DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Outgassing Compliant Power Inductors AE425PJB
4018 POWER INDUCTORS
Terminations Tin-lead (63/37) over tin over nickel. Weight 54 – 64 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Passes NASA low outgassing specifications ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion DCR Isat (A)5 Irms (A)6 Inductance2 max3 SRF (MHz)4 10% 20% 30% 20°C 40°C Part number1 (µH) (Ohms) min typ drop drop drop rise rise 1. When ordering, please specify testing code: AE425PJB105MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified induc- tance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Com- ponents” before soldering. Document AE435-1 Revised 06/07/11
© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. AE425PJB Series (4018) Document AE435-2 Revised 06/07/11 Typical L vs Frequency Typical L vs Current Current Derating Dimensions are in inches mm 0.1 1 100.1 1 10 Frequency (MHz) 0.1 10000 1000 100 0.01 Inductance (µH) 1 µH 4.7 µH 22 µH 680 µH 2200 µH 0.1 10000 1000 100 0.01 0.1 11 0 Current (A) Inductance (µH) 1 µH 22 µH 680 µH 2200 µH 4.7 µH -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated Current 120 110 100 25°C Isat Irms Height dimension is after mounting.For maximum height dimension before mounting, add 0.006 in / 0,152 mm. 0.0709 ±0.004 1,80 ±0,10 0.1535 ±0.003 3,90 ±0,076 0.1535 ±0.003 3,90 ±0,076 0.060 1,52 0.173 4,40 0.123 3,124 Suggested Land Pattern 0.060 1,50 0.118 3,00 0.173 4,40 0.028 0,70 45° typ 0.090 2,30 0.123 3,124 0.090 2,30 Dimensionsare of the case not includingthe termination.For maximum overall dimensionsincludingthe termination,add 0.011 in/0,28 mm.