ACTS161MS INTERSIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Devices QML Qualified in Accordance with MIL-PRF-38535
  • Detailed Electrical and Screening Requirements are Contained in SMD# 5962-96716 and Intersil’s QM Plan
  • 1.25 Micron Radiation Hardened SOS CMOS
  • Single Event Upset (SEU) Immunity: <1 x 10 -10 Errors/Bit/Day (Typ)
  • Latch-Up Free Under Any Conditions oC to +125oC
  • Significant Power Reduction Compared to ALSTTL Logic
  • Input Logic Levels - VIL = 0.8V Max - VIH = VCC/2 Min
  • Input Current≤ 1µA at VOL, VOH

Description

The Intersil ACTS161MS is a Radiation Hardened 4-Bit Binary Synchronous Counter, featuring asynchronous reset and load ahead carry logic. TheMR is an active low master reset.SPE is an active low Synchronous Parallel Enable which disables counting and allows data at the preset inputs (P0 - P3) to load the counter. CP is the positive edge clock. TC is the terminal count or carry output. Both TE and PE must be high for counting to occur, but are irrelevant to loading. TE low will keep TC low. The ACTS161MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of a radiation hardened, high-speed, CMOS/SOS Logic family. The ACTS161MS is supplied in a 16 lead Ceramic Flatpack (K suffix) or a Ceramic Dual-In-Line Package (D suffix). Spec Number 518893 File Number 4095

MR CP PE TE SPE P N Q N TC Reset (Clear) L X X X X X L L Parallel Load H X X I I L L H X X I h H (Note 1) Count H h h h (Note 3) X count (Note 1) Inhibit H X I (Note 2) X h (Note 3) X q N (Note 1) H X X I (Note 2) h (Note 3) X q N L H = High Steady State, L = Low Steady State, h = High voltage level one setup time prior to the Low-to-High clock transition, I = Low volt- age level one setup time prior to the Low-to-High clock transition, X = Don’t Care,q = Lower case letters indicate the state of the referenced output prior to the Low-to-High clock transition, = Low-to-High Transition. NOTES: 1. The TC output is High when TE is High and the counter is at Terminal Count (HHHH). 2. The High-to-Low transition of PE or TE should only occur while CP is High for conventional operation. 3. The Low-to-High transition of SPE should only occur while CP is High for conventional operation. CP MR PD 3 TC TE CP MR PD 2 CP MR PD 1 MR Q1 CP MR PD 0 Q0 GND SPE CP TE PE TE Q3Q2Q1Q0 Spec Number 518893

DIE DIMENSIONS: 88 mils x 88 mils 2240mm x 2240mm METALLIZATION: Type: AlSi Metal 1 Thickness: 7.125k Å ±1.125kÅ Metal 2 Thickness: 9kÅ ±1kÅ GLASSIVATION: Type: SiO2 Thickness: 8kÅ ±1kÅ WORST CASE CURRENT DENSITY: < 2.0 x 105A/cm2 BOND PAD SIZE: 110µm x 110µm 4.3 mils x 4.3 mils Metallization Mask Layout ACTS161MS MR VCC TC (1) (16) (15) CP (2) P0 (3) P1 (4) P2 (5) P3 (6) (8)(7) (9) PE GND SPE (10) TE (14) Q0 (13) Q1 (12) Q2 (11) Q3 Spec Number 518893

All Intersil semiconductor products are manufactured, assembled and tested underISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web sitehttp://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee

1130 Brussels, Belgium

TEL: (32) 2.724.2111 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 ACTS161MS Spec Number