MIL-DTL-26482 CONESYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
& Part Number Development Military and Aero-Electric Part Number Development Mil. Prefix MS34 70 L 12- 10 P Ww Aero Prefix AE7Z 70 L 12- 10 P W -340 Shell type 70 = Narrow flange receptacle 71= Cable connecting receptacle 72= Wide flange receptacle 74= Jam nut receptacle 75= RFI grounding plug 76 = Straight plug Class (Material and Finish) A= Aluminum shell, black anodized finish (not available in RFI plug) L= Aluminum shell, electroless nickel finish W= Aluminum shell, olive drab cadmium over electroless nickel base ‘$*= Stainless steel shell, passivated (Aero part number only) BN* = Aluminum shell,Black Nickel finish, (ROHS), (Aero part number only) Shell Size 8, 10, 12, 14, 16, 18, 20, 22 or 24 Insert Arrangement See pages 125 thru 126 Contact Style P=Pin ‘$= Socket A= Pin connector less pins (with intent to use non-std contact) B = Socket connector less sockets (with intent to use non-std contacts) = Polarization a N = Normal (not included in part number) 100) W, X, Y or Z= Alternate insert polarizations (see pages 123 for position availability) mn Modification (applies to Aero part numbers only) = 01 =Less contacts (is not marked on the part) 340= Connector kitted with M85049/31-XXX E-nut 341 = Connector kitted with M85049/52-1-XXX straight clamp 342 = Connector kitted with M85049/51-1-XXX right angle clamp * Not on QPL, can be supplied to Aero part number only. Consult factory Note 2: Proper part number marking has no “0” in front for availability. of single digit shell size ( 8) and no “0” afier the dash be- tween shell size and single digit layout. Example of each: Note 1: Each connector is furnished with contacts unless MS3470W8-33P and MS3470W 10-6P. In both “N” for normal ordered less contacts (L/C) as follows: One spare contact for was omitted. inserts requiring 2 to 26 of each contact and two spares for inserts with 27 or more of each size, and a minimum of one Note 3: Insert layouts 8-2, 8-3 and 8-4 can only be ordered sealing plug up to 15% of the number of contacts. In addition, to Aero-Electric part number. Non standard contacts are one plastic insetion/removal tool of each size is included. required and to avoid confusion are sold “with contacts” only. See page 80 for the correct contact part numbers. Www.conesys.com -Te- saleseaero-electric.com