ADS6149IRGZR

ADS6149 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 70

Technical content

FEATURES

DESCRIPTION

APPLICATIONS

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 14/12-Bit, MSPS ADCs With DDR LVDS and Parallel CMOS Outputs Maximum Sample Rate: 250 MSPS 14-Bit Resolution ADS614X ADS614X (ADS612X) is a family of 14-bit (12-bit) A/D converters with sampling rates up to 250 MSPS. It 12-Bit Resolution ADS612X combines high dynamic performance and low power 687 mW Total Power Dissipation at 250 MSPS consumption in a compact QFN package. This Double Data Rate (DDR) LVDS and Parallel makes it well-suited for multicarrier, wide band-width CMOS Output Options communications applications. Programmable Fine Gain up to 6dB for ADS614X/2X has fine gain options that can be used SNR/SFDR Trade-Off to improve SFDR performance at lower full-scale input ranges. It includes a dc offset correction loop DC Offset Correction that can be used to cancel the ADC offset. Both DDR Supports Input Clock Amplitude Down to 400 LVDS (Double Data Rate) and parallel CMOS digital mV PP Differential output interfaces are available. At lower sampling Internal and External Reference Support rates, the ADC automatically operates at scaled down power with no loss in performance. 48-QFN Package (7mm 7mm) Pin Compatible with ADS5547 Family It includes internal references while the traditional reference pins and associated decoupling capacitors have been eliminated. Nevertheless, the device can also be driven with an external reference. The device Multicarrier, Wide Band-Width is specified over the industrial temperature range Communications C to C). Wireless Multi-carrier Communications 250 MSPS 210 MSPS Infrastructure ADS614X Software Defined Radio ADS6149 ADS6148 14-Bit Family Power Amplifier Linearization ADS612X ADS6129 ADS6128 802.16d/e 12-Bit Family Test and Measurement Instrumentation High Definition Video Medical Imaging Radar Systems Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. PRODUCTION DATA information is current as of publication date. Copyright 2008, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

D0_D1_P D0_D1_M D2_D3_P D4_D5_P D6_D7_P D8_D9_P D10_D11_P D12_D13_P D2_D3_M D4_D5_M D6_D7_M D8_D9_M D10_D11_M D12_D13_M OVR_SDOUT ADS6149/48 RESET SCLK SEN SDATA DFS MODE DDR□LVDS□Interface AVDD AGND DRVDD DRGND ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

D0_D1_P D0_D1_M D2_D3_P D4_D5_P D6_D7_P D8_D9_P D10_D11_P D2_D3_M D4_D5_M D6_D7_M D8_D9_M D10_D11_M OVR_SDOUT ADS6129/28 RESET SCLK SEN SDATA DFS MODE AVDD AGND DRVDD DRGND DDR□LVDS□Interface ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

(1) ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com PACKAGE/ORDERING INFORMATION (1) (2) SPECIFIED PACKAGE LEAD/BALL PACKAGE ORDERING TRANSPORT PRODUCT PACKAGE-LEAD TEMPERATURE DESIGNATOR FINISH MARKING NUMBER MEDIA, QUANTITY RANGE ADS614x ADS6149IRGZR ADS6149 AZ6149 ADS6149IRGZT QFN-48 RGZ C to C Cu NiPdAu Tape and reel ADS6148IRGZR ADS6148 AZ6148 ADS6148IRGZT ADS612x ADS6129IRGZR ADS6129 AZ6129 ADS6129IRGZT QFN-48 RGZ C to C Cu NiPdAu Tape and reel ADS6128IRGZR ADS6128 AZ6128 ADS6128IRGZT (1) For thermal pad size on the package, see the mechanical drawings at the end of this data sheet. θ JA 25.41 C/W (0LFM air flow), θ JC 16.5 C/W when used with 2oz. copper trace and pad soldered directly to a JEDEC standard four layer in x in (7.62 cm x 7.62 cm) PCB. (2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. VALUE UNIT Supply voltage range, AVDD 0.3 V to 3.9 V Supply voltage range, DRVDD 0.3 V to 2.2 V Voltage between AGND and DRGND 0.3 to 0.3 V Voltage between AVDD to DRVDD (when AVDD leads DRVDD) to 3.3 V Voltage between DRVDD to AVDD (when DRVDD leads AVDD) 1.5 to 1.8 V V I Voltage applied to external pin, VCM (in external reference mode) 0.3 to 2.0 V Voltage applied to analog input pins INP, INM 0.3V to minimum V 3.6, AVDD 0.3V Voltage applied to input pins CLKP, CLKM (2) RESET, SCLK, SDATA, SEN, DFS and 0.3V to AVDD 0.3V V MODE T A Operating free-air temperature range to C T J Operating junction temperature range 125 C T stg Storage temperature range to 150 C (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. (2) When AVDD is turned off, it is recommended to switch off the input clock (or ensure the voltage on CLKP, CLKM is |0.3V|. This prevents the ESD protection diodes at the clock input pins from turning on. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 over operating free-air temperature range (unless otherwise noted) MIN TYP MAX UNIT SUPPLIES AVDD Analog supply voltage 3.3 3.6 V DRVDD Digital supply voltage 1.7 1.8 1.9 V ANALOG INPUTS Differential input voltage range V pp Input common-mode voltage 1.5 0.1 V Voltage applied on CM in external reference mode 1.5 0.05 V Maximum analog input frequency with V PP input amplitude (1) 500 MHz Maximum analog input frequency with V PP input amplitude (1) 800 MHz CLOCK INPUT ADS6149 ADS6129 250 Input clock sample rate MSPS ADS6148 ADS6128 210 Sine wave, ac-coupled 0.3 1.5 LVPECL, ac-coupled 1.6 V pp Input Clock amplitude differential CLKP V CLKM LVDS, ac-coupled 0.7 LVCMOS, single-ended, ac-coupled 3.3 V Input clock duty cycle 40% 50% 60% DIGITAL OUTPUTS C L Maximum external load capacitance from each output pin to DRGND pF R L Differential load resistance between the LVDS output pairs (LVDS mode) 100 Ω T A Operating free-air temperature C (1) See the Theory of Operation in the application section. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com Typical values are at AVDD 3.3 DRVDD 1.8 50% clock duty cycle, 1dBFS differential analog input, internal reference mode unless otherwise noted. Min and max values are across the full temperature range T MIN C to T MAX AVDD 3.3 DRVDD 1.8 V ADS6149/ADS6129 ADS6148/ADS6128 250 MSPS 210 MSPS PARAMETER UNIT MIN TYP MAX MIN TYP MAX ANALOG INPUT Differential input voltage range V PP Differential input resistance (at dc), See Figure M Ω Differential input capacitance, See Figure 3.5 3.5 pF Analog Input Bandwidth 700 700 MHz Analog Input common mode current (per input pin) µ A/MSPS VCM Common mode output voltage 1.5 1.5 V VCM output current capability mA DC ACCURACY Offset error mV Temperature coefficient of offset error 0.005 0.005 mV/ C Variation of offset error with supply 0.3 0.3 mV/V E GREF Gain error due to internal reference inaccuracy alone 1.25 0.2 1.25 1.25 0.2 1.25 %FS E GCHAN Gain error of channel alone 0.2 0.2 %FS Temperature coefficient of E GCHAN .001 .001 Δ C POWER SUPPLY I AVDD Analog supply current 170 155 mA Output buffer supply current, LVDS interface with 100 Ω external mA termination I DRVDD Output buffer supply current, CMOS interface Fin MHz (1) mA 10-pF external load capacitance Analog power 561 630 510 570 mW Digital power LVDS interface 126 160 118 153 mW Digital power CMOS interface, Fin MHz (2) 10-pF external 101 mW load capacitance Global power down mW Standby 120 120 mW (1) In CMOS mode, the DRVDD current scales with the sampling frequency, the load capacitance on output pins, input frequency and the supply voltage (see Figure and CMOS interface power dissipation in application section). (2) The maximum DRVDD current with CMOS interface depends on the actual load capacitance on the digital output lines. Note that the maximum recommended load capacitance on each digital output line is pF. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Typical values are at AVDD 3.3 DRVDD 1.8 50% clock duty cycle, 1dBFS differential analog input, internal reference mode unless otherwise noted. Min and max values are across the full temperature range T MIN C to T MAX AVDD 3.3 DRVDD 1.8 V ADS6149 ADS6148 210 MSPS 250 MSPS PARAMETER UNIT MIN TYP MAX MIN TYP MAX Fin MHz 73.4 73.4 Fin MHz 72.7 72.7 SNR Fin 100 MHz 72.3 72.3 dBFS Signal to noise ratio, LVDS Fin 170 MHz 71.3 69.7 71.2 Fin 300 MHz Fin MHz 73.2 73.3 Fin MHz 72.4 72.4 SINAD Fin 100 MHz 71.9 71.8 dBFS Signal to noise and distortion ratio, LVDS Fin 170 MHz 70.6 68.7 70.9 Fin 300 MHz 68.2 ENOB Fin 170 MHz 11.4 11.1 11.5 LSB Effective number of bits DNL 0.95 0.4 0.95 0.4 LSB Differential non-linearity INL LSB Integrated non-linearity Typical values are at AVDD 3.3 DRVDD 1.8 50% clock duty cycle, 1dBFS differential analog input, internal reference mode unless otherwise noted. Min and max values are across the full temperature range T MIN C to T MAX AVDD 3.3 DRVDD 1.8 V ADS6129 ADS6128 210 MSPS 250 MSPS PARAMETER UNIT MIN TYP MAX MIN TYP MAX Fin MHz 70.7 70.9 Fin MHz 70.5 70.5 SNR, Fin 100 MHz 70.1 70.1 dBFS Signal to noise ratio, LVDS Fin 170 MHz 67.5 69.5 67.7 69.5 Fin 300 MHz 67.8 67.9 Fin MHz 70.6 70.8 Fin MHz 70.4 70.4 SINAD Fin 100 MHz 69.8 69.8 dBFS Signal to noise and distortion ratio, LVDS Fin 170 MHz 66.5 69.2 66.7 69.3 Fin 300 MHz 67.2 67.3 ENOB Fin 170 MHz 10.8 11.2 10.8 11.2 LSB Effective number of bits DNL 0.5 0.2 0.5 0.2 1.0 LSB Differential non-linearity INL 2.5 2.5 2.5 2.5 LSB Integrated non-linearity Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com Typical values are at AVDD 3.3 DRVDD 1.8 50% clock duty cycle, 1dBFS differential analog input, internal reference mode unless otherwise noted. Min and max values are across the full temperature range T MIN C to T MAX AVDD 3.3 DRVDD 1.8 V ADS6149/ADS6129 ADS6148/ADS6128 210 MSPS 250 MSPS PARAMETER UNIT MIN TYP MAX MIN TYP MAX Fin MHz Fin MHz SFDR Fin 100 MHz dBc Spurious Free Dynamic Range Fin 170 MHz Fin 300 MHz Fin MHz 88.5 Fin MHz THD Fin MHz dBc Total Harmonic Distortion Fin 170 MHz Fin 300 MHz Fin MHz Fin MHz HD2 Fin 100 MHz dBc Second Harmonic Distortion Fin 170 MHz Fin 300 MHz Fin MHz Fin MHz HD3 Fin 100 MHz dBc Third Harmonic Distortion Fin 170 MHz Fin 300 MHz Fin MHz Fin MHz Worst Spur Fin 100 MHz dBc Other than second, third harmonics Fin 170 MHz Fin 300 MHz MHz, MHz, Each tone at dBFS IMD dBFS 2-Tone inter-modulation distortion 185 MHz, 190 MHz, Each tone at dBFS Recovery to within (of final value) for clock Input overload recovery 6-dB overload with sine wave input cycles PSRR For 100 mV PP signal on AVDD supply dB AC power supply rejection ratio Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

