ADRF5010 (Rev.0)
Document overview
- Manufacturer or author: Analog Devices, Inc.
- PDF pages: 12
Technical content
Silicon SPST Switch, Nonreflective, 100 MHz to 55 GHz Rev. 0 DOCUMENT FEEDBACK TECHNICAL SUPPORT Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
FEATURES
►Ultra-wideband frequency range: 0.1 GHz to 55 GHz ►Nonreflective ports, high-power terminated path ►Symmetrical ports ►Low insertion loss ►1.0 dB typical to 20 GHz ►1.5 dB typical to 40 GHz ►2.0 dB typical to 55 GHz ►Isolation ►30 dB typical to 50 GHz ►28 dB typical to 55 GHz ►High input linearity ►P0.1dB: >33 dBm typical ►Input IP3 >60 dBm typical ►High power handling TCASE= 85 °C ►Through path ►Peak: 36 dBm ►Pulse: 33 dBm ►CW: 30 dBm ►Terminated path ►Peak: 33 dBm ►Pulse 33 dBm ►CW: 30 dBm ►Hot switching ►Peak: 33 dBm ►Pulse: 33 dBm ►CW: 30 dBm ►Complementary metal-oxide semiconductor (CMOS)-/low voltage transistor-transistor logic (LVTTL)-compatible controls ►Radio frequency (RF) switching time: 30 ns ►RF settling time (0.1 dB final RF output): 50 ns ►Dual-supply operation: ±3.3 V ►14-lead, 2.25 mm x 2.25 mm, LGA package
APPLICATIONS
►Test and instrumentation ►Cellular infrastructure: 5G mmWave ►Military radios, radars, electronic countermeasures ►Microwave radios and very small aperture terminals ►Industrial scanners FUNCTIONAL BLOCK DIAGRAM Figure 1. Functional Block Diagram switch manufactured in the silicon process. through path and 30 dBm for hot switching. employs CMOS- and LVTTL-compatible controls. handling performance is derated. See Table 2 for more details. array (LGA) package and can operate from -40°C to +105°C.
analog.com Rev. 0 | 2 of 12 Input Power Compression and Third-Order Recommendatıons For Printed Circuit
REVISION HISTORY
9/2024—Revision 0: Initial Version
VDD = 3.3 V, VSS = −3.3 V, VCTRL = 0 V or VDD, TCASE = 25°C, 50 Ω system, unless otherwise noted. RFx refers to RF1 or RF2. Table 1. Electrical Specifications
20 GHz to 40 GHz 30 dB
40 GHz to 55 GHz 28 dB
20 GHz to 40 GHz 19 dB
40 GHz to 55 GHz 21 dB
Table 1. Electrical Specifications (Continued) 1 For input linearity performance over frequency, see Figure 12 to Figure 15. 2 For power derating over frequency, see Figure 2. 3 Peak: ( ≤100 ns pulse duration, 5% duty cycle). 4 Pulse: (>100 ns pulse duration, 15% duty cycle). Table 2. Single-Supply Operation Specifications
For recommended operating conditions, see Table 1. Table 3. Absolute Maximum Ratings 1 Overvoltages at the digital control input are clamped by internal diodes. Current must be limited to the maximum rating given. 2 For power derating over frequency, see Figure 2.
3 For 105°C operation, the power handling degrades from the TCASE = 85°C
specification by 3 dB for dual supply. ing conditions for extended periods may affect product reliability. Only one absolute maximum rating can be applied at a time. Table 4. Thermal Resistance Figure 2. Power Derating vs. Frequency, Low Frequency Detail, TCASE = 85°C
sitive devices in an ESD protected area only. Human body model (HBM) per ANSI/ESDA/JEDEC JS-001. Table 5. ADRF5010, 14-Terminal LGA damage may occur on devices subjected to high energy ESD. performance degradation or loss of functionality.
in the isolation state. For the control voltage truth table, see Table 7. loss and return loss performances at high frequencies. and RF2 ports which are 50 Ω terminated. VDD pin and a negative supply voltage applied to the VSS pin.
- Power up VDD and VSS. Power up VSS after VDD to avoid
current transients on VDD during ramp-up.
- Power up the digital control inputs. The relative order of the log-
bias and damage the internal ESD protection structures.
- Apply signals to the RF input ports.
Table 7. Control Voltage Truth Table
registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887-2356, U.S.A.
0.53 REF
0.35 REF
Figure 21. 14-Terminal Land Grid Array (LGA)