ADPL44001 AD | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 17
Technical content
4V to 40V, 100mA, Ultra-Low Quiescent Current, Linear Regulator 19-101923; Rev. 0; 9/24 DOCUMENT FEEDBACK TECHNICAL SUPPORT GENERAL DESCRIPTION The ADPL44001 ultra -low quiescent current, high - voltage linear regulator is ideal for use in industrial and battery-operated systems. The device operates from a 4V to 40V input voltage, delivers up to 100mA of load current, and consumes only 8μA of quiescent current at no load. The device consumes only 0.9μA current when in shutdown. Output voltage is adjustable in the 0.6V to 38V voltage range. Feedback voltage accuracy is ±2% over temperature. An open-drain PGOOD pin provides a power-good signal to the system, achieving successful regulation of the output voltage. The device also incorporates an enable pin (EN) that allows the user to turn the part on or off. The device has a thermal shutdown fe ature that shuts down the part when the die temperature exceeds 165°C. The ADPL44001 operates over the -40°C to +125°C industrial temperature range and is available in a 6-lead, compact TSOT and a 6 -pin (3mm x 3mm) TDFN packages.
APPLICATIONS
Medical and Healthcare Battery-Powered Equipment Post Regulator for Switching Power Supplies Home and Building Automation Appliances and White Goods BENEFITS AND FEATURES Easy to Use Only 4 External Components Required Stable with Tiny 4.7μF, 0805 Output Capacitor All Ceramic Capacitors, Compact Layout Reduces Number of Linear Regulators to Stock Wide 4V to 40V Input Voltage Range Adjustable 0.6V to 38V Output Up to 100mA Load Current Capability Operates Reliably in Adverse Industrial Environments Built-In Output Voltage Monitoring with PGOOD Pin High-Voltage ENABLE Input Low 8μA Quiescent Current Low Dropout Voltage of 560mV at 100mA Overload Protection Overtemperature Protection Wide -40°C to +125°C Ambient Operating Temperature Range / -40°C to +150°C Junction Temperature Range Ordering Information appears at end of data sheet. TYPICAL APPLICATION CIRCUIT ADPL44001 IN EN GND OUT PGOOD FB VIN 6.1V TO 40V VOUT 432k 59k COUT 4.7µFCIN 0.1µF
Table 1. Electrical Characteristics (VIN = VEN = 12V, VFB = VOUT, PGOOD = OPEN, GND = 0V, COUT = 4.7µF, TA = -40°C to +125°C, unless otherwise noted. temperature range are guaranteed by design and characterization.
Table 2. Absolute Maximum Ratings 1 Junction temperature greater than +125°C degrades operating lifetimes. extended periods may affect product reliability.
Table 3. Pin Descriptions on. Pull EN to GND to place the device in a low-power shutdown mode. 2 3 GND Ground. Connect GND to the ground plane. capacitor close to the IN and GND pins. 4 6 OUT Regulator Output. Connect at least 4.7µF, 0805 capacitor from OUT to GND. above 92% of its set value. The PGOOD pin can be left floating if not used. GND to adjust the output voltage from 0.6V to 38V. EP to a large GND plane with several thermal vias for best thermal performance. method for EP connection and thermal vias.
analog.com Rev. 0 5 of 17 TYPICAL PERFORMANCE CHARACTERISTICS (VIN = VEN = 7V, VOUT = 5V, COUT = 4.7µF TA= +25°C, unless otherwise noted.) toc01 toc02 μ toc03 toc04 toc05 toc06 toc07 toc08 toc09
analog.com Rev. 0 6 of 17 toc10 toc11 toc12 toc13 toc14 PSRR (dB) toc15
Figure 1. Block Diagram consumes only 8μA of quiescen t current at no load. The device consumes only 0.9μA current when in shutdown. Output voltage is adjustable from 0.6V to 38V voltage range. Feedback voltage accuracy is ±2% over temperature. TSOT and a 6-pin (3mm x 3mm) TDFN packages. by high input-level voltages, or be connected to IN for always-on operation.
device to cool. The thermal sensor turns the pass transistor on again after the junction temperature cools by 15°C. ADPL44001 in the event of fault conditions. automatically restarts once the die temperature cools by 15°C. Figure 2. Setting the Output Voltage where VIN is the input voltage, VOUT is the output voltage, and ILOAD is the load current. For a multilayer board, the thermal performance metrics for the packages are given in Table 4.
Table 4. Thermal Resistance
6 TSOT 110 50 °C/W
6 TDFN 42 9 °C/W
Figure 3. Application Circuit for 5V Output
Figure 4. 6 TSOT Package Outline
Figure 5. 6 TSOT Land Pattern
Figure 6. 6 TDFN Package Outline
Figure 7. 6 TDFN Land Pattern
analog.com Rev. 0 15 of 17
ORDERING INFORMATION
Table 5. Ordering Guide +Denotes a lead(Pb)-free/RoHS-compliant package.
analog.com Rev. 0 16 of 17
REVISION HISTORY
0 09/24 Initial release —
ALL INFORMATION CONTAINED HEREIN IS PROVIDED “AS IS” WITHOUT REPRESENTATION OR WARRANTY. NO RESPONSIBILITY IS ASSUMED BY ANALOG DEVICES FOR ITS USE, NOR FOR ANY INFRINGEMENTS OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES THAT MAY RESULT FROM ITS USE. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. NO LICENCE, EITHER EXPRESSED OR IMPLIED, IS GRANTED UNDER ANY ADI PATENT RI GHT, COPYRIGHT, MASK WORK RIGHT, OR ANY OTHER ADI INTELLECTUAL PROPERTY RIGHT RELATING TO ANY COMBINATION, MACHINE, OR PROCESS WHICH ADI PRODUCTS OR SERVICES ARE USED. TRADEMARKS AND REGISTERED TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. ALL ANALOG DEVICES PRODUCTS CONTAINED HEREIN ARE SUBJECT TO RELEASE AND AVAILABILITY. analog.com Rev. 0 17 of 17