Dn_Dn+1_PDn_Dn+1_P Dn_Dn+1_MDn_Dn+1_M GNDGND VOCMVOCM Logic□0 V = –350□mVODL (1) Logic□1 V =□350□mVODH (1) T0399-01 ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 The DC specifications refer to the condition where the digital outputs are not switching, but are permanently at a valid logic level or AVDD 3.3 DRVDD 1.8 V ADS6149/ADS6148/ ADS6129/ADS6128 PARAMETER TEST CONDITIONS UNIT MIN TYP MAX DIGITAL INPUTS RESET, SCLK, SDATA, SEN (1) High-level input voltage 1.3 V All digital inputs support 1.8V and 3.3V CMOS logic levels Low-level input voltage 0.4 V SDATA, SCLK (2) VHIGH 3.3V High-level input current µ A SEN (3) VHIGH 3.3V SDATA, SCLK VLOW Low-level input current µ A SEN VLOW Input capacitance pF DIGITAL OUTPUTS CMOS INTERFACE (Pins to D13 and OVR_SDOUT) High-level output voltage DRVDD V Low-level output voltage V Output capacitance (internal to device) pF DIGITAL OUTPUTS LVDS INTERFACE (Pins D0_D1_P/M to D12_D13_P/M) (4) V ODH High-level output voltage (5) 275 350 425 mV V ODL Low-level output voltage (5) 425 350 275 mV V OCM Output common-mode voltage 1.2 1.3 V Capacitance inside the device, from either output to Output capacitance pF ground (1) SCLK, SDATA, SEN function as digital input pins in serial configuration mode. (2) SDATA, SCLK have internal 200 k Ω pull-down resistor (3) SEN has internal 100 k Ω pull-up resistor to AVDD. Since the pull-up is weak, SEN can also be driven by 1.8V or 3.3V CMOS buffers. (4) OVR_SDOUT has CMOS output logic levels, determined by DRVDD voltage. (5) With external 100 Ω termination Figure LVDS Voltage Levels Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

(1) ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Typical values are at AVDD 3.3V, DRVDD 1.8V, sampling frequency 250 MSPS, sine wave input clock, C LOAD 5pF (2) R LOAD 100 Ω (3) LOW SPEED mode disabled, unless otherwise noted. Min and max values are across the full temperature range T MIN C to T MAX AVDD 3.3V, DRVDD 1.7V to 1.9V. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT The delay in time between the rising edge of the input sampling clock and t a Aperture delay 0.7 1.2 1.7 ns the actual time at which the sampling occurs t j Aperture jitter 170 fs rms Time to valid data after coming out of STANDBY mode 0.3 µ s Time to valid data after coming out of PDN GLOBAL mode 100 Wake-up time clock Time to valid data after stopping and restarting the input clock cycles clock ADC Latency (4) Default, after reset cycles DDR LVDS MODE (5) t su Data setup time Data valid (6) to zero-crossing of CLKOUTP 0.8 1.2 ns t h Data hold time Zero-crossing of CLKOUT to data becoming invalid (6) 0.25 0.6 ns t PDI Clock propagation delay Input clock rising edge cross-over to output clock rising edge cross-over 0.2 t s t delay ns 100 MSPS Sampling frequency 250 MSPS t delay 5.0 6.2 7.5 ns Duty cycle of differential clock, (CLKOUTP CLKOUTM) LVDS bit clock duty cycle 52% 100 MSPS Sampling frequency 250 MSPS Rise time measured from 100 mV to 100 mV t RISE Data rise time, Fall time measured from 100 mV to 100 mV 0.08 0.14 0.2 ns t FALL Data fall time MSPS Sampling frequency 250 MSPS Rise time measured from 100 mV to 100 mV t CLKRISE Output clock rise time, Fall time measured from 100 mV to 100 mV 0.08 0.14 0.2 ns t CLKFALL Output clock fall time MSPS Sampling frequency 250 MSPS t OE Output enable (OE) to data delay Time to valid data after OE becomes active ns PARALLEL CMOS MODE (7) t START Input clock to data delay Input clock rising edge cross-over to start of data valid (8) 3.2 ns t DV Data valid time Time interval of valid data (8) 0.7 1.5 ns t PDI Clock propagation delay Input clock rising edge cross-over to output clock rising edge cross-over 0.78 t s t delay 100 MSPS Sampling frequency 150 MSPS t delay 6.5 ns Duty cycle of differential clock, (CLKOUT) Output clock duty cycle 50% 100 MSPS Sampling frequency 150 MSPS t RISE Data rise time, Rise time measured from 20% to 80% of DRVDD, Fall time measured from 80% to 20% of DRVDD, 0.7 1.2 ns t FALL Data fall time MSPS Sampling frequency 250 MSPS Rise time measured from 20% to 80% of DRVDD, t CLKRISE Output clock rise time, Fall time measured from 80% to 20% of DRVDD, 0.5 1.5 ns t CLKFALL Output clock fall time MSPS Sampling frequency 150 MSPS t OE Output enable (OE) to data delay Time to valid data after OE becomes active ns (1) Timing parameters are specified by design and characterization and not tested in production. (2) C LOAD is the effective external single-ended load capacitance between each output pin and ground (3) R LOAD is the differential load resistance between the LVDS output pair. (4) At higher frequencies, t PDI is greater than one clock period and overall latency ADC latency (5) Measurements are done with a transmission line of 100 Ω characteristic impedance between the device and the load. Setup and hold time specifications take into account the effect of jitter on the output data and clock. (6) Data valid refers to LOGIC HIGH of +100mV and LOGIC LOW of 100mV. (7) For Fs 150 MSPS, it is recommended to use external clock for data capture and NOT the device output clock signal (CLKOUT). (8) Data valid refers to LOGIC HIGH of 1.26V and LOGIC LOW of 0.54V. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 LVDS Timings at Lower Sampling Frequencies SETUP TIME, ns HOLD TIME, ns SAMPLING FREQUENCY, MSPS MIN TYP MAX MIN TYP MAX 210 1.0 1.4 0.4 0.8 190 1.1 1.5 0.5 0.9 170 1.3 1.7 0.7 1.1 150 1.6 1.9 0.9 1.2 125 1.9 2.2 1.1 1.4 100 2.5 2.0 Enable LOW SPEED mode t PDI ns (1) Fs 100, MIN TYP MAX Enable LOW SPEED mode 8.2 (1) Ts 1/Sampling frequency CMOS Timings at Lower Sampling Frequencies Timings specified with respect to input clock SAMPLING FREQUENCY, MSPS t START ns DATA VALID TIME, ns MIN TYP MAX MIN TYP MAX 210 1.7 1.6 2.4 190 0.4 2.2 3.0 170 5.1 2.4 3.6 150 4.8 3.0 4.3 Timings specified with respect to CLKOUT SAMPLING FREQUENCY, MSPS SETUP TIME, ns HOLD TIME, ns MIN TYP MAX MIN TYP MAX 150 2.0 3.2 1.5 2.2 125 2.9 2.2 2.7 100 5.0 3.8 Enable LOW SPEED mode t PDI ns (1) Fs 100 MIN TYP MAX Enable LOW SPEED mode (1) Ts 1/Sampling frequency Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

18□Clock□Cycles* T0105-09 E E E E E E E E E EO O O O O O O O O O Input Clock CLKOUTM CLKOUTP Output□Data DXP,□DXM DDR LVDS N–18 N–17 N–16 N–15 N–14 N–1 N N+1 N+2 N–18 N–17 N–16 N–15 N N+2 18□Clock□Cycles* CLKOUT Output□Data Parallel CMOS Input Signal Sample N N+1 N+2 N+3 N+4 th tPDI ta tsu th tPDI CLKP CLKM N+18 N+19 N+20 tsu E – Even Bits D0,D2,D4,... O – Odd Bits D1,D3,D5, ... N+1 Then,□overall□latency□= ADC□latency□+□1. ADC□latency□is□14□clock□cycles□in□low-latency□mode. ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Figure Latency Diagram Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

