ADER-8000-1K0

AEDR-8000 BOARDCOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Features

• Reflective technology
• Surface mount small outline leadless package
• Direct replacement of HEDR-8000 encoder
• Single channel incremental output
• Two channels quadrature outputs for direction sensing
• Single 5 V supply, TTL compatible output
• -20 °C to 85°C absolute operating temperature
• Lead-free package
• Encoding resolution options: 75, 150 and 180 (lines/inch) or 2.95, 5.91, 7.09 (lines/mm)
• PCB height profile options: 1.0 mm PCB thickness 1.5 mm PCB thickness

Description

By introducing an additional PCB top-up thickness attached to the encoder, the AEDR-8000 Encoder series could easily solve the height issue in various applications. Furthermore, this great feature is enhanced with the offering of different height profile options. Direct Replacement of HEDR-8000 Encoder series is now possible with the AEDR-8000 Encoder series. Such migration is always simple and easy due to the perfect matching of the height profiles as well as same footprints in both encoder series. The AEDR-8000 Encoder series employs reflective technology for rotary and linear movement control. The encoder houses an LED light source and a photo- detecting circuitry in a single package. In adding on to the main features, The AEDR-8000 Encoder series offers two-channel quadrature digital outputs (TTL compatible) where signal could be interfaced directly with most of the signal processing circuitries. Thus, it’s bound to reduce the design time of an application.

Applications

The AEDR-8000 Encoder series provides motion sensing at a competitive price, making it ideal for high volume applications. Its small size and surface mount package make it ideal for printers, copiers, card readers and many consumer products, particularly where space and weight are design constraints. Note: All specifications are subject to change without prior notification.

Block Diagram of AEDR-8000 Encoder Definitions State Width (S): The number of electrical degrees between a transition in Channel A and the neighboring transition in Channel B. There are 4 states per cycle, each nominally 90°e. State Width Error (DS): The deviation of state width, in electrical degrees, from its ideal value of 90°e. Phase (f): The number of electrical degrees between the center of high state of Channel A and the center of high state of Channel B. Nominally 90°e. Phase Error (Df): The deviation of phase, in electrical degrees, from its ideal value of 90°e. Pulse Width (P): The duration of high state of the output, in electrical degrees, within one cycle. Nominally 180°e or half a cycle. Pulse Width Error (DP): The deviation of pulse width, in electrical degrees, from its ideal value of 180°e. Count (N): The number of window and bar pairs per revolution (CPR) of codewheel. For linear codestrip, defined as the number of window and bar pairs per unit length (lines per inch [LPI] or lines per mm [LPmm]). One Cycle (C): 360 electrical degrees (°e). Equivalent to one window and bar pair. One Shaft Rotation: 360 mechanical degrees. Also equivalent to N counts (codewheel only). SIGNAL PROCESSING CIRCUITRY VCC CH A VLED GND CH B GND R CODEWHEEL or CODESTRIP Theory of Operation The AEDR 8000 Encoder series combines an emitter and a detector in a single surface mount leadless package. When used with a codewheel or linear codestrip, the encoder translates rotary or linear motion into digital outputs. As seen in the block diagram, the AEDR-8000 Encoder series consists of three major components: a light emitting diode (LED) light source, a detector IC consisting photodiodes, and lens to focus light beam from the emitter as well as light falling on the detector. The operation of the encoder is based on the principle of optics where the detector photodiodes sense the absence and presence of light. In this case, the rotary/ linear motion of an object being monitored is converted to equivalent light pattern via the use of codewheel/codestrip. As shown in the above diagram, the reflective area (window) of the codewheel (or codestrip) reflects light back to the photodetector IC, whereas no light is reflected by the non-reflective area (bar). An alternating light and dark pattern, corresponding to the window and bar, falls on the photodiodes as the codewheel rotates. The moving light pattern is exploited by the detector circuitry to produce digital outputs representing the rotation of the codewheel. When the codewheel is coupled to a motor, the encoder outputs are then a direct representation of the motor rotation. The same concept applies to the use of a codestrip to detect linear motion.

