AE590PNB COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
1102 Silver Lake Road
cps@coilcraft.com www.coilcraft-cps .com © Coilcraft, Inc. 2011 Specifications subject to change without notice. Please check our website for latest information.
1260 POWER INDUCTORS
Document AE599-1 Revised 07/22/11 Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel over phos bronze. Weight: 2.8 g – 3.3 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth DCR3 SRF 4 Isat (A)5 Irms (A) 6 Inductance2 (mOhms) (MHz) 10% 20% 30% 20°C 40°C Part number1 (µH) typ max min typ drop drop drop rise rise 1. When ordering, please specify testing code: AE590PNB824KSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified tempera- ture rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Outgassing Compliant Power Inductors AE590PNB ■ High current, low DCR shielded power inductors ■ Passes NASA low outgassing specifications ■ High temperature materials allow operation in ambient temperatures up to 165°C. ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion
cps@coilcraft.com www.coilcraft-cps.com © Coilcraft, Inc. 2011 Specifications subject to change without notice. Please check our website for latest information. Document AE599-2 Revised 07/22/11 AE590PNB Series Typical L vs Frequency Typical L vs Current Current Derating 0.1 100 1000 10000 0.1 1 10010 Inductance (µH) Current (A) 1 µH 100 µH 10 µH 1000 µH 0.1 100 1000 10000 0.01 0.1 101 Inductance (µH) Frequency (MHz) 1 µH 100 µH 10 µH 1000 µH Ambient temperature (°C) Pe rcent of rated Current 120 110 100 25°C Isat Irms -40-55 -20 02 04 06 08 0 100 160140120 Dimensions are in inches mm