AE0402 YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Automotive Precision grade AE series Sizes 0402/0603/0805/1206 RoHS compliant & Halogen Free Product specification – January 20, 2025 V.1

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206 ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC Both part number s are identified by the series, size, tolerance, packing type , temperature coefficient, t aping reel and resistance value. SCOPE This specification describes AE0402 to AE1206 ultra precision chip resistors with lead -free terminations made by thi ck film process.

APPLICATIONS

 All general purpose applications  Car electronics  Industrial applications

FEATURES

 AEC-Q200 qualified  Halogen Free Epoxy  RoHS compliant  Reducing environmentally hazardous wastes  High component and equipment reliability  Moisture sensitivity level: MSL 1 ORDERING EXAMPLE The ordering code of a AE0603 chip resistor, TC 25 value 56Ω with ±0.5% tolerance, supplied in 7-inch tape reel is: AE0603DR-0756RL. NOTE 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) AE XXXX X X X XX XXXX L (1) SIZE 0402 / 0603 / 0805 / 1206 (2) TOLERANCE B = ± 0.1% D = ± 0.5% F = ± 1% (3) PACKAGING TYPE R = Paper/PE taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec E = ± 50 ppm/°C (5) TAPING REEL 07 = 7 inch dia. Reel 13 = 13 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note) Resistance rule of global part number Resistance code rule Example XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 MΩ) 1M = 1,000,000 Ω

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206 overcoat protective glass resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) ceramic substrate marking layer inner electrode YNSC088 protective coat marking layer resistive layer inner electrode termination (Ni /matte tin) ceramic substrate H YNSC064 W L MARKING AE0402 No marking AE0603 /AE0805 / AE1206 E-24 series: 3 digits, ±5% First two digits for significant figure and 3rd digit for number of zeros AE0603 E-24 series : 3 digits , ±1% & ±0.5% One short bar under marking letter E-96 series: 3 digits , ±1% & ±0.5% First two digits for E -96 marking rule and 3rd letter for number of zeros AE1206 Either resistance in E -24 or E -96: 4 digits First t hree digits for significant figure and 4th digit for number of zero s For further marking information, please see special data sheet “Chip resistors marking”. Fig. 3 Value = 24 Ω YNSC037 Fig. 4 Value = 12.4 k Ω Fig. 6 Chip resistor outlines OOUUTTLLIINNEESS For dimension see Table 1 CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive layer. The resistive layer is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 6. DIMENSION Fig. 1 ynsc007 Fig. 2 Value=10 KΩ YNSC001 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) -0.06 0.29 ±0.10 -0.10 0.45 ±0.15 -0.15 0.50 +0.10/ -0.30 Table 1 For outlines see fig. 6 Fig. 5 Value = 10 kΩ

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206

ELECTRICAL CHARACTERISTICS

(E24/E96) OPERATING TEMPERATURE RANGE POWER RATING MAXIMUM WORKING VOLTAGE DIELECTRIC WITHSTAN D VOLTAGE MAXIMUM OVERLOAD VOLTAGE TEMPERATURE COEFFICIENT OF RESISTANCE AE0402 100Ω to 1MΩ –55 °C to +155 °C 1/8 W 75 V 100 V 100 V - : Hot : ± 25ppm/°C Cold : -50~+25ppm/°C E : ± 50ppm/°C AE0603 100Ω to 1MΩ 1/5 W 100 V 150 V 150 V AE0805 100Ω to 1MΩ 1/4 W 150 V 300 V 300 V AE1206 100KΩ to 1MΩ 1/3 W 200 V 500 V 400 V NOTE The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8” FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting ” PACKING STYLE REEL DIMENSION AE0402 AE0603 AE0805 AE1206 Paper/PE taping reel (R) 7" (178 mm) 10,000 5,000 5,000 5,000 13" (330 mm) 50,000 20,000 20,000 20,000 NOTE 1. For Paper/PE tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing” PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity FUNCTIONAL DESCRIPTION PPOOWWEERR RRAATTIINNGG Each type rated power at 70°C: AE0402=1/8W AE0603=1/5W AE0805=1/4W AE1206=1/3W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=√(P X R) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) P=Rated power (W) R=Resistance value ( Ω) P MLB206_1 70 10055 50 Tamb( C)o (%P )rated 100 155 Fig. 7 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb)

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206 Table 4 Test condition, procedure and requirements TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS High Temperature Exposure AEC-Q200 Test 3 MIL-STD-202 Method 108 1,000 hours at TA = 155 °C, unpowered ±( 0.5%+0.05Ω) Moisture Resistance AEC-Q200 Test 6 MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts ± (0.5%+0.05Ω) Biased Humidity AEC-Q200 Test 7 MIL-STD-202 Method 103 1,000 hours; 85 °C / 85% RH 10% of operating power Measurement at 24± 4 hours after test conclusion. ± (1.0%+0.05Ω) Operational Life AEC-Q200 Test 8 MIL-STD-202 Method 108 1,000 hours at 125 °C, derated voltage applied for 1.5 hours on, 0.5 hour off, still-air required ± (1.0%+0.05Ω) Resistance to Soldering Heat AEC-Q200 Test 15 MIL-STD-202 Method 210 Condition B, no pre-heat of samples Lead-free solder, 260± 5 °C, 10±1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ± (0.2%+0.05Ω) No visible damage Thermal Shock AEC-Q200 Test 16 MIL-STD-202 Method 107 -55/+125 °C Number of cycles is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ± (0.5%+0.05Ω) ESD AEC-Q200 Test 17 AEC-Q200-002 Human Body Model, 1 pos. + 1 neg. discharges 0402/0603: 1KV 0805 and above: 2KV ± (3.0%+0.05Ω)

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting AEC-Q200 Test 18 J-STD-002 Electrical Test not required Magnification 50X SMD conditions: (a) Method B, aging 4 hours at 155 °C dry heat, dipping at 235± 3 °C for 5± 0.5 seconds. (b) Method B, steam aging 8 hours, dipping at 215± 3 °C for 5± 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260± 3 °C for 30± 0.5 seconds. Well tinned (≥95% covered) No visible damage Board Flex AEC-Q200 Test 21 AEC-Q200-005 Chips mounted on a 90mm glass epoxy resin PCB (FR4) Bending for 0402: 5 mm 0603/0805: 3 mm 1206 and above: 2 mm Holding time: minimum 60 seconds ± (1.0%+0.05Ω) Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/–55 °C and +25/+125 °C Refer to table 2 Formula: T.C.R= )t-(tR R-R 121 12 × 106 (ppm/°C) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Short Time Overload IEC60115-1 4.13 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature ±( 0.5%+0.05Ω) FOS ASTM-B-809-95 Sulfur (saturated vapor) 500 hours, 60± 2°C, unpowered ± (1.0%+0.05Ω)

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 1 Jan. 20, 2025 - Add size 0402, 0603, 0805 Version 0 Jul. 18, 2023 - New datasheet for Automotive thick film ultra precision chip resistors sizes

Chip Resistor Surface Mount www.yageo.com Jan. 20, 2025 V1 Product specification SERIES AE 0402 to 1206 LEGAL DISCLAIMER YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice. YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability. YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy -related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data -processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial, automotive, and/or COTS grade products for high reliability applications or manned space flight. Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.