AD4C101 SSOUSA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

The AD4C101 is a bi-directional, double-pole, single-throw, normally open MOSFET output solid-state relay. This device offers two discrete optically isolated SSRs in one miniature 8 pin DIP/SMD package. Each discrete relay consists of an infrared LED, optically coupled to a Photo Diode Array, which in turn drives a pair of back-to-back MOSFETs. Its high blocking voltage (600V) and the integration of 2 devices in one package make the AD4C101 ideal in applications with board space constraints where high load voltages are encountered.

DESCRIPTION

OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS* APPROVALS High Blocking Voltage (600V)• Two discrete relays in compact 8 pin DIP/SMD package• High Input-Output Isolation (3.75kV)• 120mA Continuous Load Current (each pole, individually)• On-Resistance 40 ohms MAX• Long Life / High Reliability• Lead-Free / RoHS - WEEE Compliant• EMR replacement• Meter Reading Systems• Medical Equipment• Battery Monitoring• Multiplexers• Surface Mount Leadform Option (50pcs / tube)• -S Tape & Reel Packing Option (1,000pcs/reel)• -TR NOTE: Suffixes listed above are not included in marking on device for part number identification. PARAMETER UNIT MIN TYP MAX Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V 6 Output Power Dissipation mW 800 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. UL / C-UL Approved: File # E90096, E201932• CSA Approved: Certificate # LR111581-1• Page 1 of 5 AD4C101 © 2009 Solid State Optronics • San José, CA

ELECTRICAL CHARACTERISTICS - 25°C PARAMETER UNIT MIN TYP MAX TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V 1.8 2 If = 10mA LED Reverse Votlage V 0.5 Ir = 10uA Turn-On Current m 1.75 5 Io = 120mAA Turn-Off Current m 0.2A OUTPUT SPECIFICATIONS Blocking Voltage V 600 Io = 1uA Continuous Load Current m 120 If = 5mA, each pole, individuallyA On-Resistance Ω 30 40 Io = 120mA Leakage Current µ 0.2 1 Vo = 600VA Output Capacitance p 6 If = 0, f = 1.0MHzF Offset Voltage m 0.2 If = 5mAV COUPLED SPECIFICATIONS Isolation Voltage V 3750 T = 1 minute Turn-On Time m 0.75 5 If = 5mA, Io = 120mAs Turn-Off Time m 0.05 2 If = 0mA, Io = 120mAs Isolation Resistance G 100Ω Coupled Capacitance p 3F Contact Transient Ratio V 2000 7000 dV = 50V/ µs Page 2 of 5 AD4C101 © 2009 Solid State Optronics • San José, CA

Turn-Off Time (ms) Device Count AD4C101 Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 27 28 29 30 31 32 33 34 On-Resistance (ohms) Device Count AD4C101 Leakage Current (uA) Device Count Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C AD4C101 Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 600 610 620 630 640 650 660 670 Blocking Voltage (V) Device Count AD4C101 100 150 -40 -20 0 20 40 60 80 Temperature (C) Load Current (mA) Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C AD4C101 Maximum Load Current vs. Temperature Turn-On Time (ms) Device Count AD4C101 Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Page 3 of 5 AD4C101 © 2009 Solid State Optronics • San José, CA

8 PIN DUAL IN-LINE PACKAGE 8 PIN SURFACE MOUNT DEVICE

© 2009 Solid State Optronics • San José, CA

Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this docume nt. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the appl ication or use of any product or circuit described herein. Neither ci rcuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we mak e no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any an d all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical im plant into the body, or (b) support or sustain life, and (c ) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to caus e failure of the life support device or system, or to affect its safety or effe ctiveness. Page 5 of 5 AD4C101 © 2009 Solid State Optronics • San José, CA