Line Density: The number of window and bar pairs per unit length, expressed in either lines per inch (LPI) or lines per mm (LPmm). Optical Radius (Rop): The distance between the codewheel center and the centerline between the two domes of the encoder. Output Waveform CH. A ALL FOUR STATES (S1 to S4) ARE MAINTAINED. CH. B P C S2 S3 CODEWHEEL ROTATION OR LINEAR MOVEMENT AMPLITUDE S4 f SHAFT RADIAL (ER) TANGENTIAL (ET) AEDR-8000 CODEWHEEL SHAFT ANGULAR (EA) AEDR-8000 CODEWHEEL Gap (G): The distance from the surface of the encoder to the surface of codewheel or codestrip. Specular Reflectance (R f): The amount of incident light reflected by a surface. Quantified in terms of the percentage of incident light. A spectrometer can be used to measure specular reflectance of a surface (contact factory for more information). Radial and Tangential Misalignment Error (E R, ET): For rotary motion, mechanical displacement in the radial and tangential directions relative to the nominal alignment. Angular Misalignment Error A): Angular displacement of the encoder relative to the tangential line.

Storage Temperature, T S -40°C to 85°C Operating Temperature, T A -20°C to 85°C Supply Voltage, VCC -0.5 V to 7 V Output Voltage, VO -0.5 V to VCC Output Current per Channel, I OUT -1.0 mA to 8 mA ESD Human Body Model JESD22-A114-A Class 2 Machine Model JESD22-A115-A Class B Notes: 1. Exposure to extreme light intensity (such as from flashbulbs or spotlights) may cause permanent damage to the device. 2. CAUTION: It is advised that normal static precautions should be taken when handling the encoder in order to avoid damage and/ or degradation induced by ESD. 3. Proper operation of the encoder cannot be guaranteed if the maximum ratings are exceeded. Recommended Operating Conditions Parameter Sym. Min. Typ. Max. Units Notes Temperature T A 02 5 8 5 °C Supply Voltage V CC 4.5 5.0 5.5 V Ripple < 100 mVp-p LED Current I LED 13 15 18 mA See note 1 Load Capacitance C L 100 pF 2.7 k Ω Pull-Up Count Frequency f 30 kHz See note 2 Radial Misalignment E R ±0.38 mm (in.) (±0.015) Tangential Misalignment E T ± 0.38 mm (in.) (± 0.015) Angular Misalignment E A 0 ± 1.5 deg. Codewheel/Strip Tilt C T 0 1 deg. Note: 1. Refer to “LED Current Limiting Resistor ” on page 5. 2. Count frequency = velocity (RPM) x N/60. Encoding Characteristics Encoding characteristics over the recommended operating condition and mounting conditions. Parameter Symbol Typical Maximum Unit Notes Pulse Width Error DP1 5 5 5 °e AEDR-8010-K Pulse Width Error (Ch. A, Ch. B) DP 15, 25 55, 75 °e AEDR-8000-K 16 75 AEDR-8100-P 16 75 AEDR-8100-Q Phase Error Df 12 60 °e AEDR-8000-K 10 60 AEDR-8100-P 10 60 AEDR-8100-Q Note: Typical values represent the encoder performance at typical mounting alignment, whereas the maximum values represent the encod er performance across the range of recommended mounting tolerance.