Data□Pair CLKP CLKOUTP Dn_Dn+1_P, Dn_Dn+1_M CLKM tPDI tsu th th tsu CLKOUTM (1) Dn – Bits□D0,□D2,□D4,... (2) Dn+1 – Bits□D1,□D3,□D5,□... Dn (1) Dn+1 (2) T0107-05 Output Data Dn tSTART Dn* Input Clock CLKM CLKP Input Clock Output Clock Output Data CLKM Dn CLKP tsu th CLKOUT Dn* tPDI tDV ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure LVDS Mode Timing Figure CMOS Mode Timing Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com ADS614X/2X can be configured independently using either parallel interface control or serial interface programming. To put the device in parallel configuration mode, keep RESET tied to HIGH (DRVDD). Now, pins DFS, MODE, SEN and SDATA can be used to directly control certain modes of the ADC. The device can be easily configured by connecting the parallel pins to the correct voltage levels (as described in Table to Table There is no need to apply reset. In this mode, SEN and SDATA function as parallel interface control pins. Frequently used functions can be controlled in this mode standby, selection between LVDS/CMOS output format, internal/external reference, two s complement/straight binary output format and position of the output clock edge. Table briefly describes the modes controlled by the parallel pins. Table Parallel Pin Functions TYPE OF PIN CONTROLS MODES CONTROL DFS Analog Data format and LVDS/CMOS output interface. MODE (1) Analog Internal or external reference, low speed mode enable SEN Analog CLKOUT edge programmability. Global power-down (ADC, internal references and output buffers are SDATA Digital powered down) (1) In the next generation pin-compatible ADC family, MODE will be converted to a digital control pin for certain reserved functions. So, the selection of internal or external reference and low speed functions will not be supported using MODE. In the system board using ADS61x9/x8, the MODE pin can be routed to a digital controller. This will avoid board modification while migrating to the next generation ADC. To exercise this mode, first the serial registers have to be reset to their default values and RESET pin has to be kept LOW. SEN, SDATA and SCLK function as serial interface pins in this mode and can be used to access the internal registers of the ADC. The registers can be reset either by applying a pulse on RESET pin or by setting HIGH the RESET bit (D7 in register 0x00). The serial interface section describes the register programming and register reset in more detail. Since the parallel pins DFS and MODE are not to be used in this mode, they have to be tied to ground. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 For increased flexibility, an additional configuration mode is supported wherein a combination of serial interface registers and parallel pin controls (DFS, MODE) can be used to configure the device. To exercise this mode, the serial registers have to be reset to their default values and RESET pin has to be kept LOW. SEN, SDATA and SCLK function as serial interface pins in this mode and can be used to access the internal registers of ADC. The registers can be reset either by applying a pulse on RESET pin or by setting HIGH the RESET bit (D7 in register 0x00). The serial interface section describes the register programming and register reset in more detail. The parallel interface control pins DFS and MODE can be used and their function is determined by the appropriate voltage levels as described in Table The voltage levels can be easily derived, by using a resistor string as illustrated with an example as shown in Figure Since some functions can be controlled using both the parallel pins and serial registers, the priority between the two is determined by a Priority Table as shown in Table Table Priority Between Parallel Pins and Serial Registers FUNCTION PRIORITY MODE pin controls this selection ONLY if the register bits REF 00, otherwise REF controls the Internal/External reference selection DFS pin controls this selection ONLY if the register bits DATA FORMAT 00, otherwise DATA Data format selection FORMAT controls the selection DFS pin controls this selection ONLY if the register bits LVDS CMOS 00, otherwise LVDS LVDS or CMOS interface selection CMOS controls the selection Table SDATA DIGITAL CONTROL PIN SDATA (default) AVDD Global power-down. ADC, internal references and the output buffers are powered down. Table SEN ANALOG CONTROL PIN (1) SEN LVDS: Data and output clock transitions are aligned CMOS: Setup time increases by (6xTs/26), Hold time reduces by (6xTs/26) LVDS: Setup time decreases by (4xTs/26), Hold time increases by (4xTs/26) (3/8)AVDD CMOS: Setup time increases by (9xTs/26), Hold time reduces by (9xTs/26) LVDS: Setup time increases by (4xTs/26), Hold time reduces by (4xTs/26) (5/8)AVDD CMOS Setup time increases by (3xTs/26), Hold time reduces by (3xTs/26) Default output clock position (Setup/hold timings of output data with respect to this clock position is specified in the AVDD timing characteristics table). (1) Ts 1/Sampling frequency Table DFS ANALOG CONTROL PIN DFS (3/8)AVDD complement data and parallel CMOS output (5/8)AVDD Offset binary data and parallel CMOS output AVDD Offset binary data and DDR LVDS output Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

To□Parallel□Pin GND GND AVDD AVDD (5/8) AVDD (5/8) AVDD (3/8) AVDD (3/8) AVDD S0321-01 SERIAL INTERFACE Register Initialization ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Table MODE ANALOG CONTROL PIN MODE reference, LOW SPEED mode disabled (for Fs 100 MSPS) (3/8)AVDD External reference, LOW SPEED mode disabled (for Fs 100 MSPS) (5/8)AVDD External reference, LOW SPEED mode enabled (for Fs 100 MSPS) AVDD Internal reference, LOW SPEED mode enabled (for Fs 100 MSPS) Figure Simple Scheme to Configure Parallel Pins SEN and SCLK The ADC has a set of internal registers, which can be accessed by the serial interface formed by pins SEN (Serial interface Enable), SCLK (Serial Interface Clock) and SDATA (Serial Interface Data). Serial shift of bits into the device is enabled when SEN is low. Serial data SDATA is latched at every falling edge of SCLK when SEN is active (low). The serial data is loaded into the register at every th SCLK falling edge when SEN is low. In case the word length exceeds a multiple of bits, the excess bits are ignored. Data can be loaded in multiple of 16-bit words within a single active SEN pulse. The first bits form the register address and the remaining bits are the register data. The interface can work with SCLK frequency from MHz down to low speeds (few Hertz) and also with non-50% SCLK duty cycle. After power-up, the internal registers MUST be initialized to their default values. This can be done in one of two ways: Either through hardware reset by applying a high-going pulse on RESET pin (of width greater than 10ns) as shown in Figure OR By applying software reset. Using the serial interface, set the RESET bit (D7 in register 0x00) to HIGH. This initializes internal registers to their default values and then self-resets the RESET bit to LOW. In this case the RESET pin is kept LOW. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

Register Address Register□Data t(SCLK) t(DSU) t(DH) t(SLOADS) D7A7 D3A3 D5A5 D1A1 D6A6 D2A2 D4A4 D0A0SDATA SCLK SEN RESET t(SLOADH) SERIAL INTERFACE TIMING CHARACTERISTICS SERIAL REGISTER READOUT ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure Serial Interface Timing Typical values at min and max values across the full temperature range T MIN C to T MAX AVDD 3.3V, DRVDD 1.8V, unless otherwise noted. PARAMETER MIN TYP MAX UNIT f SCLK SCLK frequency tSCLK) DC MHz t SLOADS SEN to SCLK setup time ns t SLOADH SCLK to SEN hold time ns t DS SDATA setup time ns t DH SDATA hold time ns The device includes an option where the

contents

back. This may be useful as a diagnostic check to verify the serial interface communication between the external controller and the ADC. First, set register bit SERIAL READOUT This also disables any further writes into the registers (EXCEPT register bit SERIAL READOUT itself). Initiate a serial interface cycle specifying the address of the register (A7-A0) whose content has to be read. The device outputs the (D7-D0) of the selected register on OVR_SDOUT pin. The external controller can latch the SCLK. To enable register writes, reset register bit SERIAL READOUT Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

OVR_SDOUT Register Address□(A7:A0)□=□0x3F Register□Data□(D7:D0)□=□XX□(Don't□Care) B)□Read□contents□of□register□0x3F. This□register□has□been□initialized□with□0x04□(device□is□put□in□global□power□down□mode) Pin□OVR_SDOUT functions□as□serial□readout□(<SERIAL READOUT>□=□1) D70 D30 D50 D10 D60 D20 D40 D00SDATA SCLK SEN OVR_SDOUT Register Address□(A7:A0)□=□0x00 Register□Data□(D7:D0)□=□0x01 A)□Enable□serial□readout□(<SERIAL READOUT>□=□1) Pin□OVR_SDOUT functions□as□OVR□(<SERIAL READOUT>□=□0) ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Figure Serial Readout Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

Power□Supply AVDD,□DRVDD RESET SEN SERIAL REGISTER MAP ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Typical values at min and max values across the full temperature range T MIN C to T MAX unless otherwise noted. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT t Power-on delay Delay from power-up of AVDD and DRVDD to RESET pulse active ms ns t Reset pulse width Pulse width of active RESET signal that will reset the serial registers µ s t Delay from RESET disable to SEN active 100 ns Figure Reset Timing Diagram Table Summary of Functions Supported by Serial Interface (1) REGISTER ADDRESS REGISTER FUNCTIONS IN HEX RESET SERIAL Software READOUT Reset ENABLE LOW SPEED MODE REF PDN PDN STANDBY GLOBAL OBUF Internal or external reference LVDS CMOS Output interface CLKOUT POSN Output clock position control DATA FORMAT complement or offset binary CUSTOM PATTERN LOW CUSTOM PATTERN HIGH ENABLE OFFSET CORR OFFSET CORR TIME CONSTANT FINE GAIN Offset correction time constant TEST PATTERNS PROGRAM OFFSET PEDESTAL (1) Multiple functions in a register can be programmed in a single write operation. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com IN HEX SERIA RESET L READO Software Reset UT RESET Software reset applied resets all internal registers and self-clears to SERIAL READOUT Serial readout disabled Serial readout enabled, Pin OVR_SDOUT functions as serial data readout. IN HEX ENABLE LOW SPEED MODE ENABLE LOW SPEED MODE LOW SPEED mode disabled. Use for sampling frequency 100 MSPS Enable LOW SPEED mode for sampling frequencies 100 MSPS. IN HEX PDN PDN REF STANDBY GLOBAL OBUF PDN OBUF Power down output buffer Output buffer enabled Output buffer powered down STANDBY Normal operation ADC alone powered down. Internal references, output buffers are active. Quick wake-up time PDN GLOBAL Normal operation Total power down ADC, internal references and output buffers are powered down. Slow wake-up time. D6,D5 REF Internal or external reference selection MODE pin controls reference selection Internal reference enabled External reference enabled IN HEX LVDS CMOS D7,D6 LVDS CMOS DFS pin controls LVDS or CMOS interface selection DDR LVDS interface Parallel CMOS interface Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 IN HEX CLKOUT POSN Output clock position control LVDS Interface D7-D5 CLKOUT POSN Output clock rising edge position 000 Default output clock position (refer to timing specification table) 100 Default output clock position (refer to timing specification table) 101 Rising edge shifted by (4/26)Ts 110 Rising edge aligned with data transition 111 Rising edge shifted by (4/26)Ts D4-D2 CLKOUT POSN Output clock falling edge position 000 Default output clock position (refer to timing specification table) 100 Default output clock position (refer to timing specification table) 101 Falling edge shifted by (4/26)Ts 110 Falling edge aligned with data transition 111 Falling edge shifted by (4/26)Ts CMOS Interface D7-D5 CLKOUT POSN Output clock rising edge position 000 Default output clock position (refer to timing specification table) 100 Default output clock position (refer to timing specification table) 101 Rising edge shifted by (4/26)Ts 110 Rising edge shifted by (6/26)Ts 111 Rising edge aligned with data transition D4-D2 CLKOUT POSN Output clock falling edge position 000 Default output clock position (refer to timing specification table) 100 Default output clock position (refer to timing specification table) 101 Falling edge shifted by (4/26)Ts 110 Falling edge shifted by (6/26)Ts 111 Falling edge aligned with data transition T s 1/Sampling Frequency IN HEX DATA FORMAT complement or offset binary D2,D1 DATA FORMAT DFS pin controls data format selection 2's complement Offset binary IN HEX Custom Pattern Custom Pattern Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com CUSTOM LOW lower bits of custom pattern available at the output instead of ADC data. CUSTOM HIGH upper bits of custom pattern available at the output instead of ADC data IN HEX ENABLE OFFSET CORR Offset correction enable ENABLE OFFSET CORR Offset correction disabled Offset correction enabled IN HEX OFFSET CORR TC Offset correction time FINE GAIN constant OFFSET CORR TC Time constant of correction loop in number of clock cycles. See "Offset Correction" in application section. 0000 256 k 0001 512 k 0010 M 0011 M 0100 M 0101 M 0110 M 0111 M 1000 M 1001 128 M 1010 256 M 1011 512 M 1100 to 1111 RESERVED FINE GAIN Gain programmability in 0.5 dB steps 0000 dB gain, default after reset 0001 0.5 dB gain 0010 1.0 dB gain 0011 1.5 dB gain 0100 2.0 dB gain 0101 2.5 dB gain 0110 3.0 dB gain 0111 3.5 dB gain 1000 4.0 dB gain 1001 4.5 dB gain 1010 5.0 dB gain 1011 5.5 dB gain 1100 6.0 dB gain Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 IN HEX TEST PATTERNS TEST PATTERNS Test Patterns to verify data capture 000 Normal operation 001 Outputs all zeros 010 Outputs all ones 011 Outputs toggle pattern ADS6149/8: Output data D13:D0 alternates between 10101010101010 and 01010101010101 every clock cycle. ADS6129/8: Output data D11:D0 alternates between 101010101010 and 010101010101 every clock cycle. 100 Outputs digital ramp ADS6149/8: Output data increments by one LSB (14-bit) every clock cycle from code to code 16383 ADS6129/8: Output data increments by one LSB (124-bit) every th clock cycle from code to code 4095 101 Outputs custom pattern as specified in registers 0x51 and 0x52. 110 Unused 111 Unused IN HEX OFFSET PEDESTAL OFFSET PEDESTAL When the offset correction is enabled, the final converged value after the offset is corrected will be the ADC mid-code value. A pedestal can be added to the final converged value by programming these bits. For example, See "Offset Correction" in application section. 011111 Mid-code LSB 011110 Mid-code LSB 011101 Mid-code LSB .... 000000 Mid-code 111111 Mid-code LSB 111110 Mid-code LSB .... 100000 Mid-code LSB Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

M DRVDD AGND OVR_SDOUT IN P CLKOUTM IN M CLKOUTP AGND DFS AVDD OE AG ND AVDD AVDD AGND NC CLKP AVD D CLKM M ODE AGND AVDD 13 14 15 16 17 18 19 20 21 22 23 24 DRGND D12_ D13_P DRVDD D12_D13 D0_D1_P D10 _D11_P D0_D1_M D10_D1 1_M NC _D9_P NC D8_D9_M RESET D6_ D7_P SCLK D6_D7_ M SDA T A _D5_P SEN D4_D5 A VDD D2_D3 AGND _D3_M 48 47 46 45 44 43 42 41 40 39 38 37 Thermal□Pad Pad□is□connected□to□DRGND P0023-13 DRGND VC M DRVDD AGND OVR_SDOUT IN P CLKOUTM IN M CLKOUTP AGND DFS AVDD OE AG ND AVDD AVDD AGND NC CLKP AVD D CLKM M ODE AGND AVDD 13 14 15 16 17 18 19 20 21 22 23 24 DRGND D10_ D11_P DRVDD D10_D11 NC D8_ D9_P NC D8_D9_ M NC _D7_P NC D6_D7_M RESET D4_ D5_P SCLK D4_D5_ M SDA T A _D3_P SEN D2_D3 A VDD D0_D1 AGND _D1_M 48 47 46 45 44 43 42 41 40 39 38 37 Thermal□Pad Pad□is□connected□to□DRGND ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Figure PIN CONFIGURATION (LVDS MODE) ADS6149/48 Figure 10. PIN CONFIGURATION (LVDS MODE) ADS6129/28 Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Table PIN ASSIGNMENTS (LVDS MODE) ADS6149/48 and ADS6129/28 PIN NO. I/O of NO. PINS 18, 20, AVDD I 3.3-V Analog power supply 22, 24, 12, 14, AGND I Analog ground 17, 19, CLKP, CLKM 10, I Differential clock input INP, INM 15, I Differential analog input Internal reference mode Common-mode voltage output. VCM IO External reference mode Reference input. The voltage forced on this pin sets the internal references Serial interface RESET input. When using the serial interface mode, the user MUST initialize internal registers through hardware RESET by applying a high-going pulse on this pin or by using software reset option. Refer to SERIAL INTERFACE section. RESET I In parallel interface mode, the user has to tie RESET pin permanently HIGH. (SDATA and SEN are used as parallel pin controls in this mode) The pin has an internal 100 k Ω pull-down resistor. SCLK I Serial interface clock input. The pin has an internal 100 k Ω pull-down resistor. This pin functions as serial interface data input when RESET is LOW. It functions as power down control pin when RESET is tied high. SDATA I See Table for detailed information. The pin has an internal 100 k Ω pull-down resistor. This pin functions as serial interface enable input when RESET is low. It functions as output clock edge control when RESET is tied high. See Table for detailed SEN I information. The pin has an internal 100 k Ω pull-up resistor to AVDD. OE I Output buffer enable input, active high. The pin has an internal 100 k Ω pull-up resistor to AVDD. Data Format Select input. This pin sets the DATA FORMAT (2s complement or Offset binary) and the LVDS/CMOS output interface type. DFS I See Table for detailed information. Internal or external reference selection and low speed mode control. control. See Table for detailed MODE (1) I information. CLKOUTP O Differential output clock, true CLKOUTM O Differential output clock, complement D0_D1_P O Differential output data and multiplexed, true D0_D1_M O Differential output data and multiplexed, complement D2_D3_P O Differential output data and multiplexed, true D2_D3_M O Differential output data and multiplexed, complement D4_D5_P O Differential output data and multiplexed, true D4_D5_M O Differential output data and multiplexed, complement See D6_D7_P O Differential output data and multiplexed, true Figure and D6_D7_M O Differential output data and multiplexed, complement Figure D8_D9_P O Differential output data and multiplexed, true D8_D9_M O Differential output data and multiplexed, complement D10_D11_P O Differential output data D10 and D11 multiplexed, true D10_D11_M O Differential output data D10 and D11 multiplexed, complement D12_D13_P O Differential output data D12 and D13 multiplexed, true D12_D13_M O Differential output data D12 and D13 multiplexed, complement It is a CMOS output with logic levels determined by DRVDD supply. It functions as out-of-range indicator after OVR_SDOUT O reset and when register bit SERIAL READOUT It functions as serial register readout pin when register bit SERIAL READOUT (1) In the next generation pin-compatible ADC family, MODE will be converted to a digital control pin for certain reserved functions. So, the selection of internal or external reference and low speed functions will not be supported using MODE. In the system board using ADS61x9/x8, the MODE pin can be routed to a digital controller. This will avoid board modification while migrating to the next generation ADC. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com Table PIN ASSIGNMENTS (LVDS MODE) ADS6149/48 and ADS6129/28 (continued) PIN NO. I/O of NO. PINS DRVDD I 1.8 V Digital and output buffer supply DRGND 36, PAD I Digital and output buffer ground See Figure NC Do not connect and Figure Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

M DRVDD AGND OVR_SDOUT IN P UNUSED IN M CLKOUT AGND DFS AVDD OE AG ND AVDD AVDD AGND NC CLKP AVD D CLKM M ODE AGND AVDD 13 14 15 16 17 18 19 20 21 22 23 24 DRGND D13 DRVDD D12 D11 D10 NC NC RESET SCLK SDA T A SEN A VDD AGND 48 47 46 45 44 43 42 41 40 39 38 37 Thermal□Pad Pad□is□connected□to□DRGND P0023-15 DRGND VC M DRVDD AGND OVR_SDOUT IN P UNUSED IN M CLKOUT AGND DFS AVDD OE AG ND AVDD AVDD AGND NC CLKP AVD D CLKM M ODE AGND AVDD 13 14 15 16 17 18 19 20 21 22 23 24 DRGND D11 DRVDD D10 NC NC NC NC RESET SCLK SDA T A SEN A VDD AGND 48 47 46 45 44 43 42 41 40 39 38 37 Thermal□Pad Pad□is□connected□to□DRGND ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure 11. PIN CONFIGURATION (CMOS MODE) ADS6149/48 Figure 12. PIN CONFIGURATION (CMOS MODE) ADS6129/28 Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com PIN ASSIGNMENTS (CMOS MODE) ADS6149/48 and ADS6129/28 PIN NO. of I/O NO. 18, 20, 3.3-V Analog power supply AVDD I 22, 24, 12, 14, Analog ground AGND I 17, 19, CLKP, CLKM 10, I Differential clock input INP, INM 15, I Differential analog input Internal reference mode Common-mode voltage output. VCM IO External reference mode Reference input. The voltage forced on this pin sets the internal references Serial interface RESET input. When using the serial interface mode, the user MUST initialize internal registers through hardware RESET by applying a high-going pulse on this pin or by using software reset option. Refer to SERIAL INTERFACE section. RESET I In parallel interface mode, the user has to tie RESET pin permanently HIGH. (SDATA and SEN are used as parallel pin controls in this mode) The pin has an internal 100 k Ω pull-down resistor. SCLK I Serial interface clock input. The pin has an internal 100 k Ω pull-down resistor. This pin functions as serial interface data input when RESET is LOW. It functions as power down control pin when RESET is tied high. SDATA I See Table for detailed information. The pin has an internal 100 k Ω pull-down resistor. This pin functions as serial interface enable input when RESET is low. It functions as output clock edge control when RESET is tied high. See Table for detailed SEN I information. The pin has an internal 100 k Ω pull-up resistor to AVDD. Data Format Select input. This pin sets the DATA FORMAT (2s complement or Offset binary) and the LVDS/CMOS output interface type. DFS I See Table for detailed information. Internal or external reference selection control and low speed mode control. See Table for MODE I detailed information. CLKOUT O CMOS output clock OE I Output buffer enable input, active high. The pin has an internal 100 k Ω pull-up resistor to AVDD. CLKOUTM O Differential output clock, complement See Figure D13 O bit/12 bit CMOS output data and Figure It is a CMOS output with logic levels determined by DRVDD supply. It functions as out-of-range OVR_SDOUT O indicator after reset and when register bit SERIAL READOUT It functions as serial register readout pin when SERIAL READOUT DRVDD I 1.8 V Digital and output buffer supply DRGND 36, PAD I Digital and output buffer ground UNUSED Unused pin in CMOS mode See Figure NC Do not connect and Figure Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G001 SFDR = 94.6 dBc SINAD = 73.3 dBFS SNR = 73.4 dBFS THD = 90.2 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G002 SFDR = 87.7 dBc SINAD = 72.7 dBFS SNR = 73 dBFS THD = 84 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G003 SFDR = 81.8 dBc SINAD = 70.8 dBFS SNR = 71.3 dBFS THD = 79.7 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G004 SFDR = 76.3 dBc SINAD = 68.1 dBFS SNR = 69.1 dBFS THD = 73.8 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G005 fIN1 = 185.1 MHz, –7 dBFS fIN2 = 190.1 MHz, –7 dBFS 2-Tone IMD = –90.6 dBFS SFDR = –91 dBFS f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G006 fIN1 = 185.1 MHz, –36 dBFS fIN2 = 190.1 MHz, –36 dBFS 2-Tone IMD = –105 dBFS SFDR = –103 dBFS ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, dBFS differential analog input, internal reference mode, dB gain, LVDS output interface, 32K point FFT (unless otherwise noted) FFT for MHz INPUT SIGNAL FFT for MHz INPUT SIGNAL Figure 13. Figure 14. FFT for 170 MHz INPUT SIGNAL FFT for 300 MHz INPUT SIGNAL Figure 15. Figure 16. FFT for 2-TONE INPUT SIGNAL (IMD) FFT for 2-TONE INPUT SIGNAL (IMD) Figure 17. Figure 18. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G007 CMOS LVDS fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SNR − dBFS G008 CMOS LVDS fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G009 Input adjusted to get −1dBFS input 1 dB 0 dB 5 dB 6 dB 3 dB 2 dB 4 dB fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SINAD − dBFS G010 1 dB 3 dB 4 dB 6 dB 2 dB 0 dB 5 dB Input adjusted to get −1dBFS input ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6149 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, dBFS differential analog input, internal reference mode, dB gain, LVDS output interface, 32K point FFT (unless otherwise noted) SFDR SNR vs vs INPUT FREQUENCY INPUT FREQUENCY Figure 19. Figure 20. SFDR SINAD vs vs GAIN GAIN Figure 21. Figure 22. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

