DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information.
1246 POWER INDUCTORS
Document AE540-1 Revised 12/05/12 DCR3 SRF4 Isat (A)5 Irms (A) 6 Inductance2 (mOhms) (MHz) 10% 20% 30% 20°C 40°C Part number1 (µH) typ max min typ drop drop drop rise rise Outgassing Compliant Power Inductors AE566PNB Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel over phos bronze. Weight: 2.3 g – 2.5 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 200/7″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.7mm pocket depth ■ High current, low DCR shielded power inductors ■ Passes NASA low outgassing specifications ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion 1. When ordering, please specify testing code: AE566PNB105KSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD -A fixture in an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified tempera- ture rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Typical L vs Frequency Typical L vs Current 0.1 100 1000 10000 0.01 0.1 101 Inductance (µH) Frequency (MHz) 1000 µH 100 µH 10 µH 1 µH 0.1 1 10010 Current (A) 0.1 100 1000 10000 Inductance (µH) 1000 µH 100 µH 10 µH 1 µH Current Derating Dimensions are in inches mm -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated Current 120 110 100 25°C Isat Irms Document AE540-2 Revised 12/05/12