AE512PJB COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
1102 Silver Lake Road
cps@coilcraft.com www.coilcraft-cps.com © Coilcraft, Inc. 2011 Specifications subject to change without notice. Please check our website for latest information. Document AE587-1 Revised 06/07/11
6235 POWER INDUCTORS
Outgassing Compliant Power Inductors AE512PJB Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel. Weight 460 – 480 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 350/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Passes NASA low outgassing specifications ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion DCR3 SRF Isat (A)5 Irms (A) 6 Inductance2 max (MHz)4 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) min typ drop drop drop rise rise 1. When ordering, please specify testing code: AE512PJB106MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
cps@coilcraft.com www.coilcraft-cps.com © Coilcraft, Inc. 2011 Specifications subject to change without notice. Please check our website for latest information. AE512PJB Series (6235) Document AE587-2 Revised 06/07/11 Typical L vs Current Typical L vs Frequency Typical Current Derating Dimensions are in inches mm 10000 1000 100 0.01 0.1 11 0 Frequency (MHz) Inductance (µH) 3300 µH 10 µH 33 µH 1000 µH 330 µH 100 µH 10000 1000 100 0.01 0.1 11 0 Current (A) Inductance (µH) 33 µH 330 µH 1000 µH 3300 µH 100 µH 10 µH Height dimension is after mounting.For maximum height dimension before mounting, add 0.006 in / 0,152 mm. 0.236 ±0.003 6,00 ±0,076 0.236 ±0.003 6,00 ±0,076 0.167 4,25 0.167 4,25 0.079 2,00 0.079 2,00 0.260 6,60 0.260 6,60 0.071 1,80 Dimensionsare of the case not includingthe termination.For maximum overall dimensionsincludingthe termination,add 0.005 in/0,13 mm. Recommended Land Pattern 0.165 4,20 0.165 4,20 0.039 1,00 typ typ0.039 1,00 0.138 ±0.004 3,5 ±0,10 Ambient temperature (°C) Pe rcent of rated c urrent Isat Irms -40-55 -20 02 04 06 08 0 100 160140120 120 110 100 25°C