DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

7-865.0-QCC8C SAW Filter :Features  Low-loss Bandpass filter.  Ceramic Package for Surface Mounted Technology (SMT)  Lead-free Production and RoHS Compliance Package Dimensions Pin Configuration

2 Input / Output

6 Output / Input

Sign Data (unit: mm) Sign Data (unit: mm) A 1.00 D 1.50 B 1.27 E 3.80 C 0.60 F 3.80 Marking ACTF 8137 Top View, Laser Marking "ACT”: Manufacturer’s mark “F”: SAW filter “8137”: Part number Matching Configuration(single ended---- single ended)

Operating Temperature Range TA -40 ~ +85 °C Storage Temperature Range Tstg -40 ~ +85 °C

Electrical Characteristics

Reference temperature: TA = 2 5 ℃ Terminating source impedance: ZS = 50 © Terminating load impedance: ZL = 50 © Characteristic Min. Typ. Max. Unit Center frequency fC — 865.0 — MHz Insertion attenuation IL — 10.3 13.0 dB Pass band Ripple (863.8MHz~866.2MHz) Pr 0.3 1.0 dB Group delay Ripple (863.75MHz~866.25MHz) Gr 60 200 ns 1 dB Bandwidth B1dB 3.0 3.3 MHz 3 dB Bandwidth B3dB 3.6 MHz 20 dB Bandwidth B20dB 5.9 6.5 MHz Absolute attenuation

10 MHz ~840 MHz

dB 900 MHz ~1000 MHz 30 40 RoHS Compliant Electrostatic Sensitive Device

Typical Frequency Response

Environmental Characteristics Test item Condition of test Requirements

1 Mechanical

(a) Drops: 3 times on concrete floor (b) Height: 1.0m The SAW filter shall remain within the electrical specifications after tests.

2 Vibration

(a) Frequency of vibration: 10~55Hz (b) Amplitude: 1.5mm (c) Directions: X,Y and Z (d ) Duration: 2 hours

3 Moisture

(a) Condition: 40°C, 90~95% R.H. (b) Dur ation: 96 hours (c) Wait 4 hours before measurement

4 Climatic

(a) +70℃ for 16 hours (b) +55℃ for 24 hours, 90~95% R.H. (c) -25℃ for 2 hours (d) +40℃ for 24 hours, 90~95% R.H. (e) Wait 4 hours before measurement High Temperature Exposure (a) Temperature: 70°C (b) Duration: 250 hours (c) Wait 4 hours before measurement

6 Thermal impact (a) +70°C for 30 minutes ⇒ -25°C for 30 minutes repeated 3 times

(b) Wait 4 hours before measurement Remarks 8-1 Static voltage Static voltage between signal load & ground may cause deterioration & destruction of the SAW filter. Please avoid static voltage. 8-2 Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the SAW filter. Please avoid ultrasonic cleaning. 8-3 Soldering Only terminals of the SAW filter may be soldered. Please avoid soldering other parts of the SAW filter. Soldering Profile