DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Tel 0044(0)118 979 1238 Fax: 0044(0)118 979 1283 email: info@act crystals.com
- Stability: ±0.28ppm (-40 ~ +85°C)
- Accuracy: ±1.0 ppm (25°C at time of shipment)
- Aging ±4.6ppm 10years, ±0.7ppm 1st year (25°C)
- Developed freq 10, 12.8, 19.2, 20 & 26MHz Characteristics Frequency Range (MHz) 10 ~ 40 Supply voltage ±5% Vcc (VDC) 3.3±5% Operating temperature Top (°C -40 ~ +85 Stabilty v T op (ppm) ±0.28 Stabilty v Vcc(ppm) ±0.2 Stabilty v Load (ppm) ±0.2 Aging @25°C (ppm) ±4.6 (10yr) ±0.7 (1st yr) Tolerance @ 25°C (ppm) ±1.0 Load ±10% 15pF±10% LVCMOS Output voltage VOH >3V, VOL >0.3V Duty Cycle 45/55% AFC ( Voltage control) Available (Enquire) Phase Noise (dBc/Hz) 10Hz 10MHz 25°C 100Hz 1kHz 10kHz 100kHz Rating Storage temperature (°C) -50 ~ +95 Humidity (%RH) 5 ~ 90 Air Pressure (kPa) 70 ~ 106 ESD Sensitive, take precautions. Vibration IEC60068-2-6 Fc 10~55Hz sine 0.75mm, 1.5hr, X,Y & Z Shock IEC60068-2-27Fc 100g ½ sine 3 bump, X, Y & Z Marking: wy: week/year Tape & Reel Standard reel: 1K Issue No. Date:1 T3 29/08/2013
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY
For quotations or further information please contact us at: ISO9001 Registered To specify: Please refer to part numbering system appended to the end of this data Please note that all parameters can not necessarily be specified in the same device. ACT SMPT7 Stratum 3 TCXO SMPT7 -S3 -110 -135 -75 -145 -145
Tel 0044(0)118 979 1238 Fax: 0044(0)118 979 1283 email: info@act crystals.com ACT SMPT7 Stratum 3 TCXO W B I N E X X H -PF SMPT7 ±0.28 3.3 None None Pos 45/55 ppm VDC °C HCMOS % RoHS SMPT7 T97 Stability TOP °C TCXO v TOP -40 +85 I Polarity ±ppm None X 0.28 W Duty Cycle VCC VDC Frequency % / %
3.3 B tuning H
Tape & Reel C Mechanical L Tuning ±ppm X T97 - 2000WBINEXXHC-PF 20MHz Issue No. Date:
1 T3 29/08/2013
Please note that all parameters can not necessarily be specified in the same device. To specify: Please refer to part numbering system appended to the end of this data ISO9001 Registered -40 +85 T97 2000 20.00MHz 1000 Loose 1000 C For quotations or further information please contact us at: None Frequency: Please enquire if the frequency/stability combination has been developed. For part numbering use the first 4 characters of the frequency in Hz ie 27MHz = 27000000Hz so the code used in the part number is 2700. If the frequency is 100MHz or higher then the first 5 characters are used. It is important to suffix the part number