ACW4 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

Applications

  • With its two-part design, the ACW4 absolute single-turn offers maximum flexibility for installation
  • Rugged and excellent resistance to shock and vibration
  • Robust, proven magnetic technology
  • Environmentally resistant, IP 67 standard (IP69K option)
  • Extended operating range from -40° C to 85° C
  • Uses universal supply 5 to 30 VDC – Analog output
  • Available Resolution up to 12 bits per revolution
  • Variety of magnet holders available
  • Factory Automation
  • Process Automation Terminations PVC cable Housing Macromelt PA638 Weight 0,150 kg Mechanical Electrical Angle 360° Output Function 0– 10 Vdc, 0.5 to 4.5 Vdc, or 4 – 20 mA Minimal Cycle Time 1ms Resolution Single –turn, 12 bits Accuracy +/-0.3% on 360° Repeatability +/-0.1% on 360° Supply Voltage 5Vdc, 11 to 30 Vdc, or 15 to 30 Vdc Start-up < 1s Response time < 10 ms (5L2 and 3L1 electronics), <1ms (All other electronics) Recommended Load > 10 kOhms (voltage out), 500 Ohms (current out) Current Requirements < 40mA Protection Overvoltage Protection: Yes Reverse Polarity Protection: Yes Short Circuit Protection: Yes EMC IEC 61000-4-2 Electrostatic discharge (ESD) 4 kV, 8 kV IEC 61000-4-3 Electromagnetic fields 10 V/m (80MHz - 1GHz), 3V/m (1.4GHz - 2GHz), 1V/m (2GHz - 2.7GHz) IEC 61000-4-6 Conducted disturbances, induced by RF-fields 10 Veff. Electrical Sensata-BEI Sensors' ACW4 sensors provide absolute single turn measurement with an analog output in an over-molded, modular design that offers flexibility and protection from the environment.

www.sensata.com Page 2 Copyright © 2020 Sensata Technologies, Inc. Analog Output All Dimensions are in millimeters. Shaft system with magnet to be ordered separately (see Accessories). DIMENSIONS 2 Ø 4 H10 30 15,5 Clockwise direction A 0.5 to 3.5mm Advised mounting condition <1° Advised mounting condition (magnet sold separately) 8,6 jn 1A Maximum Range +/-180 degrees Minimum Range +/-15 degrees Output Low Output High Output 50%

www.sensata.com Page 3 Copyright © 2020 Sensata Technologies, Inc. CONNECTIONS NOTES Stray magnetic fields can interfere with accuracy and repeatability of the signal. Funtion Vcc 0V Analog Out Ground Color Brown BN White WH Green GN Shield ORDERING OPTIONS Example : ACW4_00//3L11//00360//L3R020 (Contact the factory for special versions, ex : dimensions, connections... ) Family ACW4: Absolute Single-Turn Sensor Shaft Ø 00: Modular Supply 3L1: 15 to 30 Vdc, 0-10V Output 5L2: 11 to 30 Vdc, 0.5 - 4.5 V Output 3L3: 15 to 30 Vdc, 4 – 20 mA Output 2LR: 5Vdc +/- 5%, Ratiometric 10 – 90% of Vcc Direction 1: CW, Clockwise positive 2: CCW, Counterclockwise positive Range 00360: 360° range Connection L3: 3 conductor PVC cable Connection Orientation R020: Radial cable 2m long ACW4 _ 00 // 3L1 1 // 00360 // L3 R020

www.sensata.com Page 4 Copyright © 2020 Sensata Technologies, Inc. ACCESSORIES KXX: Where XX is the shaft mounting diameter in mm. Standards are 06, 08, 10, 11, and 14 mm. i.e M9105/K10 mounts to a 10 mm shaft. V 0,5 A A Y Z X H7 W SECTION A-A 12,5

3 H10

M9105/K06 M9105/K08 M9105/K10 M9105/K11 M9105/K14 X 06 H7 08 H7 10 H7 11 H7 14 H7 V 20 20 26 26 29 W 9,3 9,3 10 10 10 Y 12,5 12,5 14 14 14 Z 15 15 15 15 18

www.sensata.comCopyright © 2020 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. No. 02312-001 Rev.05/04/20 CONTACT US Americas +1 (800) 350 2727 sales.beisensors@sensata.com EMEA position-info.eu@sensata.com +33 (3) 88 20 8080 Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 10 g7 50% of output signal visual mark 10±0.10 2.50±0.10