SNR − dBFS VCM − Common-Mode Voltage of Analog Inputs − V fIN = 60 MHz SFDR − dBc G012 SNR SFDR SNR − dBFS Input Amplitude − dBFS 100 110 SFDR − dBc, dBFS G011 SFDR (dBc) SFDR (dBFS) SNR (dBFS) fIN = 60 MHz SNR − dBFS AVDD − Supply Voltage − V G013 SFDR − dBc SNR SFDR fIN = 60.1 MHz DRV DD = 1.8 V SNR − dBFS DRV DD − Supply Voltage − V G014 SFDR − dBc SNR SFDR fIN = 60.1 MHz AVDD = 3.3 V ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 TYPICAL CHARACTERISTICS ADS6149 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, dBFS differential analog input, internal reference mode, dB gain, LVDS output interface, 32K point FFT (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs INPUT AMPLITUDE INPUT COMMON-MODE VOLTAGE Figure 23. Figure 24. PERFORMANCE PERFORMANCE vs vs AVDD SUPPLY DRVDD SUPPLY Figure 25. Figure 26. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

T − Temperature − °C G015 SNR − dBFS −40 −20 0 20 40 60 80 SFDR − dBc SFDR SNR fIN = 60 MHz SNR − dBFS SFDR − dBc Input Clock Amplitude − VPP G016 SNR SFDR fIN = 60 MHz SNR − dBFS VVCM − VCM Voltage − V fIN = 60 MHz External Reference Mode SFDR − dBc G018 SNR SFDR SNR − dBFS Input Clock Duty Cycle − % G017 30 35 40 45 50 55 60 65 70 SFDR − dBc SNR SFDR fIN = 5 MHz 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 Occurence − % RMS (LSB) = 0.995 Output Code G019 ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6149 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, dBFS differential analog input, internal reference mode, dB gain, LVDS output interface, 32K point FFT (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs TEMPERATURE INPUT CLOCK AMPLITUDE Figure 27. Figure 28. PERFORMANCE PERFORMANCE vs vs INPUT CLOCK DUTY CYCLE VCM VOLTAGE Figure 29. Figure 30. OUTPUT NOISE HISTOGRAM Figure 31. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G020 SFDR = 90.75 dBc SINAD = 73.13 dBFS SNR = 73.25 dBFS THD = 87.76 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G021 SFDR = 92.3 dBc SINAD = 72.9 dBFS SNR = 73 dBFS THD = 89 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G022 SFDR = 82.44 dBc SINAD = 70.81 dBFS SNR = 71.17 dBFS THD = 80.89 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G023 SFDR = 76.3 dBc SINAD = 68.5 dBFS SNR = 69.3 dBFS THD = 75.1 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G024 fIN1 = 185.1 MHz, –7 dBFS fIN2 = 190.1 MHz, –7 dBFS 2-Tone IMD = –90 dBFS SFDR = –88 dBFS f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G025 fIN1 = 185.1 MHz, –36 dBFS fIN2 = 190.1 MHz, –36 dBFS 2-Tone IMD = –101 dBFS SFDR = –97 dBFS ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) FFT for MHz INPUT SIGNAL FFT for MHz INPUT SIGNAL Figure 32. Figure 33. FFT for 170 MHz INPUT SIGNAL FFT for 300 MHz INPUT SIGNAL Figure 34. Figure 35. FFT for 2-TONE INPUT SIGNAL (IMD) FFT for 2-TONE INPUT SIGNAL (IMD) Figure 36. Figure 37. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G026 CMOS LVDS fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SNR − dBFS G027 CMOS LVDS fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G028 Input adjusted to get −1dBFS input 1 dB 0 dB 5 dB 3 dB 2 dB 4 dB 6 dB fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SINAD − dBFS G029 3 dB 4 dB 2 dB 0 dB 5 dB 1 dB Input adjusted to get −1dBFS input 6 dB ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6148 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) SFDR SNR vs vs INPUT FREQUENCY INPUT FREQUENCY Figure 38. Figure 39. SFDR SINAD vs vs GAIN GAIN Figure 40. Figure 41. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

SNR − dBFS Input Amplitude − dBFS 100 110 SFDR − dBc, dBFS G030 SFDR (dBc) SFDR (dBFS) SNR (dBFS) fIN = 60 MHz SNR − dBFS VCM − Common-Mode Voltage of Analog Inputs − V fIN = 60.1 MHz SFDR − dBc G031 SNR SFDR SNR − dBFS AVDD − Supply Voltage − V G032 SFDR − dBc SNR SFDR fIN = 60.1 MHz DRV DD = 1.8 V SNR − dBFS DRV DD − Supply Voltage − V G033 SFDR − dBc SNR SFDR fIN = 60.1 MHz AVDD = 3.3 V ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 TYPICAL CHARACTERISTICS ADS6148 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs INPUT AMPLITUDE INPUT COMMON-MODE VOLTAGE Figure 42. Figure 43. PERFORMANCE PERFORMANCE vs vs AVDD SUPPLY DRVDD SUPPLY Figure 44. Figure 45. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

T − Temperature − °C G034 SNR − dBFS −40 −20 0 20 40 60 80 SFDR − dBc SFDR SNR fIN = 60.1 MHz SNR − dBFS SFDR − dBc Input Clock Amplitude − VPP G035 SNR SFDR fIN = 60 MHz SNR − dBFS Input Clock Duty Cycle − % G036 30 35 40 45 50 55 60 65 70 SFDR − dBc SNR SFDR fIN = 5 MHz SNR − dBFS VVCM − VCM Voltage − V fIN = 60.1 MHz External Reference Mode SFDR − dBc G037 SNR SFDR 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 Occurence − % RMS (LSB) = 1 Output Code G038 ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6148 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs TEMPERATURE INPUT CLOCK AMPLITUDE Figure 46. Figure 47. PERFORMANCE PERFORMANCE vs vs INPUT CLOCK DUTY CYCLE VCM VOLTAGE Figure 48. Figure 49. OUTPUT NOISE HISTOGRAM Figure 50. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G039 SFDR = 94.87 dBc SINAD = 70.73 dBFS SNR = 70.77 dBFS THD = 89.9 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G040 SFDR = 87.8 dBc SINAD = 70.5 dBFS SNR = 70.6 dBFS THD = 84 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G041 SFDR = 81.9 dBc SINAD = 69.2 dBFS SNR = 69.5 dBFS THD = 79.7 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G042 SFDR = 76.09 dBc SINAD = 67.13 dBFS SNR = 67.95 dBFS THD = 73.72 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G043 fIN1 = 185.1 MHz, –7 dBFS fIN2 = 190.1 MHz, –7 dBFS 2-Tone IMD = –90.5 dBFS SFDR = –91 dBFS f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 25 50 75 100 125 Amplitude − dB G044 fIN1 = 185.1 MHz, –36 dBFS fIN2 = 190.1 MHz, –36 dBFS 2-Tone IMD = –103 dBFS SFDR = –97 dBFS ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) FFT for MHz INPUT SIGNAL FFT for MHz INPUT SIGNAL Figure 51. Figure 52. FFT for 170 MHz INPUT SIGNAL FFT for 300 MHz INPUT SIGNAL Figure 53. Figure 54. FFT for 2-TONE INPUT SIGNAL (IMD) FFT for 2-TONE INPUT SIGNAL (IMD) Figure 55. Figure 56. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G045 CMOS LVDS fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SNR − dBFS G046 CMOS LVDS fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G047 Input adjusted to get −1dBFS input 1 dB 0 dB 5 dB 3 dB 2 dB 4 dB 6 dB fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SINAD − dBFS G048 3 dB 4 dB Input adjusted to get −1dBFS input 0 dB 1 dB 2 dB 5 dB 6 dB ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6129 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) SFDR SNR vs vs INPUT FREQUENCY INPUT FREQUENCY Figure 57. Figure 58. SFDR SINAD vs vs GAIN GAIN Figure 59. Figure 60. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

SNR − dBFS Input Amplitude − dBFS 100 110 SFDR − dBc, dBFS G049 SFDR (dBc) SFDR (dBFS) SNR (dBFS) fIN = 60 MHz SNR − dBFS VCM − Common-Mode Voltage of Analog Inputs − V fIN = 60 MHz SFDR − dBc G050 SNR SFDR SNR − dBFS DRV DD − Supply Voltage − V G052 SFDR − dBc SNR SFDR fIN = 60.1 MHz AVDD = 3.3 V SNR − dBFS AVDD − Supply Voltage − V G051 SFDR − dBc SNR SFDR fIN = 60.1 MHz DRV DD = 1.8 V ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 TYPICAL CHARACTERISTICS ADS6129 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs INPUT AMPLITUDE INPUT COMMON-MODE VOLTAGE Figure 61. Figure 62. PERFORMANCE PERFORMANCE vs vs AVDD SUPPLY DRVDD SUPPLY Figure 63. Figure 64. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

