ADT5116TA ADTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Low Jitter Output
- High Speed Data Transmission to 16Mbps
- Operating Voltage : 2.7V~5.5V
- Direct connectable to TTL or High Speed CMOS Logic
- LED Driving Current : ADT5116T(typ. 6mA), ADT5116TA(typ. 3mA) Application Fiber Optic Module for Digital Audio Equipment Absolute Maximum Ratings (Ta=25℃) Recommended Operating Conditions * Stress above those listed under Absolute Maximum Ratings may cause permanent damage of device. This is stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for longer periods may affect device reliability. During overload conditions (VIN>Vcc or VIN<GND), those voltage on Vcc pins with respect to ground must not exceed the values defined by the absolute maximum ratings. Parameter Symbol Ratings Unit Supply Voltage Vcc -0.5 ~ 7.0 volts Input Voltage Vin -0.5 ~ Vcc+0.5 volts Operating Temperature Topr -20 ~ 70 ℃ Storage Temperature Tstg -30 ~ 80 ℃ Parameter Symbol Ratings Unit Operating Supply voltage Vcc 2.7 ~ 5.5 volts Transmitting Data Rate Tdr Max. 16.0 Mbps
Mar.20. 2003 / Rev. 0.0 www.ad-tech.co.kr ADT5116TA * This specifications are subject to be changed without notice http://www.ad-tech.co.kr Input/Output Signal Description MP1 (inverted) 50% 50% Electrical Characteristics (Ta=25℃, Vcc=5.0V) Application Circuit ADT5116T/ADT5116TA Die2 VCC 10uF Digital Audio Input GND IN OUT For the chip test, Rload is connected instead of LED.(Rload=220Ω) LED VCC Parameter Symbol Condition Min. Vin=2.0V 7.5 Operating Current(ADT5116TA) Icc Vin=2.0V 5.0 5.5 6. 0 mA LED Driving Current(ADT5116T) I LED Vin=2.0V 5.5 6.0 6. 5 mA LED Driving Current(ADT5116TA) I LED Vin=2.0V 2.5 3.0 3. 5 mA Propagation Delay Time(Low→High) Tplh fin = 8MHz, NRZ - 15 - nsec Output High Level Voh Vin=0.8V 4.8 - - volts Output Low Level Vol Vin=2.0V, Rload=220 Ω 3.4 3.6 4. 0 volts Input High Level (ADT5116T) Vih - 1.3 - - volts 1.1 fin = 8MHz, NRZ Icc Vih Vil Tphl Typ. Max. Unit Operating Current(ADT5116T) 8.0 8. 5 mA Input High Level (ADT5116TA) - - volts Input Low Level - 0. 8 volts Propagation Delay Time(High→Low) 15 - nsec Tplh Tphl