AE486PYA801MSZ

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

© Coilcraft, Inc. 2012

1102 Silver Lake Road

Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. 1. When ordering, please specify testing code: AE486PYA472MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Inductance2 DCR (mOhms)3 SRF (MHz)4 Irms (A)6 Part number1 ±20% (µH) typ max min typ Isat (A)5 20°C rise 40°C rise

5030 POWER INDUCTORS

Terminations Tin-lead (63/37) over copper. Weight 0.44 – 0.51 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 250 per 7″reel Plastic tape: 16 mm wide, 0.3 mm thick, 8 mm pocket spacing, 5.21 mm pocket depth Outgassing Compliant Power Inductors AE486PYA ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Passes NASA low outgassing specifications ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion ■ High current and very low DCR ■ Soft saturation makes them ideal for VRM/VRD applications. Irms Testing Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Document AE794-1 Revised 07/20/12

© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. AE486PYA Series (5030) Document AE794-2 Revised 07/20/12 L vs Current 0.20 0.05 0.10 0.15 0.25 0.30 51 01 52 02 53 03 5 Current (A) Inductance (µH) 0.16 µH 0.2 0.1 0.4 0.5 0.3 0.6 5 10 15 20 25 30 Current (A) Inductance (µH) 0.33 µH 0.2 0.4 0.6 0.8 1.0 Current (A) Inductance (µH) 0.60 µH 0 5 10 15 20 25 0.2 0.4 0.6 0.8 1.0 1.2 Current (A) Inductance (µH) 0.80 µH 0 24 68 10 12 14 16 18 20 3210 0.4 0.8 1.2 1.6 2.0 4 56 79 1514131211108 Current (A) Inductance (µH) 1.2 µH 1.0 0.5 2.0 1.5 3.0 3.5 2.5 4.0 Current (A) Inductance (µH) 2.2 µH 102 34 57 89 10 11 126 Current (A) Inductance (µH) 3.3 µH 102 34 57 89 10 11 126 Current (A) Inductance (µH) 4.7 µH 102 34 57 89 106

© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. AE486PYA Series (5030) Document AE794-3 Revised 07/20/12 Irms Derating L vs Frequency 0.1 0.1 1 10010 Frequency (MHz) Inductance (µH) 3.3 µH 2.2 µH 4.7 µH 1.2 µH 0.80 µH 0.60 µH 0.33 µH 0.16 µH 0.122 3,1 max 0.216 ±0.008 5,48 ±0,2 0.208 ±0.008 5,28 ±0,2 0.091 2,31 ±0.010 ±0.25 0.046 1,18 0.130 3,31 Recommended Land Pattern Dimensions are in inches mm 0.039 ±0.002 1,0 ±0,05 A Dash B number (in / mm) (in / mm) ±0.008 in ±0,20 mm -161 0.175 / 4.44 0.183 / 4.64 -331 0.175 / 4.44 0.183 / 4.64 -601 0.175 / 4.44 0.183 / 4.64 -801 0.175 / 4.44 0.183 / 4.64 -122 0.168 / 4.28 0.173 / 4.40 -222 0.168 / 4.28 0.173 / 4.40 -332 0.167 / 4.24 0.171 / 4.34 -472 0.165 / 4.18 0.167 / 4.25 B (see table) A (see table) -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated rmsI 120 110 100 25°C Suggested Land Pattern