ACUDIAL-BNCTNC MINI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Mini-Circuits’ ACUDIAL-BNCTNC Series connector gage kit is a push on type gage designed to measure the center contact pin and dielectric location of type BNC and TNC female and male connectors per MIL-PRF-39012 class 2. The ACUDIAL-BNCTNC Gage kit consists of: (1) a dial indicator assembly graduated in 0.001 increments with integral female and male measurement bushings. (2) female and male master gage (3) calibration certificate* (4) Instruction manual all contained in a solid wooden instru- ment case (12 x 7 x 3.5 inches) Before checking the interface dimensions of any connector the dial indicator is set to zero by means of a master gage. After zeroing , the connector is engaged on the on the male or female bushing of the gage depending upon the gender of connector The resultant reading is the actual deviation from the nominal (mean) dimension as indicated in following table 1.
- Direct reading
- Quick startup
- Self-Calibration
- Dial Indication
- Accurate
- Easy to Use Application All the coaxial connectors mounted on device cables or any test equipment should always be gaged before mating to in - sure compliance. Such check helps in averting interfered mat- ting and to assure proper electrical performance and produce accurate test data and preventing damage to the device being tested. The ACUDIAL-BNCTNC Gage kit is the right tool for all of these situations, and can also be used for performing produc- tion checkout, incoming inspections, routine quality control, and general laboratory operations. Compliance
- Per ASME B89.1.10M-2001, C5.12
- Per ASME B89.1.10M-2001, Table 3
- Performance standards are in compliance with ANSI/NCSL Z540-1 and iso 10012-1 ACUDIAL-BNCTNCBNC-TNC Connector Gage Kit Calibration Solutions REV. A M167359 ACUDIAL-BNCTNC DB/CP 180418 *Recommended duration of calibration is one year. However to ensure that the performance of gage and its accessories are in accordance to factory calibrated standards, actual need of calibration may vary based on use.
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. Table 1. Contact Pin Location for BNC/TNC Connectors Table 2. Gage Dimensions Female Table 3. Gage Dimensions Male