AD15-D05

AD15 REICU | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 1

Technical content

Features

Efficiency up to 79% 2500VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB mounting design Universal Input :85 ~ 264VAC,47～440Hz ADM5 Series AC/DC CONVERTER Page 1 of 2 REV:13.1 Page 2 of 2 REV:13.1 AD5 Series AC/DC CONVERTER 5W Efficiency up to 80% 2500VAC Isolation Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AD5-S03 AD5-S05 AC(V) DC(V) Input 1000 1000 3.3 Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB mounting design Plastic case Universal Input :85 ~ 264VAC,50/60Hz AD5 Series AC/DC CONVERTER AD5-S09 AD5-S12 AD5-S15 AD5-S24 Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Design & Feature Considerations Reduce output ripple, it is recommended to use capacitors at the output. 1. Output Ripple Reduction It is recommended to use 47~100uF capacitors at the output. Tthe products provide protection against overload, the unit is equipped with internal current limiting circuitry . 2. Overload Protection Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% %

60 KHzSwitching frequency Full load,nominal input

Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms AD5-D05 +12 +15 AD5-D12 AD5-D15 85-264 120-370 +500 556 417 333 208 +208 +167 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms AD5-D05-24 AD5-D05-12 5/5 800/200AD5-D05-05 5/12 800/100 -25 +85 -40 +105

2500 VAC

MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Platic Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Design & Feature Considerations Reduce output ripple, it is recommended to use capacitors at the output. 1. Output Ripple Reduction It is recommended to use 47~100uF capacitors at the output. Tthe products provide protection against overload, the unit is equipped with internal current limiting circuitry . 2. Overload Protection AC(L) AC(N) +Vo DC/DC Converter Cout Load 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection.

5 Specifications subject to change without notice

-25 +70 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material plastic Lateral View Mechanical Dimension & Pin Connections Bottom View 45.0 (1.77) 35.00 (1.38) 55.0(2.17) 10.0 (0.390) 47.0(1.85) 20.0 (0.79) 20.5(0.81) 6.10(0.24) 1.00 (0.04) DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 Recommend capacitive(uF) Page 1 of 2 REV:13.1 Page 2 of 2 REV:13.1 AD10 Series AC/DC CONVERTER 10W Efficiency up to 81% 2500VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastic case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AD10-S03 AD10-S05 AC(V) DC(V) Input 2000 2000 3.3 Universal Input :85 ~ 264VAC,50/60Hz AD10 Series AC/DC CONVERTER AD10-S09 AD10-S12 AD10-S15 AD10-S24 AD10-D05 +12 +15 AD10-D12 AD10-D15 85-264 120-370 +1000 1111 833 667 417 +417 +333 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms AD10-D05-05 AD10-D05-24 5/12 1600/200AD10-D05-12 5/24 1600/100 -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Platic Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Recommend capacitive(uF) Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 45.0 (1.77) 35.00 (1.38) 62.0(2.40) 10.0 (0.39) 54.0(2.13) 20.0 (0.79) 22.5(0.89) 6.10(0.24) 1.00 (0.04) Page 1 of 2 REV:15.1 Page 2 of 2 REV:15.1 ADM15 Series AC/DC CONVERTER 15W Efficiency up to 83% 3000VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastic case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output ADM15-S03 ADM15-S05 AC(V) DC(V) Input 3000 3000 3.3 Universal Input :85 ~ 264VAC,50/60Hz ADM15 Series AC/DC CONVERTER ADM15-S09 ADM15-S12 ADM15-S15 ADM15-S24 ADM15-D05 +12 +15 ADM15-D12 ADM15-D15 85-264 120-370 +1500 1667 1250 1000 625 +625 +500 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms ADM15-D05-05 ADM15-D05-24 5/12 1800/500ADM15-D05-12 5/24 1600/300 -25 +85 -40 +105

