ADG508AKNZ

ADG508AKNZ AD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Rev. D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2009 Analog Devices, Inc. All rights reserved.

FEATURES

44 V supply maximum rating

VSS to VDD analog signal range Single-/dual-supply specifications Wide supply range: 10.8 V to 16.5 V Extended plastic temperature range: −40°C to +85°C Low power dissipation: 28 mW maximum Low leakage: 20 pA typical Available in 16-lead DIP/SOIC and 20-lead PLCC/LCC packages Superior alternative to DG508A, HI-508 DG509A, HI-509 FUNCTIONAL BLOCK DIAGRAMS ADG508A D A0 A1 A2 EN DECODER 00051-001 Figure 1. ADG508A Figure 2. ADG509A TTL and 5 V CMOS logic-compatible digital inputs. to VDD and enables operation over a wide range of supply voltages.

1. Single-/Dual-Supply Specifications with a Wide Tolerance.

both single and dual supplies.

1. Extended Signal Range. The enhanced LC 2MOS processing
2. Break-Before-Make Switching. Switches are guaranteed
3. Low Leakage. Leakage currents in the range of 20 pA make

these multiplexers suitable for high precision circuits.

Rev. D | Page 2 of 16 TABLE OF CONTENTS

REVISION HISTORY

7/09—Rev. C to Rev. D 3/07—Rev. B to Rev. C

Rev. D | Page 4 of 16 ADG508A/ ADG509A K Version ADG508A/ ADG509A B Version ADG508A/ ADG509A T Version Parameter +25°C −40°C to +85° +25°C −40°C to +85°C +25°C −55°C to +125°C Unit Comments CS (Off ) 5 5 5 pF typ VEN = 0.8 V CD (Off) ADG508A 22 22 22 pF typ VEN = 0.8 V ADG509A 11 11 11 pF typ QINJ, Charge Injection 4 4 4 pC typ RS = 0 Ω, VS = 0; see Figure 22 POWER SUPPLY IDD 0.6 0.6 0.6 mA typ VIN = VINL or VINH 1.5 1.5 1.5 mA max ISS 20 20 20 μA typ VIN = VINL or VINH 0.2 0.2 0.2 mA max Power Dissipation 10 10 10 mW typ 28 28 28 mW max 1 Sample tested at 25°C to ensure compliance.

Rev. D | Page 5 of 16 SINGLE SUPPLY VDD = 10.8 V to 16.5 V , VSS = GND = 0 V , unless otherwise noted. Table 2. ADG508A/ ADG509A K Version ADG508A/ ADG509A B Version ADG508A/ ADG509A T Version Parameter +25°C −40°C to +85°C +25°C −40°C to +85°C +25°C −55°C to +125°C Unit Comments ANALOG SWITCH Analog Signal Range GND GND GND GND GND GND V min V DD VDD VDD VDD VDD VDD V max RON 500 500 500 Ω typ GND ≤ VS ≤ 10 V, IDS = 0.5 mA; see Figure 14 700 1000 700 1000 700 1000 Ω max RON Drift 0.6 0.6 0.6 %/°C typ VS = 0, IDS = 0.5 mA RON Match 5 5 5 % typ GND ≤ VS ≤ 10 V, IDS = 0.5 mA IS (Off ), Off Input Leakage 0.02 0.02 0.02 nA typ V1 = 10 V/GND, V2 = GND/10 V; see Figure 15 1 50 1 50 1 50 nA max ID (Off), Off Output Leakage 0.04 0.04 0.04 nA typ V1 = 10 V/GND, V2 = GND/10 V; see Figure 16 ADG508A 1 100 1 100 1 100 nA max ADG509A 1 50 1 50 1 50 nA max ID (On), On Channel Leakage 0.04 0.04 0.04 nA typ V1 = V2 = 10 V/GND; see Figure 17 ADG508A 1 100 1 100 1 100 nA max ADG509A 1 50 1 50 1 50 nA max IDIFF, Differential Off Output Leakage (ADG509A Only) 25 25 25 nA max V1 = 10 V/GND, V2 = GND/10 V; see Figure 18 DIGITAL CONTROL VINH, Input High Voltage 2.4 2.4 2.4 V min VINL, Input Low Voltage 0.8 0.8 0.8 V max IINL or IINH 1 1 1 μA max VIN = 0 to VDD CIN Digital Input Capacitance 8 8 8 pF max DYNAMIC CHARACTERISTICS tTRANSITION1 300 300 300 ns typ V1 = 10 V/GND, V2 = GND/10 V; see Figure 19 450 600 450 600 450 600 ns max tOPEN1 50 50 50 ns typ See Figure 20 25 10 25 10 25 10 ns min tON (EN)1 250 250 250 ns typ See Figure 21 450 600 450 600 450 600 ns max tOFF (EN)1 250 250 250 ns typ See Figure 21 450 600 450 600 450 600 ns max Off Isolation 68 68 68 dB typ VEN = 0.8 V, RL = 1kΩ, CL = 15 pF , VS = 3.5 V rms, f = 100 kHz 50 50 50 dB min CS (Off ) 5 5 5 pF typ VEN = 0.8 V CD (Off) ADG508A 22 22 22 pF typ VEN = 0.8 V ADG509A 11 11 11 pF typ QINJ, Charge Injection 4 4 4 pC typ RS = 0 Ω, VS = 0 V; see Figure 22

