ASD-FILTREX-F GAMEWELL-FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Suited for harsh environments. High performance filter removes particulate of 25 microns. Compatible with most Gamewell-FCI analog address- able series fire control panels. Bicolor LEDs flash green whenever the sensor is addressed, and light steady red on alarm.* Note: Only the red LED is operat ive in panels that do not operate in Velociti™ mode.
Ordering Information
ASD-FILTREX-F Analog PE Smoke Sensor for Harsh Environments ADB-FILTREX-F Sensor Base, Flanged RF-FTX Replacement filters/caps for detector (6-pack) ASD-FILTREX-F An ISO 9001-2000 Company APPROVED FM 3023594 SIGNALING 07272-0694:263S1913 MEA Approved 219-02-E Vol.VI
12 Clintonville Road, Northford, CT 06472-1610 USA Tel: (203) 484-7161 Fax: (203) 484-7118
9020-0621 Rev. C1 page 2 of 2 www.gamewell-fci.com Description (Continued) While providing a solution for many hostile environments, the ASD-FILTREX-F is not considered applicable for use in corrosive, hazardous or explosive areas or conditions exceeding the ambient conditions specified in the table. Sensitivity is tested via a magnet placed against the hous- ing per the Installation Instructions. Specifications Operating Voltage: 15 - 32 VDC Standby Current (SLC): .00036 A Alarm Current (SLC): .007 A Current (Auxiliary): .006 A standby, .060 A checking for smoke, .080 A when checking for airflow. Operating/Installation Temperature: 32° to 120° F (0 to 49° C) Operating Humidity: 10 to 93% (non-condensing) Dimensions: 4 1/2” H x 4” W x 1 1/4” (11.4 x 10.1 x 3.2 cm)