3000 VAC

MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Platic Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Recommend capacitive(uF) Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 45.0 (1.77) 35.00 (1.38) 55.0(2.17) 10.0 (0.390) 47.0(1.85) 20.0 (0.79) 20.5(0.81) 6.10(0.24) 1.00 (0.04) Page 1 of 3 REV:15.1 Page 2 of 3 REV:15.1 AD20 Series AC/DC CONVERTER 20W Efficiency up to 84% 3000VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastic case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AD20-S03 AD20-S05 AC(V) DC(V) Input 4000 4000 3.3 Universal Input :85 ~ 264VAC,50/60Hz AD20 Series AC/DC CONVERTER AD20-S09 AD20-S12 AD20-S15 AD20-S24 AD20-D05 +12 +15 AD20-D12 AD20-D15 85-264 120-370 +2000 2222 1667 1333 833 +833 +667 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms AD20-D05-05 AD20-D05-24 5/12 3000/400AD20-D05-12 5/24 3000/200 -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Recommend capacitive(uF) Page 1 of 2 REV:13.1 Page 2 of 2 REV:13.1 ADM20 Series AC/DC CONVERTER 20W Efficiency up to 81% 2500VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastc case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AC(V) DC(V) Input Universal Input :85 ~ 264VAC,50/60Hz ADM20 Series AC/DC CONVERTER ADM20-S12 ADM20-S15 ADM20-S24 +12 +15 ADM20-D12 ADM20-D15 85-264 120-370 1667 1333 833 +833 +667 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Platic Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Recommend capacitive(uF) Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 45.0 (1.77) 35.00 (1.37) 62.0(2.40) 10.0 (0.39) 54.0(2.13) 20.0 (0.79) 22.5(0.89) 6.10(0.24) 1.00 (0.04) Page 1 of 3 REV:15.1 Page 2 of 3 REV:15.1 AD25 Series AC/DC CONVERTER 25W Efficiency up to 84% 3000VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastic case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AD25-S03 AD25-S05 AC(V) DC(V) Input 5000 5000 3.3 Universal Input :85 ~ 264VAC,50/60Hz AD25 Series AC/DC CONVERTER AD25-S09 AD25-S12 AD25-S15 AD25-S24 AD25-D05 +12 +15 AD25-D12 AD25-D15 165-264 200-370+2500 2778 2083 1667 1042 +1042 +833 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms AD25-D05-05 AD25-D05-24 5/12 4000/400AD25-D05-12 5/24 4000/200 -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Recommend capacitive(uF) Page 1 of 2 REV:13.1 Page 2 of 2 REV:13.1 ADM25 Series AC/DC CONVERTER 25W Efficiency up to 85% 2500VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Metal case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output ADM25-S03M ADM25-S05M AC(V) DC(V) Input 5000 5000 3.3 Universal Input :85 ~ 264VAC,50/60Hz ADM25 Series AC/DC CONVERTER ADM25-S09M ADM25-S12M ADM25-S15M ADM25-S24M ADM25-D05M +12 +15 ADM25-D12M AD25M-D15M 85-264 120-370 +2500 2778 2083 1667 1042 +1042 +833 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms ADM25-D05-05M ADM25-D05-24M 5/12 4000/400ADM25-D05-12M 5/24 4000/200 -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Metal Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Recommend capacitive(uF) Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 45.0 (1.77) 35.00 (1.37) 62.0(2.40) 10.0 (0.39) 54.0(2.13) 20.0 (0.79) 22.5(0.89) 6.10(0.24) 1.00 (0.04) Page 1 of 3 REV:15.1 Page 2 of 3 REV:15.1 AD30 Series AC/DC CONVERTER 30W Efficiency up to 84% 3000VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastic case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AC(V) DC(V) Input Universal Input :85 ~ 264VAC,50/60Hz AD30 Series AC/DC CONVERTER Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Recommend capacitive(uF) AD30-S05 6000 AD30-S09 AD30-S12 AD30-S15 AD30-S24 AD30-D05 +12 +15 AD30-D12 AD30-D15 165-264 200-370 +3000 3333 2500 2000 1250 +1250 +1000 AD30-D05-05 AD30-D05-24 5/12 5000/400AD30-D05-12 5/24 5000/200 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. 