ACT132SMX ACT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Parameter Symbol Specification Frequency Range fo 32.768KHz Frequency Tolerance Δf/fo ±20, ±30, ±50, ±100ppm Please specify Frequency v Temperature Δf/fo See Drawing Turnover Temperature Tp +25°C ±5°C Temp. Coefficient K -3.5 x 10 -8/°C2 Temp Operating Range Tope -40 ~+85°C Temp Storage Range Tsto -55 ~ +125°C Equivalent Series Resistance ESR 55K Ω max Shunt Capacitance C0 0.9pF typical Motional Capacitance C1 2.3fF typical Load Capacitance CL 12.5pF Please refer to note 1 Maximum Drive Level DL 1 μ W recommended Drive Level DL max 0.1μ W Aging Fa ±5ppm max 25°C ±3°C, first year Reflow Profile Tsol See diagram: page 4 For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

http://www.actcrystals.com Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Operating Temperature Range, Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : info@actcrystals.com ACT132SMX Condition The ACT132SMX is a low height, plastic moulded package incorporating a cylinder type crystal. It is ideally suitable for automatic insertion, especially where high density surface mounting is needed. It has excellent shock and heat resistant properties. Applications include Radio Communications Equipment, Pagers, Cellular Phones, portable applications and a variety of clock sources. Specification Issue : 5 A3 Date :26/7/0 Note 1 A 7pF load capacitance device is available but at present this device is not RoHS compatible. The reflow profile for this device is available on request. Lead Free-RoHS comp. Pad Surface Material SnBi 0.007-0.012mm A solder containing >85% Lead as an inapplicability substance is used on an internal terminal. Exempt under the RoHS legislation (1000ppm Pb) 1.8 2.0 max 2.6 0.4 5.08 4.3 max 7.3 max 3.88 1.3 1.2 2.4 Suggested FootprintDimensions in mm #1 #2 #3#4 1 of 4

Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : info@actcrystals.com ACT132SMX TAPE AND REELING

3.000 PIECE REELS

ORIENTATION IN CARRIER TAPE LAYOUT OF TAPE No Components 20 Pockets Minimum Cover Tape Leader 400mm Minimum Start of carrier tape bent vertically and hooked into reel slot. COVER TAPE OVERLAP In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: http://www.actcrystals.com Issue : 5 A3 Date :26/7/0 2 of 4

Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : info@actcrystals.com ACT132SMX TAPE & REELING SPECIFICATION cont'd PEEL STRENGTH Using method below the force to start the tape peeling with a pull speed of 300±10 mm/min shall be 0.1~1.3N. REEL DIMENSIONS (mm) ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice http://www.actcrystals.com Issue : 5 A3 Date :26/7/0 3 of 4

Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : info@actcrystals.com ACT132SMX TAPE & REELING SPECIFICATION cont'd CARRIER TAPE DIMENSIONS (mm) ACT132SMX REFLOW SOLDERING PROFILE http://www.actcrystals.com In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: Issue : 5 A3 Date :26/7/0 4 of 4