Rev. D | Page 6 of 16 ADG508A/ ADG509A K Version ADG508A/ ADG509A B Version ADG508A/ ADG509A T Version Parameter +25°C −40°C to +85°C +25°C −40°C to +85°C +25°C −55°C to +125°C Unit Comments POWER SUPPLY IDD 0.6 0.6 0.6 mA typ VIN = VINL or VINH 1.5 1.5 1.5 mA max Power Dissipation 10 10 10 mW typ 25 25 25 mW max 1 Sample tested at 25°C to ensure compliance.

Rev. D | Page 7 of 16 ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 3. Parameter Ratings VDD to VSS 44 V VDD to GND 32 V VSS to GND –32 V Analog Inputs1 Voltage at S, D VSS − 2 V to VDD + 2 V or 20 mA, whichever occurs first Continuous Current, S or D 20 mA Pulsed Current S or D 1 ms Duration, 10% Duty Cycle 40 mA Digital Inputs1 Voltage at A, EN VSS − 4 V to VDD + 4 V or 20 mA, whichever occurs first Power Dissipation (Any Package) Up to 75°C 470 mW Derates Above 75°C by 6 mW/°C Operating Temperature Commercial (K Version) −40°C to +85°C Industrial (B Version) −40°C to +85°C Extended (T Version) −55°C to +125°C Storage Temperature Range −65°C to +150°C 1Overvoltage at A, EN, S, or D is clamped by diodes. Current should be limited to the maximum rating shown in Table 3. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION

Figure 3. ADG508A DIP, SOIC

18 GND

17 VDD

Figure 4. ADG508A LCC Figure 5. ADG508A PLCC Table 4. ADG508A Pin Function Description 2 3 EN Active High Digital Input. When low, the device is disabled and all switches are off. When high, Ax logic inputs determine on switches. it can be connected to ground. 4 5 S1 Source Terminal 1. Can be an input or an output. 5 7 S2 Source Terminal 2. Can be an input or an output. 6 8 S3 Source Terminal 3. Can be an input or an output. 7 9 S4 Source Terminal 4. Can be an input or an output. 8 10 D Drain Terminal. Can be an input or an output. 9 12 S8 Source Terminal 8. Can be an input or an output. 10 13 S7 Source Terminal 7. Can be an input or an output. 11 14 S6 Source Terminal 6. Can be an input or an output. 12 15 S5 Source Terminal 5. Can be an input or an output. 13 17 VDD Most Positive Power Supply Potential. 14 18 GND Ground (0 V) Reference. 15 19 A2 Logic Control Input. 16 20 A1 Logic Control Input. Table 5. ADG508A Truth Table

The entire system operates from a single 15 V power supply. has both low charge injection and IS (OFF) leakage current. voltage reference on a monolithic CMOS chip. Figure 23. ADG508A in a Single-Supply Octal DAC Circuit

Rev. D | Page 16 of 16 ORDERING GUIDE Model Temperature Range Package Description Package Option ADG508AKN −40°C to +85°C 16-Lead Plastic Dual In-Line Package [PDIP] N-16 ADG508AKNZ1 −40°C to +85°C 16-Lead Plastic Dual In-Line Package [PDIP] N-16 ADG508AKR −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG508AKR-REEL −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG508AKR-REEL7 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG508AKRZ1 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG508AKRZ-REEL1 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG508AKRZ-REEL71 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG508AKP −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG508AKP-REEL −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG508AKPZ1 −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG508AKPZ-REEL1 −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG508ABQ −40°C to +85°C 16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16 ADG508ATQ −55°C to +125°C 16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16 ADG508ATE −55°C to +125°C 20-Terminal Ceramic Leadless Chip Carrier [LCC] E-20-1 ADG508ABCHIPS DIE ADG508ATCHIPS DIE ADG509AKN −40°C to +85°C 16-Lead Plastic Dual In-Line Package [PDIP] N-16 ADG509AKNZ1 −40°C to +85°C 16-Lead Plastic Dual In-Line Package [PDIP] N-16 ADG509AKR −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG509AKR-REEL −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG509AKR-REEL7 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG509AKRZ-REEL1 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG509AKRZ-REEL71 −40°C to +85°C 16-Lead Standard Small Outline Package [SOIC_N] R-16 ADG509AKP −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG509AKP-REEL −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG509AKPZ1 −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG509AKPZ-REEL1 −40°C to +85°C 20-Lead Plastic Leaded Chip Carrier [PLCC] P-20 ADG509ABQ −40°C to +85°C 16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16 ADG509ATQ −55°C to +125°C 16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16 ADG509ATQ/883B −55°C to +125°C 16-Lead Ceramic Dual In-Line Package [CERDIP] Q-16 ADG509ABCHIPS DIE ADG509ATCHIPS DIE 1 Z = RoHS Compliant Part. ©2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the prop erty of their respective owners. D00051-0-7/09(D)