AE513PYA222MSZ

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

7020 POWER INDUCTORS

© Coilcraft, Inc. 2013

1102 Silver Lake Road

Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document AE871-1 Revised 01/10/13 1. When ordering, please specify testing code: AE513PYA222MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured using a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Inductance2 DCR (mOhms)3 SRF (MHz)4 Isat5 Irms (A)6 Part number1 ±20% (µH) typ max min typ (A) 20°C rise 40°C rise Outgassing Compliant Power Inductors AE513PYA Core material Composite Terminations Tin-lead (63/37) over copper. Weight 0.83 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 500 per 7″ reel Plastic tape: 16 mm wide, 0.30 mm thick, 12 mm pocket spacing, 2.2 mm pocket depth ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Passes NASA low outgassing specifications ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion ■ High current and very low DCR ■ Soft saturation makes them ideal for VRM/VRD applications. Irms Testing Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

AE513PYA Series (7020) © Coilcraft, Inc. 2013 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document AE871-2 Revised 01/10/13 L vs Current 0.5 1.0 1.5 3.0 2.0 2.5 2 3 4 5 6 7 8 91 01 11 21 31 4 15 Current (A) Inductance (µH) 0.4 0.8 2.0 1.2 1.6 4 6 8 10 12 14 16 18 20 Inductance (µH) 0.2 0.6 0.4 0.8 1.4 1.0 1.2 4 6 8 10 12 14 16 18 20 Current (A) Inductance (µH) 0.2 0.6 0.4 0.8 1.4 1.0 1.2 4 6 8 10 12 14 16 18 20 Current (A) Inductance (µH) 0.1 0.2 0.3 0.4 10 15 20 25 3530 4540 Current (A) Inductance (µH) 0.05 0.10 0.15 0.20 10 15 20 25 35 40 45 50 5530 60 Current (A) Inductance (µH) 0.15 µH 1.0 µH 1.2 µH 1.5 µH 2.2 µH 0.27 µH 0.1 0.2 0.3 0.6 0.4 0.5 6 9 12 15 18 21 24 27 30 Current (A) Inductance (µH) 0.2 0.4 1.0 0.6 0.8 6 9 12 15 18 21 24 27 30 Current (A) Inductance (µH) 0.1 0.2 0.5 0.3 0.4 10 15 20 25 30 35 Current (A) Inductance (µH) Current (A) 0.47 µH 0.68 µH 0.33 µH

AE513PYA Series (7020) © Coilcraft, Inc. 2013 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document AE871-3 Revised 01/10/13 Irms Derating L vs Frequency Dimensions are in inches mm -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated rmsI 120 110 100 25°C 0.295 ±0.020 7,5 ±0,5 0.295 ±0.020 7,5 ±0,5 0.079 2,0 max A (see table) B (see table) 0.063 ±0.004 1,60 ±0,10 0.123 3,12 ±0.010 ±0,25 0.07 1,78 0.186 4,72 Suggested Land Pattern A Dash B number (in / mm) (in / mm) ±0.008 in ±0,20 mm -151 0.249 / 6.32 0.257 / 6.52 -271 -681 0.241 / 6.12 0.245 / 6.22 -102 -152 0.239 / 6.08 0.242 / 6.16 -222 0.238 / 6.04 0.240 / 6.10 0.249 / 6.32 0.257 / 6.52 -331 0.245 / 6.22 0.251 / 6.37 -471 0.245 / 6.22 0.251 / 6.37 0.241 / 6.12 0.245 / 6.22 -122 0.241 / 6.12 0.245 / 6.22 * *Maximum height for -151 and -271 is 0.081 in / 2,05 mm.