DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
VER : A_3 update : 2015.05.22 AC-DC Din Rail Power Supply ADF240 240 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ADF240-24S ADF240-48S Max Output Wattage (Free air Convection) (W) 240W Voltage 90-264 VAC or 120-370 VDC Frequency (Hz) 47-63 Hz Current (Full load) <3.0 A max. (115 VAC) / <1.5 A max. (230 VAC) Inrush Current (<2ms) <30 A max. (115 VAC) / <60 A max. (230 VAC) Leakage Current < 1.5 mA max. Input Power Factor PF>0.98 (115 VAC) / PF>0.94 (230 VAC) at Full Load Voltage (V.DC.) 24V 48V Trim ±2% (Adjustable VR on the front panel) Voltage Accuracy ±2% Current (Free air Convection) (A) (max.) 10 5 Line Regulation ±0.5% Load Regulation ±1% Minimum Load 2% Maximum Capacitive Load 7000 uF 1500 uF Ripple & Noise (max.) 100mVp-p Efficiency (typ.) (at 230 VAC) (Note 4) 92% 93% Output Hold-up Time 20 ms (115 VAC) / 20 ms (230 VAC) at Full Load Over Power Protection Auto recovery, Hiccup mode Over Voltage Protection 27~31V (Latch Off) 52~56V (Latch Off) Over Temperature Protection Auto recovery Protection Short Circuit Protection Auto recovery, Hiccup mode Function DC OK Relay Contact Ratings (max .) 30Vdc/1A, 30Vac/0.5A Resistive Load Input-Output (V.AC) 3000V Input-FG (V.AC) 1500V Isolation Output-FG (V.AC) 500V Operating Temperature -40°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.05%/°C Humidity 95% RH MTB >169K h @ 25°C (MIL-HDBK-217F) Environment Vibration 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y , Z axes. Weigh 850 g Physical Cooling Method Free convection Agency Approvals CE(EN 60950-1) (Pending) Isolation Rsistance I/P-O/P, I/P-FG, O/P- FG:>100M Ohms / 500VDC / 25°C / 70% RH EMI (Conducted & Radiated Emission) EN 55022 class B (Pending) Safety & EMC EMS (Noise Immunity) EN61000-4-2,3,4,5,6,8,11, EN 55024, EN 61000-6-2, EN 61204-3, Heavy Industry Level, Criteria A, (Pending) KEY FEATURES Protections: Short Circuit / Overload / Over Voltage / Over Temperature With P.F.C. Function, PF>0.95 Free Air Convection High Efficiency up to 93% Built-in DC OK Relay Contact 3-Year Product Warranty
VER : A_3 update : 2015.05.22 AC-DC Din Rail Power Supply ADF240 240 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- DERATING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and +25°C of ambient temperature. 2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. Derating may be needed under low input voltage. Please check the derating curve for more details. 4. After 30 minutes of burn-in 5. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 4. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw BLOCK DIAGRAM
VER : A_3 update : 2015.05.22 AC-DC Din Rail Power Supply ADF240 240 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3- DC OK RELAY CONTACT Contact Close PSU Turns Off / DC Fail Contact Open PSU Turns On / DC Ok Contact Ratings (max.) 30V / 1A Resistive Load MECHANICAL DIMENSION ( Top View ) PIN# Single 1 +DC OK 2 NC 3 NC 4 NC 5 +DC OUT 6 +DC OUT 7 -DC OK & GND
8 GND
PIN# Single
10 AC IN (N)
11 AC IN (L)
VER : A_3 update : 2015.05.22 AC-DC Din Rail Power Supply ADF240 240 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -4- EFFICIENCY VERSUS LOAD ADF240-24S VIN VS Efficiency LOAD VS Efficiency Input Voltage (V) 90 115 180 230 264 Load (%) 10 20 30 40 50 Load (%) 60 70 80 90 100 83.00% 84.00% 85.00% 86.00% 87.00% 88.00% 89.00% 90.00% 91.00% 92.00% 93.00% 94.00% 90V 115V 180V 230V 264V VIN EFF% 0.00% 10.00% 20.00% 30.00% 40.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% LOAD EFF% ADF240-48S VIN VS Efficiency LOAD VS Efficiency Input Voltage (V) 90 115 180 230 264 Load (%) 10 20 30 40 50 Load (%) 60 70 80 90 100 85.00% 86.00% 87.00% 88.00% 89.00% 90.00% 91.00% 92.00% 93.00% 94.00% 95.00% 90V 115V 180V 230V 264V VIN EFF% 0.00% 10.00% 20.00% 30.00% 40.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% LOAD EFF%