47K 1 Meg Electrical Standard Resistance Values, Ohms R1 R2 R3 R 4 R1 = R2….Rn (n = 2, 4) 10 9 8 7 6 1 2 3 4 5 BCN 16 8R & BCN 31 8R 10 9 8 7 6 5 4 3 2 1 BCN 16 8S & BCN 31 8S BCN 21 Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BCN 06 4, BCN 4D, BCN 10 & BCN 16 4

BI Technologies IRC Welwyn L W H P B B1 C BCN 4D .012 ±.008 BCN 10 BCN 16 4A/ AB .009 ±.005 BCN 31 L W H P B C C1 BCN 4 DBI BCN 16 4ABI BCN 31 -.004 -.01 Outline Dimensions (Inch /mm) C L (BCN 4D, BCN 16 4A) W H B P C L (BCN 4D, BCN 10,BCN 16 4A) L (BCN 31) W H P B1 Exterior Termination (Convex) Square Edge: Models BCN 16 4AB, 31 B Interior Termination (Concave) Square Edge: Models BCN 4 DBI, 16 4ABI, 31 C C B P H LC1 Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors Scalloped Edge: Models 4ABCN 2D, 4D, 16 BCN 2D, 4D, 16

BI Technologies IRC Welwyn Outline Dimensions (Inch /mm) L W T A B1 B2 C P L W T A B C D A1 B1 C1 D1 E P Exterior Termination (Convex) Square Edge: Models BCN 16 8R, 8S L W P B2 A T C Interior Termination (Concave) Square Edge: Models BCN 21 L T W C D P A B 1D E 1A Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors

BI Technologies IRC Welwyn Solder pad layout (Inch / mm) Wave Solder Process Re-flow Solder Process P A B X X1 Y A B X X1 Y BCN 16 8RB / 8SB BCN 4D/4DBI BCN 16 4A, AB, ABI BCN 31 8R, 8S Wave Solder Process Re-flow Solder Process P A B C X Y A B C X Y BCN 16 4AB, 4ABI BCN 31 Only A B Y Y X C P BCN 16 8RB / 8SB Y Y B A P X X1 Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors

BI Technologies IRC Welwyn Solder pad layout (Inch / mm) BCN 10 P P1 A B X X1 Y L BCN 21 P A B C X Y W W1 W2 W3 L Y L P A X X1 B P X A B W L C Y BCN 10 BCN 21 Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors

BI Technologies IRC Welwyn A = Isolated (BCN 10 / 16 4A)

Ordering Information

Construction Option: No code = Standard product No. of Resistors: on BCN4DxxxJ7 BCN 4D = 4 Resistors Packaging Option: Circuit Configuration: (See Table A) D = Isolated Tolerance: ±5% Resistance Code Edge Option (B = Square Edge): Termination Code: I = Interior (Concave) Termination BCN 4D: Scalloped Edge Only - No Code Used (Only available in BCN 4 DBI) S = Sulphur resistant - only BCN 16 4 A B I 102 J 7 S Model Series Construction Option: No code = Standard product Width: S = Sulphur resistant - only 10 = 1.0mm 16 = 1.6mm Packaging Option: 21 = 2.1mm (See Table A) 31 = 3.1mm Tolerance: No. of Resistors: G = ±2% (BCN 16 4, 31 8RB / 8SB Only) BCN 10 / 06 4 / 16 4 = 4 Resistors J = ±5% (Standard) BCN 16 8R / 16 8S = 8 Resistors (Use JP for Jumper Chip Array - BCN 16 4 / 31) BCN 21 / 31 8R / 31 8S = 8 Resistors Resistance Code: Circuit Configuration: R = Bussed (Reversed) (BCN 16 8R / 31 8R) S = Bussed (Standard) (BCN 21 / 16 8S / 31 8S) Termination Code: I = Interior (Concave) Termination Edge Option (B = Square Edge): No code used for exterior termination ( Standard) Scalloped Edge - No Code Used (Standard) All interior termination requires ‘B’ for square edge Square Edge Only - Use Code ‘B’ (BCN 16 4ABI / 31 8RBI / 31 8SBI) F = ±1% (BCN 4D / 16 4 / 31 8RB / 31 8SB) See ‘Model Styles’ for Available Options 7” or 13” 7” or 13” on BCN 104/164/168RB TCR Code: No code = ±200ppm/°C (standard) Z = ±100ppm/°C (BCN164 only) Z Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors 3 digits for all E24 values in 2% or 5% tolerance 4 digits for uniquely E96 values in any tolerances and for any value in 1% tolerance

BI Technologies IRC Welwyn Packaging (Table A) 7” Reel Diameter 13” Reel Diameter Paper Embossed Paper Embossed BCN 4D 4K 16K BCN 10 10K 40K BCN 16 4 5K 20K BCN 16 8 5K 20K BCN 21 4K 16K BCN 31 4K 16K Note: Tape & Reel dimensions per EIA-481. Sulphur Resistant Arrays

• Special construction resists sulphide growth
• Withstands sulphur bearing fume environment
• Tested to ASTM-B809 (“Flowers-of-Sulphur”)
• Suitable for industrial, automotive and roadside uses
• RoHS compliant matt Tin finish terminations Performance Data Hydrogen Sulphide exposure:
• 1000 Hours, 3-5ppm H2S, 50°C, 92%RH
• 0.5% Max ΔR and no visual defects Thick Film Chip Arrays BCN Series 02.18 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors