ADG842YKSZ-500RL7

ADG841 AD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

0.28 Ω CMOS 1.65 V to 3.6 V Single SPST Switches in SC70 ADG841/ADG842 Rev. 0 Information furn ished by An alog D evices is believed to be accurate and reliab le. However, no respo nsibility is assumed by An alog D evices fo r its use, nor any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or p atent rights of Analo g Devices. Trademarks and registered trademarks are the property of their respective owners. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved.

FEATURES

0.28 Ω typical 0.48 Ω max at 125°C Excellent audio performance, ultralow distortion 0.025 Ω typical 0.052 Ω max RON flatness 1.65 V to 3.6 V single supply High current carrying capability 300 mA continuous current 500 mA peak current Automotive temperature range: –40°C to +125°C Rail-to-rail operation Typical power consumption (<0.01 µW) FUNCTIONAL BLOCK DIAGRAM SWITCHES SHOWN FOR A LOGIC 1 INPUT ADG841 S IN D 05424-001 ADG842 S IN D Figure 1.

APPLICATIONS

The ADG841 and ADG842 are low voltage CMOS devices containing a single-pole, single-throw (SPST) switch. The ADG841 is closed for a Logic 1 input and the ADG842 is open for a Logic 1 input. The devices offer ultralow on resistance of less than 0.48 Ω over the full temperature range. The ADG841/ ADG842 are fully specified for 3.3 V, 2.5 V, and 1.8 V supply operation. Each switch conducts equally well in both directions when on, and has an input signal range that extends to the supplies. The ADG841/ADG842 exhibit break-before-make switching action. The ADG841/ADG842 are available in a 6-lead SC70 package. PRODUCT HIGHLIGHTS 1. <0.48 Ω over full temperature range of –40°C to +125°C. 2. Compatible with 1.8 V CMOS logic. 3. High current handling capability (300 mA continuous current at 3.3 V). 4. Low THD + N (0.02% typ). 5. Tiny SC70 package. Table 1. ADG841/ADG842 Truth Table

0 Off On

1 On Off

Rev. 0 | Page 2 of 16 TABLE OF CONTENTS

REVISION HISTORY

4/05—Revision 0: Initial Version

Rev. 0 | Page 3 of 16 SPECIFICATIONS—2.7 V TO 3.6 V1 VDD = 2.7 V to 3.6 V , GND = 0 V , unless otherwise noted. Table 2. −40°C −40°C Parameter +25°C to +85°C to +125°C Unit Test Conditions/Comments ANALOG SWITCH Analog Signal Range 0 V to VDD V VDD = 2.7 V On Resistance (RON) 0.28 Ω typ VDD = 2.7 V, VS = 0 V to VDD, IDS = −100 mA 0.37 0.43 0.48 Ω max Figure 18 On Resistance Flatness (RFLAT (ON)) 0.025 Ω typ VDD = 2.7 V, VS = 0 V to VDD, IDS = −100 mA 0.034 0.044 0.052 Ω max LEAKAGE CURRENTS VDD = 3.6 V Channel On Leakage ID, IS (ON) ±0.2 nA typ VS = VD = 0.6 V or 3.3 V; Figure 20 DIGITAL INPUTS Input High Voltage, VINH 2 V min Input Low Voltage, VINL 0.8 V max Input Current, IINL or IINH 0.005 µA typ VIN = VINL or VINH ±0.1 µA max Digital Input Capacitance, CIN 3.2 pF typ DYNAMIC CHARACTERISTICS2 tON 10.5 ns typ RL = 50 Ω, CL = 35 pF 14 15.5 16.5 ns max VS = 1.5 V; Figure 21 tOFF 6.5 ns typ RL = 50 Ω, CL = 35 pF 7.8 8 8.2 ns max VS = 1.5 V; Figure 21 Charge Injection 200 pC typ VS = 1.5 V, RS = 0 Ω, CL = 1 nF; Figure 22 Off Isolation −54 dB typ RL = 50 Ω, CL = 5 pF, f = 100 kHz; Figure 23 Total Harmonic Distortion (THD + N) 0.012 % RL = 32 Ω, f = 20 Hz to 20 kHz, VS = 3 V p-p Insertion Loss −0.02 dB typ RL = 50 Ω, CL = 5 pF; Figure 24 −3 dB Bandwidth 21 MHz typ RL = 50 Ω, CL = 5 pF; Figure 24 CS (OFF) 160 pF typ CD (OFF) 160 pF typ CD, CS (ON) 238 pF typ POWER REQUIREMENTS VDD = 3.6 V IDD 0.003 µA typ Digital inputs = 0 V or 3.6 V 1 4 µA max

