ADP05C24A

ADP MORNSUN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. ADP A/3-2012 Page 1 of 2 ADP Series Special for LCD Power supply WIDE INPUT, NON-ISOLATED & REGULATED SINGLE POSITIVE OR NEGATIVE OUTPUT multi-country patent protection RoHS FEATURES PRODUCT PROGRAM Input Voltage(VDC) Part Number Range Nominal ON/OFF Function Output Voltage Characteristic ADP05C24 No Negative Voltage output non-adjustable ADP05C24A Yes Negative Voltage output adjustable ADP0524A Yes Positive Voltage output adjustable ADP0528A 5.0-12 5.0 Yes Positive Voltage output adjustable ON/OFF Function: Refer to recommended circuit. OUTPUT SPECIFICATIONS Item Part Number Test Conditions Min Max Units ADP05C24 Vin=5.0-12V, RL=2K Refer to recommended circuit -25 -23 ADP05C24A -25 -6.5* ADP0524A 6 * 25 Output Voltage （Vout） ADP0528A Vin=5V, Radj=0-20kΩ, ON/OFF connect to GND, Refer to recommended circuit 6 * 30 V ADP05C24 Vin=5.0-12V, RL =2K,Cout=100μF Refer to recommended circuit 200 ADP05C24A 200 ADP0524A 200 Ripple& Noise ADP0528A Vin=5-12VDC, RL =2K, Radj =0-20kΩ ON/OFF connect to GND, Cout=100μF Refer to recommended circuit 450 mVp-p ADP05C24 61 ADP05C24A 60 ADP0524A 61 Efficiency (η) ADP0528A Vin=5V, RL =2K, Radj =0Ω, ON/OFF connect to GND, Refer to recommended circuit Note: *When Vin change at 5.0-12V, adjustable IVoutI (min) will change between 6-12V; COMMON SPECIFICATION Item Test Conditions Min Typ Max Units Storage Humidity 95 % Storage Temperature -40 125 Operating Temp. Power derating (above 60°C) -20 71 Temp. rise at full load 15 Lead Temperature 1.5mm from case for 10 seconds 300 o C Cooling Free air convection Case material Plastic (UL94-V0) MTBF 25℃（MIL-HDBK-217F） 1000 K hours Weight 4.0 g l Apply to LCD display l Small footprint, thickness less than 7mm l Wide input 5 to 12VDC l Industry standard pinout l Free air convection l No heat sink required l Output voltage adjustable l Remote ON/OFF

APPLICATIONS

ADP series are specially designed for LCD display, these produces have wide output voltage adjustable range, and function of remote ON/OFF, free air convection, and No heat sink required while use. MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Note: 1. All specifications measured at T A=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified; 2.The nominal value is -24V, 24V or 28V.

The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. ADP A/3-2012 Page 2 of 2 TYPICAL CHARECTERISTICS Operating Temp.( ) C Temperature Derating Graph 60 80 OUTLINE DIMENSIONS & FOOTPRINT DETAILS MECHANICAL DIMMENSIONS RECOMMENDED FOOTPRINT TUBE OUTLINE DIMMENSIONS Note Unitmminch General tolerances:inch :[] 0.25 0.010 ] Pinsectiontolerances± mm ± inch ± mm ± :0.10[0.004] Note: Unitmminch Generaltolerances :[] :0.50mm[0.020inch]±± LmminchDevicespertubequantitypcs Lmminchpcs =530[20.866] : =220[8.661] Devicespertubequantity5 Shorttubeinnerpackagingdimensionsmm Shorttubeouterpackagingdimensionswithsixinnerpackaging): mm Longtubeinnerpackagingdimensionsmm mm mm :255*170*80 ； 375*280*270 ； :580*200*100 ； 600*215*220 ； 600*215*325 。 Longtubeouterpackagingdimensions(with two inner packagin g ): Longtubeouterpackagingdimensions(with three inner packagin g ): 6.95 [0.274] 37.90 [1.492] 27.94 [1.100] 1.50 [0.059] 9.50 0.50 [0.020] 0.30 [0.012] 0.50 [0.020] Φ1.00 [0.039] 22.86 [0.900] 17.78 [0.700] 12.70 [0.500] 12345 9101112 12345 9101112 Notegrid 2.54*2.54mm : . 9.60 [0.378] 12.40 [0.488] 16.90 [0.665] 4.90 [0.193] Pin FOOTPRINT DETAILS ADP05C24 ADP_A series NC Vin GND NC NC NC NC NC Vout NC Vin GND ON/OFF ADJ NC NC NC Vout Discription No connection Input Common groud Control Output adjust Output No connection No connection No connection (Front View) (Bottom View) RECOMMENDED CIRCUIT LCD DC/DC CONVERTER Vin:512VDC Vout:XXXVDC～CNYYWW ADP05XXXXAMORNSUN RL Vin GND Vout Cin ＋ Cout RL Vin GND Vout Cin Cout LCD DC/DC CONVERTER Vin:512VDC Vout:XXXVDC～CNYYWW ADP05C24MORNSUN W 20K Note: 1. When use the convertor, filter capacitors should be connected to the input and output end, to reduce ripple and noise. 2. Output voltage adjustor “W” is recommended to use 20K Ω, when “W”=0Ω, IVoutI=max; “W”=20KΩ, IVoutI=min. 3. ON/OFF function: when switch close, natural output; when switch open, output shutdown. 4. ADJ pin is not allowed to open, or it may cause damage to the device.