研发中 研发中 Single/Double output eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU eR ICU www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com Lateral View Mechanical Dimension & Pin Connections Bottom View Model Selection Guide Order Code Recommend capacitive(uF) Efficiency(%) (Typ)Vo(V) Io(mA) Output AC(V) DC(V) Input ADM5-S03 ADM5-S05 1000 1000 3.3 ADM5-S09 ADM5-S12 ADM5-S15 ADM5-S24 ADM5-D05 +12 +15 ADM5-D12 ADM5-D15 85-264 120-370 +500 556 417 333 208 +208 +167 ADM5-D05-24 ADM5-D05-12 5/5 800/200ADM5-D05-05 5/12 800/100 330 330 220 220 220 100 Plastic case 20.5(0.81) 6.10(0.24) 1.00 (0.04) 36.0 (1.42) 25.00 (0.98) 48.5(1.91) 8.0 (0.315) 40.5(1.59) 16.0 (0.63) DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 Page 1 of 2 REV:13.1 Page 2 of 2 REV:13.1 AD50 Series AC/DC CONVERTER 50W Efficiency up to 80% 2500VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Metal case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AC(V) DC(V) Input Universal Input :85 ~ 264VAC,50/60Hz AD50 Series AC/DC CONVERTER Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Metal Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Recommend capacitive(uF) AD50-S05 10000 AD50-S09 AD50-S12 AD50-S15 AD50-S24 AD50-D05 +12 +15 AD50-D12 AD50-D15 165-264 200-370 +5000 5555 4167 3333 2083 +2083 +1667 Lateral View Mechanical Dimension & Pin Connections Bottom View 76.20 (3.00) 1.00(0.04) 76.20(3.00) 63.50(2.50) 10.16 (0.40) 20.32 (0.80) 20.32 (0.80) 40.64 (1.60) 20.00 (0.79) 4.60 (0.18) 3 4 10.16 (0.40) Note: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 +S TRIM-Vo -S 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com Note: “*” marked model is developing 1500 1200 1000 1000 1000 Page 1 of 3 REV:15.3 www.reicu.com E-mail:service @reicu.com Page 2 of 3 REV:15.3 ADN3 Series AC/DC CONVERTER 3W Efficiency up to 78% 3000VAC Isolation Single output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB mounting design Universal Input :85 ~ 264VAC,47～440Hz ADN3 Series AC/DC CONVERTER Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1 % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 120 Vp-pm Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. -25 +70 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material plastic eR ICU eR ICU www.reicu.com E-mail:service @reicu.com Model Selection Guide Order Code Recommend capacitive(uF) Efficiency(%) (Typ)Vo(V) Io(mA) Output AC(V) DC(V) Input ADN3-S03 ADN3-S05 500 500 3.3 ADN3-S09 ADN3-S12 ADN3-S15 85-264 120-370 333 250 200 330 330 220 220 220 Plastic case Application circuit 3 13 L N +Vo -Vo AC-DC CONVERTER + FUSE LOAD L N +Vo -Vo AC-DC CONVERTER + FUSE LOAD NTC MOV CY TVSC3 Lateral View Mechanical Dimension & Pin Connections Bottom View 22.86(0.90) 27.94(1.1) 15.24 (0.60) 20.30 (0.80) 31.80(1.25) 4.60 (0.18) 0.50(0.02) 31.80(1.25) 10.16 (0.40) 2 11 Note: Unit:mm(inch) NPL CS2 1 2 3Pin 11 Function NPCS1 13 14 24 +Vo -Vo N Page 3 of 3 REV:15.3 ADN3 Series AC/DC CONVERTEReR ICU www.reicu.com E-mail:service @reicu.com 3 13 N +Vo -Vo AC-DC CONVERTER + FUSE LOADBridge rectifiers CY C1:22uF 33uF/400V～ C2:Reference recommend capacitive C2:Reference recommend capacitive CY:2.2uF C1:4.7uF 6.8uF/400V～ C2:Reference recommend capacitive CY:2.2uF TVS:P6KE18A C3:104/50V C1:22uF 33uF/400V～ (3) (1) (2) L L:3.3-4.7uH(3.3V,5V,9V) 6.8-10uH(12V,15V) Page 1 of 2 REV:15.1 www.reicu.com E-mail:service @reicu.com Page 2 of 2 REV:15.1 ADM3_B Series AC/DC CONVERTER 3W Efficiency up to 76% 2500VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB mounting design Universal Input :85 ~ 