ADLCF-II ADL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Accepts Type I and II and IDE CF modules
- Small size card (2.36”W x 2.0”L x .77”H)
- Full Range Capacity in CF to 8GB and beyond
- 44pin IDE hard drive cable compatible
- Remote mounting configuration CF Benefits
- Resistant to dirt, shock, vibration & temperature
- Low power consumption
- No acoustic noise
- Proven reliability
- Fast startup time – no spin-up
- High transfer rate Options
- Single or Dual configuration
- Media Ejector/retainer options
- Data Cable Locking option Item Code Part # Description ADLCF-II-S 989010 CF to IDE Type II single adapter, not for stack ADLCF-II-D 989020 CF to IDE Type II dual adapter, not for stack Options Option E 989110 Opt. Ejector added to ADLCF-II (one) Option LE 989120 Opt. Latching Ejector added to ADLCF-II (one) Option LH 989130 Opt. Locking IDE cable header added to ADLCF-II Option E-D 989140 Opt. Ejector added to ADLCF-II (for 2nd on dual version) Option LE-D 989150 Opt. Latching Ejector added to ADLCF-II (for 2nd on dual) An interface board developed to allow CompactFlashTM cards Type I & II or a IBM Microdrive TM to be used as storage devices on an IDE inter- face. It takes advantage of the "true IDE" mode of a CompactFlash TM Card and enable it to operate as a ID E hard disk drive. The adapter is small and designed to mount where convenient for use with embedded systems. The result is that a syst em can support removable solid state mass storage. It can also come with locking headers and latching ejec- tors. Ordering Information Description