ADD8504_10 AD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Rev. D | Page 2 of 12 TABLE OF CONTENTS

REVISION HISTORY

6/10—Rev. C to Rev. D Change to Features Section, Applications Section, and General Added Automotive Ordering Guide and Automotive Products 9/07—Rev. B to Rev. C 1/06—Rev. A to Rev. B Added Pin Configurations and Function 10/05—Rev. 0 to Rev. A 9/05—Revision 0: Initial Version

Rev. D | Page 3 of 12 SPECIFICATIONS

ELECTRICAL CHARACTERISTICS

VCC = 5 V , TA = 25°C, unless otherwise noted. VIN denotes buffer input voltage; ILOAD denotes load current; RL denotes load resistance; CL denotes load capacitance. Table 1. Parameter Symbol Conditions Min Typ Max Unit INPUT CHARACTERISTICS Offset Voltage VOS 0 V ≤ V IN ≤ 5 V 20 mV Input Common-Mode Voltage Range VCM 0 5 V Input Bias Current IB V IN = 2.5 V 2 50 nA Voltage Gain AVO 0.985 V/V OUTPUT CHARACTERISTICS Output Voltage High VOH I LOAD = +20 mA 4.75 V Output Voltage Low VOL I LOAD = −20 mA 0.2 V Output Resistance ROUT −20 mA ≤ ILOAD ≤ +20 mA; 0.5 V ≤ VIN ≤ 4.5 V 0.20 Ω Output Short-Circuit Current ISC 120 380 mA POWER SUPPLY Supply Current ISY V IN = 2.5 V ADD8504 2.7 3.8 mA ADD8505 3.0 4.4 mA ADD8506 3.9 5.1 mA Supply Voltage Range VCC 3.3 6.5 V DYNAMIC PERFORMANCE Slew Rate SR CL = 15 pF 7.0 V/μs RL = 250 Ω 6.2 V/μs Settling Time tS C L = 200 pF, RL = 10 kΩ 2.5 6 μs LOGIC INPUT CHARACTERISTICS Input Current Low IIL V IN = 0.0 V 100 nA Input Current High IIH V IN = 5.0 V 100 nA Input Voltage Low VIL V CC = 5.0 V, −40°C ≤ TA ≤ 105°C 0.8 V VCC = 3.3 V, −40°C ≤ TA ≤ 105°C 0.7 V Input Voltage High VIH VCC = 5.0 V, −40°C ≤ TA ≤ 105°C 1.7 V VCC = 3.3 V, −40°C ≤ TA ≤ 105°C 1.4 V

Table 3. Thermal Package Characteristics 1 θJA is specified for natural convection on a two-layer board. 3 Field induced charge device model.

a very large resistor ladder to save supply current. mum of 120 mA, ensuring a fast response to varying loads. multiple ground (GND) and supply (VCC) connections. Table 6. Mux Function

  1. RAx RESISTORS ARE USED TO SET POSITIVE INVERSION GAMMA VOLTAGES.
  2. RBx RESISTORS ARE USED TO SET NEGATIVE INVERSION GAMMA VOLTAGES.

24 TO COLUMN

Figure 12. ADD8506 Typical Application

Figure 13. 16-Lead Thin Shrink Small Outline Package [TSSOP]

6.40 BSC

Figure 14. 20-Lead Thin Shrink Small Outline Package [TSSOP]

0.10 COPLANARITY

Figure 15. 24-Lead Thin Shrink Small Outline Package [TSSOP]

Rev. D | Page 9 of 12 ORDERING GUIDE Model1 Temperature Range Package Description Package Option Ordering Quantity ADD8504WRUZ −40°C to +105°C 16-Lead Thin Shrink Small Outline Package [TSSOP], Tube RU-16 96 ADD8504WRUZ-REEL7 −40°C to +105°C 16-Lead Thin Shrink Small Outline Package [TSSOP], 7” Tape and Reel RU-16 1,000 ADD8504WRUZ-REEL −40°C to +105°C 16-Lead Thin Shrink Small Outline Package [TSSOP], 13” Tape and Reel RU-16 2,500 ADD8505WRUZ −40°C to +105°C 20-Lead Thin Shrink Small Outline Package [TSSOP], Tube RU-20 75 ADD8505WRUZ-REEL7 −40°C to +105°C 20-Lead Thin Shrink Small Outline Package [TSSOP], 7” Tape and Reel RU-20 1,000 ADD8505WRUZ-REEL −40°C to +105°C 20-Lead Thin Shrink Small Outline Package [TSSOP], 13” Tape and Reel RU-20 2,500 ADD8506WRU-REEL7 −40°C to +105°C 24-Lead Thin Shrink Small Outline Package [TSSOP], 7” Tape and Reel RU-24 1,000 ADD8506WRUZ −40°C to +105°C 24-Lead Thin Shrink Small Outline Package [TSSOP], Tube RU-24 62 ADD8506WRUZ-REEL7 −40°C to +105°C 24-Lead Thin Shrink Small Outline Package [TSSOP], 7” Tape and Reel RU-24 1,000 ADD8506WRUZ-REEL −40°C to +105°C 24-Lead Thin Shrink Small Outline Package [TSSOP], 13” Tape and Reel RU-24 2,500 ADD8504-EVAL Evaluation Board ADD8505-EVAL Evaluation Board ADD8506-EVAL Evaluation Board 1 Z = RoHS Compliant Part. AUTOMOTIVE ORDERING GUIDE Automotive Model1 Temperature Range Package Description Package Option Ordering Quantity ADD8506WWARUZR7 −40°C to +105°C 24-Lead Thin Shrink Small Outline Package [TSSOP], 7” Tape and Reel RU-24 1,000 1 Qualified for automotive applications. AUTOMOTIVE PRODUCTS The ADD8506WW ARUZR7 model is available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that the automotive model may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade product shown is available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for this model.

Rev. D | Page 10 of 12 NOTES

Rev. D | Page 11 of 12 NOTES

Rev. D | Page 12 of 12 NOTES ©2005–2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the prop erty of their respective owners. D05549-0-6/10(D)