T − Temperature − °C G053 SNR − dBFS −40 −20 0 20 40 60 80 SFDR − dBc SFDR SNR fIN = 60 MHz SNR − dBFS SFDR − dBc Input Clock Amplitude − VPP G054 SNR SFDR fIN = 60 MHz SNR − dBFS Input Clock Duty Cycle − % G055 30 35 40 45 50 55 60 65 70 SFDR − dBc SNR SFDR fIN = 5 MHz SNR − dBFS VVCM − VCM Voltage − V fIN = 60.1 MHz External Reference Mode SFDR − dBc G056 SNR SFDR 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 Occurence − % Output Code G057 ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6129 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs TEMPERATURE INPUT CLOCK AMPLITUDE Figure 65. Figure 66. PERFORMANCE PERFORMANCE vs vs INPUT CLOCK DUTY CYCLE VCM VOLTAGE Figure 67. Figure 68. OUTPUT NOISE HISTOGRAM Figure 69. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G058 SFDR = 90.8 dBc SINAD = 70.6 dBFS SNR = 70.7 dBFS THD = 87.8 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G059 SFDR = 92.5 dBc SINAD = 70.5 dBFS SNR = 70.6 dBFS THD = 88.9 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G060 SFDR = 82.59 dBc SINAD = 69.18 dBFS SNR = 69.42 dBFS THD = 80.99 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G061 SFDR = 76.3 dBc SINAD = 67.5 dBFS SNR = 68.1 dBFS THD = 75.1 dBc f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G062 fIN1 = 185.1 MHz, –7 dBFS fIN2 = 190.1 MHz, –7 dBFS 2-Tone IMD = –90 dBFS SFDR = –88 dBFS f − Frequency − MHz −160 −140 −120 −100 −80 −60 −40 −20 0 20 40 60 80 100 Amplitude − dB G063 fIN1 = 185.1 MHz, –36 dBFS fIN2 = 190.1 MHz, –36 dBFS 2-Tone IMD = –101 dBFS SFDR = –96 dBFS ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) FFT for MHz INPUT SIGNAL FFT for MHz INPUT SIGNAL Figure 70. Figure 71. FFT for 170 MHz INPUT SIGNAL FFT for 300 MHz INPUT SIGNAL Figure 72. Figure 73. FFT for 2-TONE INPUT SIGNAL (IMD) FFT for 2-TONE INPUT SIGNAL (IMD) Figure 74. Figure 75. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G064 CMOS LVDS fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SNR − dBFS G065 CMOS LVDS fIN − Input Frequency − MHz 100 0 50 100 150 200 250 300 350 400 450 500 SFDR − dBc G066 Input adjusted to get −1dBFS input 1 dB 0 dB 5 dB 3 dB 2 dB 4 dB 6 dB fIN − Input Frequency − MHz 0 50 100 150 200 250 300 350 400 450 500 SINAD − dBFS G067 3 dB 4 dB Input adjusted to get −1dBFS input 0 dB 1 dB 2 dB 5 dB 6 dB ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6128 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) SFDR SNR vs vs INPUT FREQUENCY INPUT FREQUENCY Figure 76. Figure 77. SFDR SINAD vs vs GAIN GAIN Figure 78. Figure 79. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

SNR − dBFS Input Amplitude − dBFS 100 110 SFDR − dBc, dBFS G068 SFDR (dBc) SFDR (dBFS) SNR (dBFS) fIN = 60 MHz SNR − dBFS VCM − Common-Mode Voltage of Analog Inputs − V fIN = 60 MHz SFDR − dBc G069 SNR SFDR SNR − dBFS AVDD − Supply Voltage − V G070 SFDR − dBc SNR SFDR fIN = 60.1 MHz DRV DD = 1.8 V SNR − dBFS DRV DD − Supply Voltage − V G071 SFDR − dBc SNR SFDR fIN = 60.1 MHz AVDD = 3.3 V ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 TYPICAL CHARACTERISTICS ADS6128 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs INPUT AMPLITUDE INPUT COMMON-MODE VOLTAGE Figure 80. Figure 81. PERFORMANCE PERFORMANCE vs vs AVDD SUPPLY DRVDD SUPPLY Figure 82. Figure 83. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

T − Temperature − °C G072 SNR − dBFS −40 −20 0 20 40 60 80 SFDR − dBc SFDR SNR fIN = 60.1 MHz SNR − dBFS SFDR − dBc Input Clock Amplitude − VPP G073 SNR SFDR fIN = 60 MHz SNR − dBFS Input Clock Duty Cycle − % G074 30 35 40 45 50 55 60 65 70 SFDR − dBc SNR SFDR fIN = 5 MHz SNR − dBFS VVCM − VCM Voltage − V fIN = 60.1 MHz External Reference Mode SFDR − dBc G075 SNR SFDR 2048 2049 2050 2051 2052 2053 2054 2055 2056 Occurence − % Output Code G076 ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com TYPICAL CHARACTERISTICS ADS6128 (continued) All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) PERFORMANCE PERFORMANCE vs vs TEMPERATURE INPUT CLOCK AMPLITUDE Figure 84. Figure 85. PERFORMANCE PERFORMANCE vs vs INPUT CLOCK DUTY CYCLE VCM VOLTAGE Figure 86. Figure 87. OUTPUT NOISE HISTOGRAM Figure 88. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

fIN − Input Frequency − MHz −100 −90 −80 −70 −60 −50 −40 −30 −20 −10 0 20 40 60 80 100 CMRR − dB G079 fS − Sampling Frequency − MSPS 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 50 100 150 200 250 P − Total Power − W G077 CMOS LVDS C L = 10 pF fS − Sampling Frequency − MSPS 100 0 50 100 150 200 250 IDRVDD − DRVDD Current − mA G078 CMOS LVDS fIN = 3 MHz C L = 10 pF OE Disabled ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 All plots are at AVDD 3.3 DRVDD 1.8 maximum rated sampling frequency, sine wave input clock. 1.5 V PP differential clock amplitude, 50% clock duty cycle, DBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) CMRR TOTAL POWER vs vs INPUT FREQUENCY SAMPLING FREQUENCY Figure 89. Figure 90. DRVDD CURRENT vs SAMPLING FREQUENCY Figure 91. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

ADS6149/ADS6148/ADS6129/ADS6128 20 50 150 200 f -□Input□Frequency□-□MHzIN f -□Sampling□Frequency□-□MSPSS SFDR□-□dBc 250 350 500 100 200 120 140 160 180 220 240 250 65 70 75 M0049-17 8088 80 85 100 300 90 95 450400 8888 20 200 300 f -□Input□Frequency□-□MHzIN f -□Sampling□Frequency□-□MSPSS SFDR□-□dBc 400 800 100 200 120 140 160 180 220 240 250 65 70 M0049-18 7276 84 84 80 85 100 500 90 95 700600 ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Plots are at AVDD 3.3V, DRVDD 1.8 sine wave input clock, 1.5 V PP differential clock amplitude, 50% clock duty cycle, dBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) Figure 92. SFDR Contour Plot dB gain) Figure 93. SFDR Contour Plot dB gain) Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

f -□Input□Frequency□-□MHzIN f -□Sampling□Frequency□-□MSPSS SNR□-□dBFS 250 350 500 100 200 120 140 160 180 220 240 250 66 67 68 M0048-19 6566 69 70 100 300 71 74 450400 65 7572 73 20 200 300 f -□Input□Frequency□-□MHzIN f -□Sampling□Frequency□-□MSPSS SNR□-□dBFS 400 800 100 200 120 140 160 180 220 240 250 61 63 M0048-20 6465 6566 6667 64 65 100 500 67 69 700600 62 66 68 ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Plots are at AVDD 3.3V, DRVDD 1.8 sine wave input clock, 1.5 V PP differential clock amplitude, 50% clock duty cycle, dBFS differential analog input, internal reference mode, dB gain, LVDS output interface (unless otherwise noted) Figure 94. SNR Contour Plot dB gain) Figure 95. SNR Contour Plot dB gain) Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

~ 1 pF Csamp 2 pF RCR□Filter Sampling Capacitor Sampling Switch Sampling Switch Ron 15 /c87 Ron 15 /c87 Csamp 2□pF10 /c87 10 /c87 100 /c87 100 /c87 3 pF Cpar1 0.25 pF Lpkg~1 nH Cbond ~ 1 pF Resr 200 /c87 Resr 200 /c87 Cpar2 0.5 pF Cpar2 0.5 pF Sampling Capacitor Ron 10 /c87 Lpkg~1 nH 3 pF ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com ADS6149/48 and ADS6129/28 is a family of high performance, low power 14-bit and 12-bit pipeline A/D converters with maximum sampling rate up to 250 MSPS. At every rising edge of the input clock, the analog input signal is sampled and sequentially converted by a pipeline of low resolution stages. In each stage, the sampled and held signal is converted by a high speed, low resolution flash sub-ADC. The difference (residue) between the stage input and its quantized equivalent is gained and propagates to the next stage. At every clock, each succeeding stage resolves the sampled input with greater accuracy. The digital outputs from all stages are combined in a digital correction logic block to create the final or bit code, after a data latency of clock cycles. The digital output is available as either DDR LVDS or parallel CMOS and coded in either straight offset binary or binary complement format. The dynamic offset of the first stage sub-ADC limits the maximum analog input frequency to about 500MHz (with PP amplitude) and about 800MHz (with PP amplitude). The analog input consists of a switched-capacitor based differential sample and hold architecture. This differential topology results in a good AC performance even for high input frequencies at high sampling rates. The INP and INM pins have to be externally biased around a common-mode voltage of 1.5V, available on VCM pin. For a full-scale differential input, each input pin INP, INM has to swing symmetrically between VCM 0.5V and VCM 0.5V, resulting in a 2Vpp differential input swing. Figure 96. Analog Input Equivalent Circuit The input sampling circuit has a high 3-dB bandwidth that extends up to 700 MHz (measured from the input pins to the sampled voltage). Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

0.01 0.1 100 0 100 200 300 400 500 600 700 800 900 1000 f□-□Frequency□-□MHz Resistance□-□k /c87 ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 For optimum performance, the analog inputs must be driven differentially. This improves the common-mode noise immunity and even order harmonic rejection. A Ω to Ω resistor in series with each input pin is recommended to damp out ringing caused by package parasitics. It is also necessary to present low impedance Ω for the common mode switching currents. This can be achieved by using two resistors from each input terminated to the common mode voltage (VCM). Note that the device includes an internal R-C filter from each input to ground. The purpose of this filter is to absorb the glitches caused by the opening and closing of the sampling capacitors. The cut-off frequency of the R-C filter involves a trade-off. A lower cut-off frequency (larger absorbs glitches better, but also reduces the input bandwidth and the maximum input frequency that can be supported. On the other hand, with no internal R-C filter, high input frequency can be supported, but now the sampling glitches need to be supplied by the external driving circuit. This has limitations due to the presence of the package bond-wire inductance. In ADS61x9/x8, the R-C component values have been optimized while supporting high input bandwidth (up to 750 MHz). However, in required, the filtering of the glitches can be improved further using an external R-C-R filter (as shown in Figure and Figure 100 In addition to the above, the drive circuit may have to be designed to provide a low insertion loss over the desired frequency range and matched impedance to the source. While doing this, the ADC input impedance must be considered. Figure and Figure show the impedance (Zin Rin Cin) looking into the ADC input pins. Figure 97. ADC Analog Input Resistance (Rin) Across Frequency Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

