ADCMP350_04 AD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Comparators and Reference Circuits ADCMP350/ADCMP352/ADCMP354/ADCMP356 Rev. 0 Information furn ished by An alog D evices is believed to be accurate and reliable. However, n o resp onsibility is assume d b y A nalog De vices fo r its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or p atent rights of Analog De vices. Trademarks an d registered trademarks are the property of their respective owners. Tel: 781.329.4700 www.analog.com Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.

FEATURES

Comparators with 0.6 V on-chip references Output stages: Open-drain active-low (ADCMP350) Push-pull active-low (ADCMP352) Open-drain active-high (ADCMP354) Push-pull active-high (ADCMP356) High voltage (up to 22 V) tolerance on VIN and open-drain output pins Low power consumption (10 µA) 10 nA input bias current 15 mV hysteresis 5 µs propagation delay Specified over −40°C to +125°C temperature range 4-lead SC70 package

APPLICATIONS

The ADCMP350/ADCMP352/ADCMP354/ADCMP356 parts are comparator and reference circuits suitable for use in general-purpose applications. The high voltage input and output structures will allow voltages of up to 22 V on the input of all devices and the output of the open-drain devices. High performance over the −40°C to +125°C temperature range makes them suitable for use in automotive and other thermally harsh applications, while low power consumption and space- efficient SC70 packaging make them ideal for battery-powered portable equipment. FUNCTIONAL BLOCK DIAGRAMS ADCMP350/ADCMP352 GND OUT (OD/PP) VCC VIN REF ADCMP354/ADCMP356 GND OUT (OD/PP) VCC VIN 04745-001 REF Figure 1. Table 1. Selection Table

ADCMP350/ADCMP352/ADCMP354/ADCMP356 Rev. 0 | Page 2 of 12 TABLE OF CONTENTS

REVISION HISTORY

10/04—Revision 0: Initial Version

ADCMP350/ADCMP352/ADCMP354/ADCMP356 Rev. 0 | Page 3 of 12 SPECIFICATIONS VCC = Full operating range, TA = –40°C to +125°C, unless otherwise noted. Table 2. Parameter Min Typ Max Unit Test Conditions/Comments SUPPLY VCC Operating Voltage Range 2.25 5.5 V VIN Operating Voltage Range 0 22 V Supply Current 10 15 µA VIN THRESHOLD RISING 0.579 0.6 0.621 V VCC = 3.3V, TA = −40°C to +85°C 0.579 0.6 0.624 V VCC = 3.3V, TA = −40°C to +125°C VIN THRESHOLD FALLING 0.564 0.585 0.606 V VCC = 3.3V, TA = −40°C to +85°C 0.564 0.585 0.609 V VCC = 3.3V, TA = −40°C to +125°C INPUT BIAS CURRENT 10 nA VIN = 0.6 V 170 µA VIN = 22 V THRESHOLD TEMPERATURE COEFFICIENT 30 ppm/°C VIN TO OUT DELAY 5 µs VIN = VTH to (VTH − 100 mV) OUT VOLTAGE LOW 0.4 V VIN < VTH min, ISINK = 1.2 mA OUT VOLTAGE HIGH 0.8 × VCC V VIN > VTH max, ISOURCE = 500 µA, Push-pull only OUTPUT RISE TIME 30 ns Cout = 15 pF OUTPUT FALL TIME 45 ns Cout = 15 pF OUTPUT LEAKAGE CURRENT 1 µA OUT = 22 V, open drain only

ADCMP350/ADCMP352/ADCMP354/ADCMP356 Rev. 0 | Page 4 of 12 ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 3. Parameter Rating VCC −0.3 V to +6 V VIN −0.3 V to +25 V OUT (Open Drain) −0.3 V to +25 V OUT (Push-Pull) −0.3 V to (VCC + 0.3 V) Operating Temperature Range −40°C to +125°C Storage Temperature Range −65°C to +150°C θJA Thermal Impedance, SC70 146°C/W Lead Temperature Soldering (10 sec) 300°C Vapor Phase (60 sec) 215°C Infrared (15 sec) 220°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.

Figure 2. Pin Configuration Table 4. Pin Function Descriptions 1 VIN Monitors Analog Input Voltage. Connected to inverting or noninverting input, depending on model number. 3 OUT Digital Output. Open-drain or push-pull options, depending on model number.

0.10 MAX

0.10 COPLANARITY

0.65 BSC

Figure 21. 4-Lead Thin Shrink Small Outline Transistor Package [SC70]

ADCMP350/ADCMP352/ADCMP354/ADCMP356 Rev. 0 | Page 11 of 12 NOTES

ADCMP350/ADCMP352/ADCMP354/ADCMP356 Rev. 0 | Page 12 of 12 NOTES © 2004 Analog De vices, Inc. All right s reserved . Trad emarks and registered tra demarks are the prop erty of their respective owners . D05112-0-10/04(0)