Electrical Characteristics

Characteristics over recommended operating conditions at 25 °C. Parameter Symbol Min. Typ. Max. Unit Notes Detector Supply Current I cc 2.2 5.0 mA High Level Output Voltage V OH 2.4 V I OH = -0.2 mA Low Level Output Voltage V OL 0.4 V I OL = 8.0 mA Rise Time t r 500 ns C L = 25 pF Fall Time t f 100 ns RL = 2.7 kΩ Recommended Codewheel and Codestrip Characteristics Parameter Symbol Min. Max. Unit Notes Window/Bar Ratio Ww/Wb 0.9 1.1 Window/Bar Length L W 1.80 (0.071) 2.31 (0.091) mm (inches) Specular Reflectance R f 60 85 Reflective area. See note 1. – 10 Nonreflective area 2.95 (75) AEDR-80X0-K 5.91 (150) AEDR-8100-P 7.09 (180) AEDR-8100-Q Optical Radius Rop 11 – mm Recommended value Notes: 1. Measurements from TMA µScan meter. Contact factory for more information. 2. Contact factory for more information on compatibility of codewheel/strip. LED Current Limiting Resistor A resistor to limit current to the LED is required. The recommended value is 220 Ω (±10 %) and the resistor should be placed in series between the 5V supply and pin 3 of the device led). This will result in an LED current of approximately 15 mA. Moisture Sensitive Level The AEDR-8000 series is specified to moisture sensitive level (MSL) 3. Wb Ww Ww Wb Lw Rop Lw

6.2 4.4 TOP VIEW 3.2 2.7 1.01.5 SIDE VIEW (LOW RESOLUTION) SIDE VIEW (HIGH RESOLUTION) ALL DIMENSIONS ARE IN MILLIMETERS TOLERANCE X.XX ± 1.5 mm NC GND CH A VCC VLED NC CH B GND 0.62 1.28 0.64 0.4 1.02 0.4 1.54 0.84 1.62 BOTTOM VIEW

designed such that both the LED and detector IC should be placed Mounting Consideration Direction of Codewheel Rotation With the emitter side of the encoder placed closer to the codewheel centre, Channel A parallel to the window/bar orientation, as shown. As such, the encoder is tolerant against Viewed from Top CODESTRIP DIRECTION OF RADIAL PLAY CODEWHEEL DIRECTION OF RADIAL PLAY CH. A LEADS CH. B EMITTER ANTI-CLOCKWISE CH. B LEADS CH. A EMITTER CLOCKWISE leads Channel B when the codewheel rotates anti-clockwise and vice versa. radial play of ± 0.38mm. The emitter side should be placed closer to the rotating shaft. ROP 11.00 mm (0.433 IN) < ROP < ∞ CODEWHEEL/CODESTRIP GAP

Recommended Lead-Free Reflow Soldering Temperature Profile Preheat Temperature 40°C to 125°C = 120 sec. max. Temperature Maintain Above 217 °C = 60 – 150 sec. Peak Temperature = 255 ± 5°C Time Above 250°C = 10 – 20 sec. Note: Due to treatment of high temperature, AEDR-8000 transparent compound is expected to turn yellow after IR reflow. Resolution Indicator Since the encoder is too small to imprint resolution marking on its package, color-coding the package is employed to differentiate resolutions. The details are: LPI 75 150 180 Color Clear Red Amber 300 250 200 150 100 01 22 45 66 87 108 129 150 171 192 213 235 256 278 299 320 341 363 384 255°C 250°C 217°C 40°C 125°C 10 - 20 SEC. 120 SEC. MAX. 60 - 150 SEC. TIME (SEC.) HEAT UP SOLDER PASTE DRY SOLDER REFLOW COOL DOWN TEMPERATURE (°C)

Ordering Information

PCB Thickness Number of Packaging Lines per Inch Shipping Units 0 - 1.5 mm (Low Channels 1 - Tape and K - 75 LPI 0 - 1000 pcs Resolution) 1 - One Channel Reel P - 150 LPI 1 - 500 pcs 1 - 1.0 mm (High 0 - Two Channels Q - 180 LPI 2 - 100 pcs Resolution) Note: Encoders are packed in tape of quantity 1000 pcs or 500 pcs or 100 pcs. Available Options Resolution Shipping Units Encoder 75 LPI 150 LPI 180 LPI 1000 pcs 500 pcs 100 pcs AEDR-8000 * * * * AEDR-8010 * * AEDR-8100 * * * * AEDR-8100 * * *

www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/Interna- tional), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2005 Agilent Technologies, Inc. May 24, 2005 5989-3067EN