1.5 2.5 3.5 4.5 0 100 200 300 400 500 600 700 800 900 1000 f□-□Frequency□-□MHz Capacitance□-□pF Driving Circuit ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Figure 98. ADC Analog Input Capacitance (Cin) Across Frequency Two example driving circuit configurations are shown in Figure and Figure 100 one optimized for low bandwidth (low input frequencies) and the other one for high bandwidth to support higher input frequencies. In Figure an external R-C-R filter using 22pF has been used. Together with the series inductor (39nH), this combination forms a filter and absorbs the sampling glitches. Due to the large capacitor (22pF) in the R-C-R and the Ω resistors in series with each input pin, the drive circuit has low bandwidth, and supports low input frequencies 100MHz).. To support high input frequencies (up to about 300MHz, see Figure 100 the capacitance used in the R-C-R is reduced to 3.3pF and the series inductors are shorted out. Together with the lower series resistors Ω this drive circuit provides high bandwidth and supports high input frequencies. A transformer such as ADT1-1WT or ETC1-1-13 can be used up to 300MHz. In Figure 100 by dropping the external R-C-R filter, the drive circuit has high bandwidth and can support high input frequencies 300MHz). For example, a transformer such as the ADTL2-18 can be used. Note that both the drive circuits have been terminated by Ω near the ADC side. The termination is accomplished using a Ω resistor from each input to the 1.5V common-mode (VCM) from the device. This biases the analog inputs around the required common-mode voltage. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

1:1 1:1 22 pF 50 /c87 0.1 F/c109 0.1 F/c109

0.1 F/c109

39□nH 50 /c87 39□nH

0.1 F/c109 25 /c87

1:1 1:1 25 /c87 3 .3 pF

500 A Fs

250 MSPS

/c109 /c180 (1) REFERENCE ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure 99. Drive Circuit with Low Bandwidth (for low input frequencies) The mismatch in the transformer parasitic capacitance (between the windings) results in degraded even-order harmonic performance. Connecting two identical RF transformers back to back helps minimize this mismatch and good performance is obtained for high frequency input signals. An additional termination resistor pair may be required between the two transformers as shown in the figures. The center point of this termination is connected to ground to improve the balance between the P and M sides. The values of the terminations between the transformers and on the secondary side have to be chosen to get an effective Ω (in the case of Ω source impedance). Figure 100. Drive Circuit with High Bandwidth (for high input frequencies) To ensure a low-noise common-mode reference, the VCM pin is filtered with a 0.1 µ F low-inductance capacitor connected to ground. The VCM pin is designed to directly drive the ADC inputs. The input stage of the ADC sinks a common-mode current in the order of 500 µ A (per input pin, at 250 MSPS). Equation describes the dependency of the common-mode current and the sampling frequency. This equation helps to design the output capability and impedance of the CM driving circuit accordingly. ADS614X/2X has built-in internal references REFP and REFM, requiring no external components. Design schemes are used to linearize the converter load seen by the references; this and the on-chip integration of the requisite reference capacitors eliminates the need for external decoupling. The full-scale input range of the converter can be controlled in the external reference mode as explained below. The internal or external reference modes can be selected by programming the serial interface register bit REF Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com Figure 101. Reference Section When the device is in internal reference mode, the REFP and REFM voltages are generated internally. Common-mode voltage (1.5V nominal) is output on VCM pin, which can be used to externally bias the analog input pins. When the device is in external reference mode, the VCM acts as a reference input pin. The voltage forced on the VCM pin is buffered and gained by 1.33 internally, generating the REFP and REFM voltages. The differential input voltage corresponding to full-scale is given by Equation Full-scale differential input pp (Voltage forced on VCM) 1.33 (2) In this mode, the 1.5V common-mode voltage to bias the input pins has to be generated externally. ADS614X/2X clock inputs can be driven differentially (sine, LVPECL or LVDS) or single-ended (LVCMOS), with little or no difference in performance between them. The common-mode voltage of the clock inputs is set to VCM using internal 5-k Ω resistors. This allows using transformer-coupled drive circuits for sine wave clock or ac-coupling for LVPECL, LVDS clock sources. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

5□k/c87 VCM 5□k/c87 2 pF 20 /c87 Lpkg Cbond ~1pF Lpkg ~1□nH Cbond ~1pF Resr ~100 /c87 Resr CLKM Clock□buffer Ceq Ceq 20 /c87~1□nH ~100 /c87 Ceq□~□1□to□3□pF,□equivalent□input□capacitance□of□clock□buffer S0168-14 CLKP CLKM CMOS□Clock□Input Differential□Sine-Wave or□PECL or□LVDS□Clock□Input www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure 102. Internal Clock Buffer Single-ended CMOS clock can be ac-coupled to the CLKP input, with CLKM connected to ground with a 0.1- µ F capacitor, as shown in Figure 104 For best performance, the clock inputs have to be driven differentially, reducing susceptibility to common-mode noise. For high input frequency sampling, it is recommended to use a clock source with low jitter. Band-pass filtering of the clock source can help reduce the effect of jitter. There is no change in performance with a non-50% duty cycle clock input. Figure 103. Differential Clock Driving Circuit Figure 104. Single-Ended Clock Driving Circuit Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com ADS614X/2X includes gain settings that can be used to get improved SFDR performance (compared to no gain). The gain is programmable from 0dB to 6dB (in 0.5 dB steps). For each gain setting, the analog input full-scale range scales proportionally, as shown in Table The SFDR improvement is achieved at the expense of SNR; for each gain setting, the SNR degrades about 0.5 1dB. The SNR degradation is less at high input frequencies. As a result, the gain is useful at high input frequencies as the SFDR improvement is significant with marginal degradation in SNR. So, the gain can be used to trade-off between SFDR and SNR. Note that the default gain after reset is dB. Table Full-Scale Range Across Gains Gain, dB Type Full-Scale, V PP Default after reset 1.78 1.59 1.42 Fine, programmable 1.26 1.12 1.00 ADS61x9/x8 has an internal offset correction algorithm that estimates and corrects the dc offset up to 10mV. The correction can be enabled using the serial register bit ENABLE OFFSET CORR Once enabled, the algorithm estimates the channel offset and applies the correction every clock cycle. The time constant of the correction loop is a function of the sampling clock frequency. The time constant can be controlled using register bits OFFSET CORR TIME CONSTANT as described in Table After the offset is estimated, the correction can be locked in by setting OFFSET CORR TIME CONSTANT Once locked, the last estimated value is used for offset correction every clock cycle. Note that offset correction is disabled by default after reset. Figure 105 shows the time response of the offset correction algorithm, after it is enabled. Table 10. Time Constant of Offset Correction Algorithm Time constant (TCCLK), number of clock OFFSET CORR TIME CONSTANT D3-D0 Time constant, sec (=TCCLK x 1/Fs) (1) cycles 0000 256 k ms 0001 512 k ms 0010 M ms 0011 M ms 0100 M ms 0101 M ms 0110 M ms 0111 M 134 ms 1000 M 268 ms 1001 128 M 536 ms 1010 256 M 1.1 s 1011 512 M 2.2 s 1100 RESERVED 1101 RESERVED 1110 RESERVED 1111 RESERVED Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

t − Time − µs 8148 8152 8156 8160 8164 8168 8172 8176 8180 8184 8188 8192 8196 8200 8204 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 Code − LSB G080 Offset Correction DisabledOffset Correction Enabled Output Data With

36 LSB Offset

www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure 105. Output Code Time Response With Offset Correction Enabled ADS614X/2X has three power down modes power down global, standby and output buffer disable. In this mode, the entire chip including the A/D converter, internal reference and the output buffers are powered down resulting in reduced total power dissipation of about mW. The output buffers are in high impedance state. The wake-up time from global power down to data becoming valid in normal mode is typically µ This can be controlled using register bit PDN GLOBAL or using SDATA pin (in parallel configuration mode). Here, only the A/D converter is powered down and internal references are active, resulting in fast wake-up time of 300 ns. The total power dissipation in standby is about 120 mW. This can be controlled using register bit STANDBY The output buffers can be disabled and put in high impedance state wakeup time from this mode is fast, about ns. This can be controlled using register bit PDN OBUF In addition to the above, the converter enters a low-power mode when the input clock frequency falls below MSPS. The power dissipation is about 120 mW. During power-up, the AVDD and DRVDD supplies can come up in any sequence. The two supplies are separated in the device. Externally, they can be driven from separate supplies or from a single supply. ADS614X/2X provides 14-bit/12-bit data and an output clock synchronized with the data. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

D0_D1_P D0_D1_M D2_D3_P D2_D3_M D4_D5_P D4_D5_M D6_D7_P D6_D7_M D8_D9_P D8_D9_M D10_D11_P D10_D11_M Output□Clock Data□bits□D0, D1 Data□bits□D2, D3 Data□bits□D4, D5 Data□bits□D6, D7 Data□bits□D8, D9 Data□bits□D10, D11 ADS612X Pins 12□bit ADC□data LVDS□Buf fers CLKOUTP CLKOUTM D0_D1_P D0_D1_M D2_D3_P D2_D3_M D4_D5_P D4_D5_M D6_D7_P D6_D7_M D8_D9_P D8_D9_M D10_D11_P D10_D11_M Output□Clock Data□bits□D0, D1 Data□bits□D2, D3 Data□bits□D4, D5 Data□bits□D6, D7 Data□bits□D8, D9 Data□bits□D10,D11 ADS 614X Pins D12_D13_P D12_D13_M Data□bits□D12,D13 14□bit ADC□data LVDS□Buffers ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Two output interface options are available Double Data Rate (DDR) LVDS and parallel CMOS. They can be selected using the serial interface register bit ODI or using DFS pin in parallel configuration mode. In this mode, the data bits and clock are output using LVDS (Low Voltage Differential Signal) levels. Two data bits are multiplexed and output on each LVDS differential pair. Figure 106. 14-Bit ADC LVDS Outputs Figure 107. 12-Bit ADC LVDS Outputs Even data bits D0, D2, are output at the falling edge of CLKOUTP and the odd data bits D1, D3, are output at the rising edge of CLKOUTP. Both the rising and falling edges of CLKOUTP have to be used to capture all of the data bits (see Figure 108 Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

