ADLVIS-1660 ADL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

ADLVIS-1660 2-CH CoaXPress Rugged SFF Vision Board Solution ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345 T: 858.490.0597 F: 858.490.0599 sales@adl-usa.com www.adl-usa.com ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany sales@adl-europe.com www.adl-europe.com *Data subject to change without notice.

APPLICATIONS

  • Hyperspectral Imaging
  • Traffic Surveillance
  • Security Monitoring and Control
  • Unmanned Systems - High-Resolution Image/Video Capture
  • High-Speed Automated Optical Inspection
  • Very High-Resolution Line-Scan Image Acquisition
  • Military and Defense ISR
  • High Frame-Rate Motion Analysis and Recording

FEATURES

  • Dual CoaXPress CXP-6 Ports
  • Quad Intel Core i7-4700EQ, 8GB DDR3
  • Rugged, Small Form Factor PCIe/104 Design (96mm x 115mm)
  • 1,250 MB/s Camera Bandwidth
  • 2x CXP-6 DIN 1.0/2.3 Female Connectors
  • PoCXP Safe Power: 17W from Regulated 24VDC Output Per Port
  • Breakout 26-pin D-sub CXP System I/O with 12V Out
  • GENICAM Compliant
  • Euresys Memento Event Logging Tool
  • Expandable to 2x Dual-Port CXP-6 Modules
  • LEDs: A/B Status, FPGA Status, Board Status
  • C2C Link for Card to Card Link
  • -20C to +70C Operation; Optional -40C to +85C
  • BOM Includes: CPU, 1x CoaXPress Module, 2x DIN cables The ADLVIS-1660 Dual CXP-6 is a rugged, small form factor (SFF) CoaXPress solution intended for military and industrial applications. It’s a two-board PCIe/104 solution featuring a Quad Intel i7-4700EQ processor with a dual CXP-6 module using the x16 PCIe/104 bus resulting is a stunning 1,250 MB/s effective camera bandwidth. The ADLVIS-1660 features include small outline coaxial cabling for DIN1.0/2.3 connectors optimized for SFF design. It supports PoCXP, is GENICAM compliant and includes Euresys Memento event logging for efficient application software development. A second CXP-6 module can easily be added to support four 1xCXP-6 cameras or two 2xCXP-6 cameras. The ADLVIS-1660 targets rugged, Small Form Factor high-performance vision solutions in a host of military and industrial environments. It enables very high-definition applications as well as high-framerate applications in less than ideal environments for security and surveillance, traffic management, science, machine vision and a vast range of next-generation vision products.

DESCRIPTION

ADLVIS-1660 2-CH CoaXPress Rugged SFF Vision Board Solution ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345 T: 858.490.0597 F: 858.490.0599 sales@adl-usa.com www.adl-usa.com ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany sales@adl-europe.com www.adl-europe.com TECHNICAL SPECIFICATIONS - ADLVIS-1660 FEATURE FUNCTION REMARKS Interface Features Connectors • 2x CXP-6 DIN 1.0/2.3 female connectors

  • System I/O: 26p D-sub connector
  • Camera Power Input: 4p 0.1 in Molex KK 7478 male
  • C2C Link: 2x3 6p 0.1 in header Lamp Indicators • ‘A’ ‘B’ HOST LEDS: 2x bi-color red/green
  • FPGA Status LED: bi-color red/green
  • Board Status LED: bi-color red/green Interface Standards • CoaXPress 1.0 and 1.1 Aggregated Camera Data Transfer Rate • 12.5 Gbits/s (1250MB/s) Maximum
  • Power Over CoaXPress PoCXP Safe Power • 17W of 24VDC regulated power per CoaXPress port
  • PoCXP device detection and automatic power-on
  • Overload and short-circuit protections 24V Power Input • Connects to Auxiliar Power input on CoaXpress module
  • Camera Support Types • Area-Scan Cameras:
  • Gray-scale and color (RGB and Bayer CFA)
  • Single-tap (1x-1Y) progressive scan Pixel Formats Supported • Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
  • Raw
  • Mono8, Mono10, Mono12, Mono14, Mono16
  • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX=GR, RG, GB, or BG
  • RGB8, RGB10, RGB12, RGB14, RGBA16 Area Scan Camera Control • External hardware trigger with optional delay and trigger decimation
  • Accurate control of strobe position with support for early/late strobe pulses GPIO (General Purpose Input/Output

10 I/O Lines • 2x differential inputs (DIN)

  • 2x single-ended TTL I/O (TTLIO)
  • 4x Isolated Inputs (IIN)
  • 2x Isolated Outputs (IOUT) Usage • Any I/O input line can be used by any LIN tool of the I/O Toolbox
  • I/O input lines can be used by any QDC tool in I/O toolbox to decode A/B signals of a motion encoder
  • LIN and QDC tool outputs can be further processed by other tools (DIV, MDV, DEL) to generate trigger events such as: cycle trigger, cycle sequence trigger, start-of-scan trigger and end-of-scan trigger. *Data subject to change without notice.

ADLCXP-1660 2-CH CoaXPress Rugged SFF Vision Board Solution ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345 T: 858.490.0597 F: 858.490.0599 sales@adl-usa.com www.adl-usa.com ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany sales@adl-europe.com www.adl-europe.com TECHNICAL SPECIFICATIONS - ADLCXP-1660 (CONTINUED) FEATURE FUNCTION REMARKS I/O Toolbox I/O Toolbox Configuration Tools • Line Input tool (LIN): Edge detector for rising/falling edges of any selected input line

  • Quadrature Decoder tool (QDC): Selected transitions, Backward motion compenasator, 32-bit up/down counter
  • Divider tool: (DIV): Triggeres every Nth input event from any I/O toolbox event source
  • Multiplier/Divider tool: (MDV): Generates m events every d input event from any I/O toolbox event source
  • Delay tool (DEL): Delay up to 16 events from one or two I/O toolbox event sources
  • On-Board Processing On-Board Memory • 512MB Data Stream Statistics • Measurement of:
  • Frame rate (area-scan only)
  • Line Rate
  • Data Rate
  • Configurable Averaging interval Event Signaling and Counting • EVENT_NEW_BUFFER event on newly filled buffers
  • Custom Event Sources: I/O toolbox events, Camera & Illumination control events
  • CoaXPress data stream events; CoaXPress host interface events
  • Event-specific data
  • State of all System I/O lines sampled at the event occurence *Data subject to change without notice.

ORDERING INFORMATION

ITEM CODE PART # DESCRIPTION PCIe/104 Board ADLCXP-1660 360330 ADLCXP-1600, -20C - +70C ADLCXP-1660-EX 360331 ADLCXP-1600, -40C -+85C ADLCXP-1660-2 360332 Additional 2x CXP-6 Module w cables

360333 Option System I/O Breakout Board

ADLQM87PC-CK 292770 CPU Cable Kit for ADLQM87PC ADLMES8200 Chassis CALL Integration into MIL-STD 810 ADLMES8200 enclosure Custom SFF Chassis CALL Custom design, development and system integration MES8200 Spreader Heat Spreader for MES8200 Chassis