1 Temperature range is −40°C to +125°C

2 Guaranteed by design; not subject to production test.

Rev. 0 | Page 4 of 16 SPECIFICATIONS—2.5 V ± 0.2 V1 VDD = 2.5 V ± 0.2 V , GND = 0 V , unless otherwise noted. Table 3. −40°C −40°C Parameter +25°C to +85°C to +125°C Unit Test Conditions/Comments ANALOG SWITCH Analog Signal Range 0 V to VDD V On Resistance (RON) 0.3 Ω typ VDD = 2.3 V, VS = 0 V to VDD, IDS = −100 mA 0.35 0.4 0.45 Ω max Figure 18 On Resistance Flatness (RFLAT (ON)) 0.025 Ω typ VDD = 2.3 V, VS = 0 V to VDD, IDS = −100 mA 0.04 0.05 0.05 Ω max LEAKAGE CURRENTS VDD = 2.7 V Channel On Leakage ID, IS (ON) ±0.2 nA typ VS = VD = 0.6 V or 2.4 V; Figure 20 DIGITAL INPUTS Input High Voltage, VINH 1.7 V min Input Low Voltage, VINL 0.7 V max Input Current, IINL or IINH 0.005 µA typ VIN = VINL or VINH ±0.1 µA max Digital Input Capacitance, CIN 3.2 pF typ DYNAMIC CHARACTERISTICS2 tON 13 ns typ RL = 50 Ω, CL = 35 pF 16.5 18 19 ns max VS = 1.5 V; Figure 21 tOFF 7 ns typ RL = 50 Ω, CL = 35 pF 8.2 8.4 8.6 ns max VS = 1.5 V; Figure 21 Charge Injection 150 pC typ VS = 1.25 V, RS = 0 Ω, CL = 1 nF; Figure 22 Off Isolation −54 dB typ RL = 50 Ω, CL = 5 pF, f = 100 kHz; Figure 23 Total Harmonic Distortion (THD + N) 0.022 % RL = 32 Ω, f = 20 Hz to 20 kHz, VS = 1.5 V p-p Insertion Loss −0.02 dB typ RL = 50 Ω, CL = 5 pF; Figure 24 –3 dB Bandwidth 21 MHz typ RL = 50 Ω, CL = 5 pF; Figure 24 CS (OFF) 170 pF typ CD (OFF) 170 pF typ CD, CS (ON) 238 pF typ POWER REQUIREMENTS VDD = 2.7 V IDD 0.003 µA typ Digital inputs = 0 V or 2.7 V 1 4 µA max 1 Temperature range is −40°C to +125°C. 2 Guaranteed by design; not subject to production test.

Rev. 0 | Page 5 of 16 SPECIFICATIONS—1.65 V TO 1.951 VDD = 1.65 V to1.95 V , GND = 0 V , unless otherwise noted. Table 4. −40°C −40°C Parameter +25°C to +85°C to +125°C Unit Test Conditions/Comments ANALOG SWITCH Analog Signal Range 0 V to VDD V On Resistance (RON) 0.37 Ω typ VDD = 1.8 V, VS = 0 V to VDD, IDS = −100 mA 0.4 0.84 0.84 Ω max Figure 18 0.6 1.8 1.8 Ω max VDD = 1.65 V, VS = 0 V to VDD, IDS = −100 mA On Resistance Flatness (RFLAT (ON)) 0.17 Ω typ VDD = 1.65 V, VS = 0 V to VDD, IDS = −100 mA LEAKAGE CURRENTS VDD = 1.95 V Channel On Leakage ID, IS (ON) ±0.2 nA typ VS = VD = 0.6 V or 1.65 V; Figure 20 DIGITAL INPUTS Input High Voltage, VINH 0.65 VDD V min Input Low Voltage, VINL 0.35 VDD V max Input Current, IINL or IINH 0.005 µA typ VIN = VINL or VINH ±0.1 µA max Digital Input Capacitance, CIN 4 pF typ DYNAMIC CHARACTERISTICS2 tON 19 ns typ RL = 50 Ω, CL = 35 pF 26 28 30 ns max VS = 1.5 V; Figure 21 tOFF 8 ns typ RL = 50 Ω, CL = 35 pF 9.5 9.8 10 ns max VS = 1.5 V; Figure 21 Charge Injection 100 pC typ VS = 1 V, RS = 0 V, CL = 1 nF; Figure 22 Off Isolation −54 dB typ RL = 50 Ω, CL = 5 pF, f = 100 kHz; Figure 23 Total Harmonic Distortion (THD + N) 0.14 % RL = 32 Ω, f = 20 Hz to 20 kHz, VS = 1.2 V p-p Insertion Loss −0.02 dB typ RL = 50 Ω, CL = 5 pF; Figure 24 –3 dB Bandwidth 21 MHz typ RL = 50 Ω, CL = 5 pF; Figure 24 CS (OFF) 178 pF typ CD (OFF) 178 pF typ CD, CS (ON) 238 pF typ POWER REQUIREMENTS VDD = 1.95 V IDD 0.003 µA typ Digital inputs = 0 V or 1.95 V 1 4 µA max 1 Temperature range −40°C to +125°C. 2 Guaranteed by design; not subject to production test.