D0_D1_P, D0_D1_M D2_D3_P, D2_D3_M D4_D5_P, D4_D5_M D6_D7_P, D6_D7_M D8_D9_P, D8_D9_M D10_D11_P, D10_D11_M D12_D13_P, D12_D13_M D10 D12 Sample□N+1Sample□N D10 D12 D11 D13 D11 D13 CLKOUTM LVDS Buffer ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure 108. DDR LVDS Interface The equivalent circuit of each LVDS output buffer is shown in Figure 109 The buffer is designed to present an output impedance of 100 Ω (Rout). The differential outputs can be terminated at the receive end by a 100 Ω termination. The buffer output impedance behaves like a source-side series termination. By absorbing reflections from the receiver end, it helps to improve signal integrity. Note that this internal termination cannot be disabled and its value cannot be changed. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

h Low Low ADS6149/48/29/28 Rout –0.35□V1.2□V 0.35□V External 100- Load/c87 Switch□impedance□is nominally□50 ( 10%)/c87 /c177 When□the□High□switches□are□closed,□OUTP =□1.375□V,□OUTM□=□1.025□V When□the□Low□switches□are□closed,□OUTP =□1.025□V,□OUTM□=□1.375□V When□the□High□(or□Low)□switches□are□closed,□Rout□=□100 /c87 S0374-01 Parallel CMOS Interface ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Figure 109. LVDS Buffer Equivalent Circuit In the CMOS mode, each data bit is output on separate pin as CMOS voltage level, every clock cycle. The rising edge of the output clock CLKOUT can be used to latch data in the receiver (for sampling frequencies up to 150 MSPS) Up to 150 MSPS, the setup and hold timings of the output data with respect to CLKOUT are specified. It is recommended to minimize the load capacitance seen by data and clock output pins by using short traces to the receiver. Also, match the output data and clock traces to minimize the skew between them. For sampling frequencies 150 MSPS it is recommended to use an external clock to capture data. The delay from input clock to output data and the data valid times are specified for the higher sampling frequencies. These timings can be used to delay the input clock appropriately and use it to capture the data (see Figure Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

14-Bit ADC□Data CMOS Output□Buffers CLKOUT OVR_SDOUT Output Buffer Strength Programmability CMOS Interface Power Dissipation Output Data Format ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Figure 110. CMOS Output Interface Switching noise (caused by CMOS output data transitions) can couple into the analog inputs during the instant of sampling and degrade the SNR. The coupling and SNR degradation increases as the output buffer drive is made stronger. To minimize this, the CMOS output buffers are designed with controlled drive strength to get best SNR. The default drive strength also ensures wide data stable window for load capacitances up to pF. With CMOS outputs, the DRVDD current scales with the sampling frequency and the load capacitance on every output pin. The maximum DRVDD current occurs when each output bit toggles between and every clock cycle. In an actual application, the DRVDD current would be determined by the average number of output bits switching, which is a function of the sampling frequency and the nature of the analog input signal. Digital current due to CMOS output switching C L DRVDD F AVG where C L load capacitance, N x F AVG average number of output bits switching. Figure shows the current across sampling frequencies at MHz analog input frequency. Two output data formats are supported complement and offset binary. They can be selected using the serial interface register bit DATA FORMAT or controlling the DFS pin in parallel configuration mode. In the event of an input voltage overdrive, the digital outputs go to the appropriate full scale level. For a positive overdrive, the output code is 0x3FFF in offset binary output format, and 0x1FFF in complement output format. For a negative input overdrive, the output code is 0x0000 in offset binary output format and 0x2000 in complement output format. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

www.ti.com A single ground plane is sufficient to give good performance, provided the analog, digital, and clock sections of the board are cleanly partitioned. See the EVM User Guide SLWU061 for details on layout and grounding. As the ADS61x9/x8 already includes internal decoupling, minimal external decoupling can be used without loss in performance. Note that decoupling capacitors can help filter external power supply noise, so the optimum number of capacitors would depend on the actual application. The decoupling capacitors should be placed close to the converter supply pins. In addition to providing a path for heat dissipation, the pad is also electrically connected to digital ground internally. So, it is necessary to solder the exposed pad to the ground plane for best thermal and electrical performance. For detailed information, see the application notes for QFN Layout Guidelines SLOA122 and QFN/SON PCB Attachment SLUA271 Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

N PSNR = 10Log P (3) 10 S N D PSINAD = 10Log P + P (4) ADS6149/ADS6129 ADS6148/ADS6128 www.ti.com SLWS211B JULY 2008 REVISED OCTOBER 2008 Analog Bandwidth The analog input frequency at which the power of the fundamental is reduced by dB with respect to the low frequency value. Aperture Delay The delay in time between the rising edge of the input sampling clock and the actual time at which the sampling occurs. This delay will be different across channels. The maximum variation is specified as aperture delay variation (channel-channel). Aperture Uncertainty (Jitter) The sample-to-sample variation in aperture delay. Clock Pulse Width/Duty Cycle The duty cycle of a clock signal is the ratio of the time the clock signal remains at a logic high (clock pulse width) to the period of the clock signal. Duty cycle is typically expressed as a percentage. A perfect differential sine-wave clock results in a 50% duty cycle. Maximum Conversion Rate The maximum sampling rate at which certified operation is given. All parametric testing is performed at this sampling rate unless otherwise noted. Minimum Conversion Rate The minimum sampling rate at which the ADC functions. Differential Nonlinearity (DNL) An ideal ADC exhibits code transitions at analog input values spaced exactly LSB apart. The DNL is the deviation of any single step from this ideal value, measured in units of LSBs. Integral Nonlinearity (INL) The INL is the deviation of the ADC's transfer function from a best fit line determined by a least squares curve fit of that transfer function, measured in units of LSBs. Gain Error Gain error is the deviation of the ADC's actual input full-scale range from its ideal value. The gain error is given as a percentage of the ideal input full-scale range. Gain error has two components: error due to reference inaccuracy and error due to the channel. Both these errors are specified independently as E GREF and E GCHAN To a first order approximation, the total gain error will be E TOTAL E GREF E GCHAN For example, if E TOTAL 0.5%, the full-scale input varies from (1-0.5/100) x FS ideal to 0.5/100) x FS ideal Offset Error The offset error is the difference, given in number of LSBs, between the ADC's actual average idle channel output code and the ideal average idle channel output code. This quantity is often mapped into mV. Temperature Drift The temperature drift coefficient (with respect to gain error and offset error) specifies the change per degree Celsius of the parameter from T MIN to T MAX It is calculated by dividing the maximum deviation of the parameter across the T MIN to T MAX range by the difference T MAX T MIN Signal-to-Noise Ratio SNR is the ratio of the power of the fundamental (PS) to the noise floor power (PN), excluding the power at DC and the first nine harmonics. SNR is either given in units of dBc (dB to carrier) when the absolute power of the fundamental is used as the reference, or dBFS (dB to full scale) when the power of the fundamental is extrapolated to the converter s full-scale range. Signal-to-Noise and Distortion (SINAD) SINAD is the ratio of the power of the fundamental S to the power of all the other spectral components including noise N and distortion D but excluding dc. SINAD is either given in units of dBc (dB to carrier) when the absolute power of the fundamental is used as the reference, or dBFS (dB to full scale) when the power of the fundamental is extrapolated to the converter's full-scale range. Effective Number of Bits (ENOB) The ENOB is a measure of the converter performance as compared to the theoretical limit based on quantization noise. Copyright 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

SINAD 1.76ENOB = 6.02 /c45 (5) 10 S N PTHD = 10Log P (6) (Expressed□in□dBc)/c68VSUP /c68VOUT10PSRR□□=□20Log (7) (Expressed□in□dBc)/c68VCM /c68VOUT10CMRR□□=□20Log (8) ADS6149/ADS6129 ADS6148/ADS6128 SLWS211B JULY 2008 REVISED OCTOBER 2008 www.ti.com Total Harmonic Distortion (THD) THD is the ratio of the power of the fundamental S to the power of the first nine harmonics (PD). THD is typically given in units of dBc (dB to carrier). Spurious-Free Dynamic Range (SFDR) The ratio of the power of the fundamental to the highest other spectral component (either spur or harmonic). SFDR is typically given in units of dBc (dB to carrier). Two-Tone Intermodulation Distortion IMD3 is the ratio of the power of the fundamental (at frequencies and f2) to the power of the worst spectral component at either frequency 2f1 or 2f2 f1. IMD3 is either given in units of dBc (dB to carrier) when the absolute power of the fundamental is used as the reference, or dBFS (dB to full scale) when the power of the fundamental is extrapolated to the converter s full-scale range. DC Power Supply Rejection Ratio (DC PSRR) The DC PSSR is the ratio of the change in offset error to a change in analog supply voltage. The DC PSRR is typically given in units of mV/V. AC Power Supply Rejection Ratio (AC PSRR) AC PSRR is the measure of rejection of variations in the supply voltage by the ADC. If Δ V SUP is the change in supply voltage and Δ Vout is the resultant change of the ADC output code (referred to the input), then Voltage Overload Recovery The number of clock cycles taken to recover to less than error after an overload on the analog inputs. This is tested by separately applying a sine wave signal with 6dB positive and negative overload. The deviation of the first few samples after the overload (from their expected values) is noted. Common Mode Rejection Ratio (CMRR) CMRR is the measure of rejection of variation in the analog input common-mode by the ADC. If Δ Vcm_in is the change in the common-mode voltage of the input pins and Δ V OUT is the resultant change of the ADC output code (referred to the input), then Cross-Talk (only for multi-channel ADC) This is a measure of the internal coupling of a signal from adjacent channel into the channel of interest. It is specified separately for coupling from the immediate neighboring channel (near-channel) and for coupling from channel across the package (far-channel). It is usually measured by applying a full-scale signal in the adjacent channel. Cross-talk is the ratio of the power of the coupling signal (as measured at the output of the channel of interest) to the power of the signal applied at the adjacent channel input. It is typically expressed in dBc. Submit Documentation Feedback Copyright 2008, Texas Instruments Incorporated Product Folder Link(s): ADS6149/ADS6129 ADS6148/ADS6128

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) ADS6128IRGZR ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6128IRGZRG4 ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6128IRGZT ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6128IRGZTG4 ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6129IRGZR ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6129IRGZRG4 ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6129IRGZT ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6129IRGZTG4 ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6148IRGZR ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6148IRGZRG4 ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6148IRGZT ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6148IRGZTG4 ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6149IRGZR ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6149IRGZRG4 ACTIVE QFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6149IRGZT ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR ADS6149IRGZTG4 ACTIVE QFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) PACKAGE OPTION ADDENDUM www.ti.com 17-Nov-2008 Addendum-Page 1

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 17-Nov-2008 Addendum-Page 2

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 17-Nov-2008 Pack Materials-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) ADS6128IRGZR QFN RGZ 48 2500 333.2 345.9 28.6 ADS6128IRGZT QFN RGZ 48 250 333.2 345.9 28.6 ADS6129IRGZR QFN RGZ 48 2500 333.2 345.9 28.6 ADS6129IRGZT QFN RGZ 48 250 333.2 345.9 28.6 ADS6148IRGZR QFN RGZ 48 2500 333.2 345.9 28.6 ADS6148IRGZT QFN RGZ 48 250 333.2 345.9 28.6 ADS6149IRGZR QFN RGZ 48 2500 333.2 345.9 28.6 ADS6149IRGZT QFN RGZ 48 250 333.2 345.9 28.6 PACKAGE MATERIALS INFORMATION www.ti.com 17-Nov-2008 Pack Materials-Page 2

(TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for design. Customers are responsible for their products and components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Clocks and Timers www.ti.com/clocks Digital Control www.ti.com/digitalcontrol Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony RF/IF and ZigBee Solutions www.ti.com/lprf Video Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2008, Texas Instruments Incorporated