DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

Rev. G | Page 2 of 16 TABLE OF CONTENTS

REVISION HISTORY

1/13—R ev. F to Rev. G 11/12—Rev. E to Rev. F Changes to Features Section, General Description Section, and Changes to (Unbolded) For 8-Lead SOIC Package, AD590J and Changes to Explanation of T emperature Sensor Specifications 9/09—R ev. D to R ev. E 1/06—R ev. C to R ev. D 9/03—R ev. B to R ev. C

Rev. G | Page 3 of 16 SPECIFICATIONS AD590J AND AD590K SP ECIFICATIONS 25°C and VS = 5 V, unless otherwise noted.1 Table 1. AD590J2 AD590K Parameter Min Typ Max Min Typ Max Unit POWER SUPPLY Operating Voltage Range 4 30 4 30 V OUTPUT Nominal Current Output @ 25°C (298.2 K) 298.2 298.2 µA Nominal T emperature Coefficient 1 1 µA/K Calibration Error @ 25°C ±5.0 ±2.5 °C Absolute Error (Over Rated Performance T emperature Range) Without External Calibration Adjustment ±10 ±5.5 °C With 25°C Calibration Error Set to Zero ±3.0 ±2.0 °C Nonlinearity For TO-52 and FLATPACK Packages ±1.5 ±0.8 °C For 8-Lead SOIC Package ±1.5 ±1.0 °C For 4-Lead LFCSP Package ±1.5 °C Repeatability 3 ±0.1 ±0.1 °C Long-T erm Drift4 ±0.1 ±0.1 °C Current Noise 40 40 pA/√Hz Power Supply Rejection 4 V ≤ VS ≤ 5 V 0.5 0.5 µA/V 5 V ≤ VS ≤ 15 V 0.2 0.2 µV/V 15 V ≤ VS ≤ 30 V 0.1 0.1 µA/V Case Isolation to Either Lead 1010 1010 Ω Effective Shunt Capacitance 100 100 pF Electrical T urn-On Time 20 20 µs Reverse Bias Leakage Current (Reverse Voltage = 10 V)5 10 10 pA 1 Specifications shown in bo ldface are tested on all production units at final electrical test. Results from those tests are used to calculate outgoing quality levels. All minimum and maximum specifications are guaranteed, although only those shown in boldface are tested on all production units. 2 The LFCSP package has a reduced operating temperature range of −40°C to +125°C. 3 Maximum deviation between +25°C readings after temperature cycling between −55°C and +150°C; guaranteed, not tested. 4 Conditions: constant 5 V, constant 125°C; guaranteed, not tested. 5 Leakage current doubles every 10°C.

minimum and maximum specifications are guaranteed, although only those shown in boldface are tested on all production units. 2 Maximum deviation between +25°C readings after temperature cycling between −55°C and +150°C; guaranteed, not tested. 3 Conditions: constant 5 V, constant 125°C; guaranteed, not tested. 4 Leakage current doubles every 10°C. Figure 5. Temperature Scale Conversion Equations

Rev. G | Page 5 of 16 ABSOLUTE MAXIMUM RATINGS Table 3. Parameter Rating Forward Voltage ( E+ or E−) 44 V Reverse Voltage (E+ to E−) −20 V Breakdown Voltage (Case E+ or E−) ±200 V Rated Performance Temperature Range1 −55°C to +150°C Storage Temperature Range1 −65°C to +155°C Lead Temperature (Soldering, 10 sec) 300°C

1 The AD590 was used at −100°C and +200°C for short periods of

measurement with no physical damage to the device. However, the absolute errors specified apply to only the rated performance temperature range. Applicable to 2-lead FLATPACK and 3-pin TO-52 packages only. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION

Table 4. Thermal Resistance 1 τ is dependent upon velocity of oil; average of several velocities listed above. instantaneous temperature change. Figure 16. Time Response Curve

Figure 27. 8-Lead Standard Small Outline Package [SOIC_N] Figure 28. 4-Lead Lead Frame Chip Scale Package [LFCSP_WD] REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.

0.00 MIN

0.80 REF

0.20 MIN

Rev. G | Page 15 of 16 ORDERING GUIDE Model 1, 2 Temperature Range Package Description Package Option Branding AD590JF −55°C to +150°C 2-Lead FLATPACK F-2 AD590JH −55°C to +150°C 3-Pin TO-52 H-03-1 AD590JR −55°C to +150°C 8-Lead SOIC_N R-8 AD590JRZ −55°C to +150°C 8-Lead SOIC_N R-8 AD590KF −55°C to +150°C 2-Lead FLATPACK F-2 AD590KH −55°C to +150°C 3-Pin TO-52 H-03-1 AD590KR −55°C to +150°C 8-Lead SOIC_N R-8 AD590KR-REEL −55°C to +150°C 8-Lead SOIC_N R-8 AD590KRZ −55°C to +150°C 8-Lead SOIC_N R-8 AD590KRZ-RL −55°C to +150°C 8-Lead SOIC_N R-8 AD590LF −55°C to +150°C 2-Lead FLATPACK F-2 AD590LH −55°C to +150°C 3-Pin TO-52 H-03-1 AD590MF −55°C to +150°C 2-Lead FLATPACK F-2 AD590MH −55°C to +150°C 3-Pin TO-52 H-03-1 AD590JCHIPS −55°C to +150°C Bare Die H-03-1 AD590JCPZ-R5 −40°C to +125°C 4-Lead LFCSP_WD CP-4-1 7A AD590JCPZ-RL7 −40°C to +125°C 4-Lead LFCSP_WD CP-4-1 7A 1 Z = RoHS Compliant Part. 2 The AD590xF models and the AD590xH model s are available in 883B.

Rev. G | Page 16 of 16 NOTES ©2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the prop erty of their respective owners. D00533-0-1/13(G)