Rev. 0 | Page 6 of 16 ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 5. Parameter Rating VDD to GND −0.3 V to +4.6 V Analog Inputs1 −0.3 V to VDD + 0.3 V Digital Inputs1 −0.3 V to 4.6 V or 10 mA, whichever occurs first Peak Current, S or D

3.3 V Operation 500 mA

2.5 V Operation 460 mA

1.8 V Operation 420 mA (pulsed at 1 ms,

10% duty cycle max) Continuous Current, S or D

3.3 V Operation 300 mA

2.5 V Operation 275 mA

1.8 V Operation 250 mA

Operating Temperature Range Automotive (Y Version) −40°C to +125°C Storage Temperature Range −65°C to +150°C Junction Temperature 150°C θJA Thermal Impedance 494.8°C/W Reflow Soldering (Pb-free) Peak Temperature 260(+0/−5)°C Time at Peak Temperature 10 sec to 40 sec 1 Overvoltages at S or D are clamped by internal diodes. Current should be limited to the maximum ratings given. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time. ESD CAUTION ESD (electrostatic discharge) se nsitive device . Electrostatic charges as hi gh as 4000 V readily accumulate on the human body and test eq uipment and can discharge without detection. Although this product features proprietary ESD protection circ uitry, permanent dama ge may occur on devices subjected to high energy electrostatic di scharges. Ther efore, pro per ESD precautions are rec ommended to avoid performan ce degradation or loss of functionality.

Figure 2. 6-Lead SC70 Table 6. Pin Function Descriptions 1 D Drain Terminal. Can be an input or output. 2 S Source Terminal. Can be an input or output. 3 GND Ground (0 V) Reference. 6 VDD Most Positive Power Supply Potential.

Rev. 0 | Page 11 of 16 TERMINOLOGY IDD Positive supply current. VD (VS) Analog voltage on Terminals D and S. RON Ohmic resistance between D and S. RFLAT (ON) Flatness is the difference between the maximum and minimum value of on resistance as measured over the specified analog signal range. IS (OFF) Source leakage current with the switch off. ID (OFF) Drain leakage current with the switch off. ID, IS (ON) Channel leakage current with the switch on. VINL Maximum input voltage for Logic 0. VINH Minimum input voltage for Logic 1. IINL (IINH) Input current of the digital input. CS (OFF) Off switch source capacitance. Measured with reference to ground. CD (OFF) Off switch drain capacitance. Measured with reference to ground. CD, CS (ON) On switch capacitance. Measured with reference to ground. CIN Digital input capacitance. tON Delay time between the 50% and the 90% points of the digital input and switch on condition. tOFF Delay time between the 50% and the 90% points of the digital input and switch off condition. Charge Injection A measure of the glitch impulse transferred from the digital input to the analog output during on-off switching. Off Isolation A measure of unwanted signal coupling through an off switch. −3 dB Bandwidth The frequency at which the output is attenuated by 3 dB. On Response The frequency response of the on switch. Insertion Loss The loss due to the on resistance of the switch. THD + N The ratio of the harmonics amplitude plus noise of a signal to the fundamental. PSRR Power Supply Rejection Ratio. This is a measure of the coupling of unwanted ac signals on the power supply to the switch output when the supply is not decoupled.

0.65 BSC

1.30 BSC

0.10 MAX

0.10 COPLANARITY

Figure 25. 6-Lead Thin Shrink Small Outline Transistor [SC70] 1 Branding on this package is limited to three characters due to space constraints.

Rev. 0 | Page 14 of 16 NOTES

Rev. 0 | Page 15 of 16 NOTES

Rev. 0 | Page 16 of 16 NOTES © 2005 Analo g De vices, Inc. All rights reserve d. Tra demarks and registered tra demarks are the prop erty of their respective owners . D05424-0-4/05(0)