264VAC,47～440Hz ADM3_B Series AC/DC CONVERTER Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 Safe Operating Area Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1 % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 150 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. -25 +70 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Case material Plastic eR ICU eR ICU www.reicu.com E-mail:service @reicu.com Lateral View Mechanical Dimension & Pin Connections Bottom View Model Selection Guide Order Code Recommend capacitive(uF) Efficiency(%) (Typ)Vo(V) Io(mA) Output AC(V) DC(V) Input ADM3-S03B ADM3-S05B 600 909 3.3 ADM3-S09B ADM3-S12B ADM3-S15B ADM3-S24B ADM3-D05B +12 +15 ADM3-D12B ADM3-D15B 85-264 120-370 +300 333 250 200 125 +125 +100 330 330 220 220 220 100 Plastic case Dual Note: Unit:mm(inch) NL +Vo 1 2 3Pin 4 Single NP-Vo NL +VoCOM-Vo 5.00(0.20) 18.00 (0.71) 0.80(0.03) 38.00 (1.496) 8.12 (0.32) 18.00 (0.71) 10.6 (0.42) 31.25 (1.23) 2 3 3 % +Vo -Vo With "*" products are being developed L N +Vo -Vo FG L N FG LCM Cy Cy Cx LOAD MOV MOV MOV FUSE NTC C1 C2 TVS R EMC recommended circuit 1. FUSEF I=3*Vo*Io/效率/ Vin Recommend： 2A/250V(10-30W) 2.NTC: 10D-09 3.MOV: 7D471K 4.LCM: 5-20mH/0.5A 5.Cx: 104/275VAC 6.Cy: 102/400VAC 7.C1: 104/50V 8.C2: Reference value for capacitor 9.TVS: P6KE20CA,SMBJ20CA AD20 Series AC/DC CONVERTEReR ICU Page 3 of 3 REV:15.1 www.reicu.com E-mail:service @reicu.com Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 48.0 (1.89) 40.0 (1.57) 70.0(2.76) 11.5 (0.45) 62.0(2.44) 23.0 (0.91) 23.5(0.93) 6.10(0.24) 1.00 (0.04) Case material Platic Safety level Single output Others Class II Class I 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 -40 Metal case Plastic case Input Voltage Derating Graph Curve Output Power(%) Input Voltage(VAC) 100 85 120 264 120 Ambient temperature 25℃ 285 Safe Operating Area Application circuit AC(L) AC(N) +Vo DC/DC Converter Cout Load Fuse AC(L) AC(N) +Vo1 -Vo1 DC/DC Converter Cout Load1Fuse +Vo2 -Vo2 Cout Load2 L N +Vo -Vo FG L N FG LCM Cy Cy Cx LOAD MOV MOV MOV FUSE NTC C1 C2 TVS R EMC recommended circuit 1. FUSEF I=3*Vo*Io/效率/ Vin Recommend： 2A/250V(10-30W) 2.NTC: 10D-09 3.MOV: 7D471K 4.LCM: 5-20mH/0.5A 5.Cx: 104/275VAC 6.Cy: 102/400VAC 7.C1: 104/50V 8.C2: Reference value for capacitor 9.TVS: P6KE20CA,SMBJ20CA AD25 Series AC/DC CONVERTEReR ICU Page 3 of 3 REV:15.1 www.reicu.com E-mail:service @reicu.com Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 48.0 (1.89) 40.0 (1.57) 70.0(2.76) 11.5 (0.45) 62.0(2.44) 23.0 (0.91) 23.5(0.93) 6.10(0.24) 1.00 (0.04) 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 -40 Metal case Plastic case Input Voltage Derating Graph Curve Output Power(%) Input Voltage(VAC) 100 85 120 264 120 Ambient temperature 25℃ 285 Safe Operating Area Application circuit AC(L) AC(N) +Vo DC/DC Converter Cout Load Fuse AC(L) AC(N) +Vo1 -Vo1 DC/DC Converter Cout Load1Fuse +Vo2 -Vo2 Cout Load2 Case material Platic Safety level Single output Others Class II Class I L N +Vo -Vo FG L N FG LCM Cy Cy Cx LOAD MOV MOV MOV FUSE NTC C1 C2 TVS R EMC recommended circuit 1. FUSEF I=3*Vo*Io/效率/ Vin Recommend： 2A/250V(10-30W) 2.NTC: 10D-09 3.MOV: 7D471K 4.LCM: 5-20mH/0.5A 5.Cx: 104/275VAC 6.Cy: 102/400VAC 7.C1: 104/50V 8.C2: Reference value for capacitor 9.TVS: P6KE20CA,SMBJ20CA AD30 Series AC/DC CONVERTEReR ICU Page 3 of 3 REV:15.1 www.reicu.com E-mail:service @reicu.com Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 48.0 (1.89) 40.0 (1.57) 70.0(2.76) 11.5 (0.45) 62.0(2.44) 23.0 (0.91) 23.5(0.93) 6.10(0.24) 1.00 (0.04) Case material Platic Safety level Single output Others Class II Class I 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 -40 Metal case Plastic