AD6C211-L SSOUSA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

1 Form A

The AD6C211-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This device also includes current- limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to limit load current, thereby protecting the device as well as downstream components.

DESCRIPTION

OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS* APPROVALS Current limiting• Low input control power consumption (2.5mA TYP)• 140mA maximum continuous load current• 25 ohms maximum on-resistance• High input-to-output isolation• Long life/high reliability• Reed relay replacement• Meter reading systems• Medical equipment• Battery monitoring• Multiplexers• Surface Mount Leadform Option• -S Tape and Reel Option• -TR NOTE: Suffixes listed above are not included in marking on device for part number identification. PARAMETER UNIT MIN TYP MAX Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V 6 Output Power Dissipation mW 800 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. BABT CERTIFICATE #607836: BS EN 60950, BS EN 41003, BS EN 60065 CSA CERTIFICATE #LR111581-1• UL FILE #E90096• © 2004 Solid State Optronics • San José, CA Page 1 of 5 AD6C211-L rev 1.40 (10/25/2004)

ELECTRICAL CHARACTERISTICS - 25°C PARAMETER UNIT MIN TYP MAX TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V 1.2 1.5 If = 10mA LED Reverse Voltage V 61 2 Ir = 10uA Turn-On Current m 2.5 5 Io = 140mAA Turn-Off Current m 0.5A OUTPUT SPECIFICATIONS Continuous Load Current m 140 If = 5mAA Current Limit m 180 220 250 If = 5mAA On-Resistance Ω 18 25 Io = 140mA Leakage Current µ 0.2 1 Vo = 400VA Blocking Voltage V 400 Io = 1uA Output Capacitance p 25 50 Vo = 25V, f = 1.0MHzF Offset Voltage m 0.2 If = 5mAV COUPLED SPECIFICATIONS Isolation Voltage V 2500 T = 1 minute -H Suffix V 3750 T = 1 minute Turn-on Time m 1 2 If = 5mA, Io = 140mAs Turn-off Time m 0.5 1 if = 5mA, Io = 140mAs Isolation Resistance G 100Ω Coupled Capacitance p 3F Contact Transient Ratio V 2000 7000 dV = 50V/ µ s © 2004 Solid State Optronics • San José, CA Page 2 of 5 AD6C211-L rev 1.40 (10/25/2004)

Turn-Off Time (ms) Device Count AD6C211-L Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 17 18 19 20 21 22 23 24 O n-R esistance (ohms) Device Count AD6C211-L Leakage Current (uA) Device Count Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C AD6C211-L Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 380 400 420 440 460 480 500 520 Blocking Voltage (V) Device Count AD6C211-L 100 150 -40 -20 0 20 40 60 80 Temperature (C) Load Current (mA) Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C AD6C211-L Maximum Load Current vs. Temperature Turn-On Time (ms) Device Count AD6C211-L Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C © 2004 Solid State Optronics • San José, CA Page 3 of 5 AD6C211-L rev 1.40 (10/25/2004)

6 PIN DUAL IN-LINE PACKAGE 6 PIN SURFACE MOUNT DEVICE

© 2004 Solid State Optronics • San José, CA Page 4 of 5 AD6C211-L rev 1.40 (10/25/2004)

Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the applicat ion or use of any product or circuit described herein. Neither ci rcuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we mak e no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of su ch use and agree to indemnify SSO against any an d all damages resulting from such use. Life support devices are def ined as devices or systems which, (a) are intended for surgical im plant into the body, or (b) support or sustain life, and (c) whose failure to perf orm when used properly in accordance with instructions for u se can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to c ause failure of the life support device or system, or to affect its safety or effe ctiveness. © 2004 Solid State Optronics • San José, CA Page 5 of 5 AD6C211-L rev 1.40 (10/25/2004)