AD10048P3L-001 EMERSON-NETWORKPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev. 11.07.08_125 AD10048P3L-001 1 of 2 Embedded Power for Business-Critical Continuity AD10048P3L-001
100 Watts
- Active power factor correction
- EN6100-3-2 compliant
- CE Mark EMC & LVD
- Universal ac input
- Fully regulated output
- Overcurrent, overvoltage and thermal protection
- Constant voltage
- High efficiency
- High MTBF
- IEC320 ac receptacle, 3 pin (type C6)
- Built in EMI filter
- (CISPR 22 Class B)
- AC Input fuse
- Complies with One Watt Input Energy Star / Blue Angel requirement
- POE isolation on output Total Power: 100 Watts Input Voltage: 90 - 264 Vac # of Outputs: Single Electrical Specifications Safety Input Input range: 90-264 Vac (wide range) Frequency: 47-63Hz Inrush current: 40 A maximum @ 264VAC, cold start 25 °C Input current: 1.8 A maximum Efficiency: 90% typical EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class-B Safety ground leakage current: 3.5 mA maximum @ 50/60 Hz, 264 VAC input Output Maximum Power (Po): 100 W Hold-up time: 10 ms. minimum at full load @ 115 Vac Overvoltage protection: 53 - 60 V Latching type, recycle ac to reset Overcurrent protection: Output short circuit protection auto recover Overload protection @ 110 - 120% above maximum rating Thermal protection: 105 °C to 120°C Trip point; output will latch off Cable/connector: DC cable length 2.5 mm center plug DC plug center +v DC plug outer -v UL UL 60950-1 CSA CSA-C22.2 no.60950-1 NEMKO EN/IEC60950-1 CB Certificate and report Operating temperature: 0 ° to + 45 °C ambient Storage temperature: - 40 °C to + 70 °C Electromagnetic susceptibility: Designed to meet EN61000-4-2, -4, -5, level 4; and EN61000-3-2 Class A Humidity: Operating; non-condensing 5% to 90% RH MTBF demonstrated: >300,000 hours at full load and 25 °C ambient conditions Environmental Specifications RoHS
Rev. 11.07.08_125 AD10048P3L-001 2 of 2 Embedded Power for Business-Critical Continuity Mechanical Drawing
Ordering Information
Load Peak Load1 Regulation2 Ripple P/P (PARD)3 AD10048P3L-001 100 W 48 Vdc 2.08 A 2.29 A ±5% <500 mV 1. Peak current lasting <4 seconds with a maximum 10% duty cycle. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 6.14″ (156.0) 2.56″ (65.0) LIVE NEUTRAL EARTH 1.46″ (37.2) 59″ (1500) 37.2mm (H) x 65.0 mm (W) x 156.0mm (L) AC Input Connector: IEC320, C6 AC Input power cord sold separately Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” (±0.5mm) 3. Warranty: 2 year 4. Weight: 1.11 lb./ 0.5 kg 5. AC input power cord sold separately. 6. Specifications at factory settings at 115 Vac input, 25 °C unless otherwise stated Americas
5810 Van Allen Way
Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. EmersonNetworkPower.com Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power