case Input Voltage Derating Graph Curve Output Power(%) Input Voltage(VAC) 100 85 120 264 120 Ambient temperature 25℃ 285 Safe Operating Area Application circuit AC(L) AC(N) +Vo DC/DC Converter Cout Load Fuse AC(L) AC(N) +Vo1 -Vo1 DC/DC Converter Cout Load1Fuse +Vo2 -Vo2 Cout Load2 (Single output) )Double output) (Single output) )Double output) (Single output) )Double output) INPUT:85-264VAC .FG OUTPUT:5V/2000mA AC-DC CONVERTER 1515 ADM10-S05 GND. +Vo. INPUT:85-264VAC .FG OUTPUT:12V/1250mA AC-DC CONVERTER 1516 AD15-S12 GND. +Vo. INPUT:85-264VAC OUTPUT:12V/2500mA AC-DC CONVERTER 1520 AD30-S12 .FG GND. +Vo. INPUT:85-264VAC .FG OUTPUT:5V/1000mA AC-DC CONVERTER 1318 ADM5-S05 GND. +Vo. Page 1 of 3 REV:15.1 Page 2 of 3 REV:15.1 AD15 Series AC/DC CONVERTER 15W Efficiency up to 81% 3000VAC Isolation Single/Double output Wide temperature -25℃ to 70℃ short circuit protection Power modules for PCB Mounting mesign Plastic case Model Selection Guide Order Code Efficiency(%) (Typ)Vo(V) Io(mA) Output AD15-S03 AD15-S05 AC(V) DC(V) Input 3000 3000 3.3 Universal Input :85 ~ 264VAC,50/60Hz AD15 Series AC/DC CONVERTER AD15-S09 AD15-S12 AD15-S15 AD15-S24 AD15-D05 +12 +15 AD15-D12 AD15-D15 85-264 120-370 +1500 1667 1250 1000 625 +625 +500 Input Characteristics Min Typ Max UnitsParameter Condition AC DC 120 264 375 Hz Input Voltage Range Input Frequency AC 47 440 VAC VDC Output Characteristics Min Typ Max UnitsParameter Condition Output Voltage Accuracy 1% % Line regulation Vin(Min~Max) % Load regulation Ripple and noise 10%～100% load 20MHz 50 Vp-pm 100 Short circuit Protection Continuous,Automatic Recovery +0.5 +1 Transient Recovery Time 500 us25% Load Step Change +1+0.5 Hold-up time 50 ms AD15-D05-05 AD15-D05-24 5/12 2000/400AD15-D05-12 5/24 2000/200 -25 +85 -40 +105 MΩ500 2×105 Operating Temperature Case Storage Cooling Free air convection Input-Output 1mA≤1minuteIsolation voltage Isolation resistance MTBF Storage humidity %+95 K hours General Characteristics Min Typ Max UnitsParameter Condition 500VDC Recommend capacitive(uF) Lateral View Mechanical Dimension & Pin Connections Bottom View DualNote: Unit:mm(inch) NC N L +Vo 1 2 3Pin 4 Single 5 6 7 8 NP NP NP -Vo Dual Island NC N L NC N L +Vo NP COM -VoNP +Vo2 -Vo2 NP +Vo1 -Vo1 45.0 (1.77) 35.00 (1.38) 62.0(2.40) 10.0 (0.39) 54.0(2.13) 20.0 (0.79) 22.5(0.89) 6.10(0.24) 1.00 (0.04) 1000 1000 470 470 470 330 eR ICU eR ICU www.reicu.com E-mail:service @reicu.com www.reicu.com E-mail:service @reicu.com L N +Vo -Vo FG L N FG LCM Cy Cy Cx LOAD MOV MOV MOV FUSE NTC C1 C2 TVS R EMC recommended circuit 1. FUSEF I=3*Vo*Io/效率/ Vin Recommend： 2A/250V(10-30W) 2.NTC: 10D-09 3.MOV: 7D471K 4.LCM: 5-20mH/0.5A 5.Cx: 104/275VAC 6.Cy: 102/400VAC 7.C1: 104/50V 8.C2: Reference value for capacitor 9.TVS: P6KE20CA,SMBJ20CA AD15 Series AC/DC CONVERTEReR ICU Page 3 of 3 REV:15.1 www.reicu.com E-mail:service @reicu.com 2.O 3.Other input and output voltage may be available, please All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted. peration under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3.Ripple & Noise measurement bandwidth is 0-20MHz. .All AC/DC converters should be externally fused at the front end for protection. Temperature Derating Graph Curve Output Power(%) Operating Temperature(℃) 100 -25 0 25 7550 120 100 -40 Metal case Plastic case Input Voltage Derating Graph Curve Output Power(%) Input Voltage(VAC) 100 85 120 264 120 Ambient temperature 25℃ 285 Safe Operating Area Application circuit AC(L) AC(N) +Vo DC/DC Converter Cout Load Fuse AC(L) AC(N) +Vo1 -Vo1 DC/DC Converter Cout Load1Fuse +Vo2 -Vo2 Cout Load2 Case material Platic Safety level Single output Others Class II Class I (Single output) )Double output)