DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
of PCB layout due to smaller package sizes. during shipment, handling, and placement. are dust-free and compatible with a clean environment. workstations by trained personnel. reel is held with the round sprocket holes facing the observer. Figure 1. Direction of feed.
Table 1. Standard Package Tape and Reel (See Page 5 for Reel Definitions)
Table 1. Standard Package Tape and Reel (Continued) (See Page 5 for Reel Definitions) 1 For SOT-23 packages with greater than three leads, use the RJ designator. 2 Advantek part number Q14X14-HHX52.OP2 is the only approved carrier tape for this package. When boxing this reel, dunnage (crumpled kraft paper) shall be used between the reel. 3 For bumped die or WLCSP packages, see Table 2. Orientation for these devices is as per EIA783 (bumps facing bottom of carrier cavity; Pin 1 towards sprocket holes ). 4 Standard thickness for LFCSP is 0.85 mm, except when noted.
Table 2. WLCSP/Bumped Die Sales Tape and Reel 1 C-Pak part number 4205418-2/A (BD0090X0090) is the only approved carrier tape for the ADL5500 WLCSP . 2 Special carrier tapes exist for these products, where the required wafer thickness is 12 mil and the required spheres are 250 μm. Table 3. Small Quantity Reel 1 For SOT-23 packages prior to Rev. W, all products and lead counts use RT. For SOT-23 packages from Rev. W, all new products with greater than three leads use the RJ designator. 2 For actual WLCSP products available in small quantity reels, please cross reference with “7” reel (small quantity)” column of Table 2. This is a 7" reel. Quantities vary based on package size. This is a 13" reel. Quantities vary based on package size. forms like bare die, bumped chip, and WLCSPs.
www.analog.com Analog Devices, Inc. Worldwide Headquarters Analog Devices, Inc. One Technology Way P .O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113 Analog Devices, Inc. Europe Headquarters Analog Devices, Inc. Wilhelm-Wagenfeld-Str. 6
80807 Munich
Tel: 49.89.76903.0 Fax: 49.89.76903.157 Analog Devices, Inc. Japan Headquarters Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064 Analog Devices, Inc. Southeast Asia Headquarters Analog Devices 22/F One Corporate Avenue
222 Hu Bin Road
Shanghai, 200021 China Tel: 86.21.2320.8000 Fax: 86.21.2320.8222 ©2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. T03762-0-1/13(J) www.analog.com