ACT1100HS

ACT1100HS ACT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

ACT1100HS / ACT1700HS HCMOS/TTL Clock Oscillators Parameter Symbol 20kHz~80kHz & 250kHz~160MHz Frequency Stability Δf/fo ±10ppm, ±25ppm, ±50ppm and ±100ppm Temp Operating Range Topr -0 ~ +70°C to -40 ~ +85 °C Temp Storage Range Tstg -50~100°C Supply Voltage V DD 3.3Vdc ±10%, 5.0Vdc ±10% Supply Current Iop 15mA max 25mA max 16.5mA max 35mA max 35mA max 40 mA max 50mA max 50mA max 40/60% TTL 40/60% HCMOS Output Level ‘0’ VOL TTL 0.4V max, HCMOS V DD X 0.1 max Output Level ‘1’ VOH TTL 2.4V min, HCMOS VDD-(VDD X 0.1) min Output Logic TTL / HCMOS Output Load TTL 2 ~ 10 Gates CMOS 15 or 50pF Measured between 0.4V ~ 2.4V (RL = 390 Ω ; CL = 15pF) Measured between 10%~ 90% VDD (CL = 15pF) Start-up Time 10mSec max, 5ms typical Output is low impedance when >0.8V is applied to pin 1. Disable time is 150nSec max Aging ±5ppm / year max Period Jitter (Absolute) 25~43pS Dependent on frequency ACT1100HS Part Number Prefix 'HS' ACT1700HS Part Number Prefix 'HL' Issue 5 M6 ISO9001:2000 Registered For quotations or further information please contact us a

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, U

http://www.actcrystals.com Date: 3/4/6 20kHz - 32MHz Fax : 0044 (0)118 979 1283 Rise & Fall Time tr/tf Option on Pin 1 Frequency Range fo Duty Cycle TW/t Please specify 125MHz - 160MHz @25°C Tel : 0044 (0)118 979 1238 email : info@actcrystals.com Condition Specification Please specify Please specify Please specify The ACT1100HS/ACT1700HS series are popular full/half size DIL oscillators that allow for stabilities of ±10ppm, frequencies <500kHz & >125MHz.These devices offer a good cost ratio performance for many consumer applications. For stabilities >±10ppm and frequencies 500kHz~125MHz please refer to the standard ACT1100 & ACT1700 series. Specification TTL 10nSec max, 3nSec typical 32MHz - 50MHz 50MHz - 125MHz Please specify Measured at +1.4Volts Measured at 50% VDD Please specify CMOS 10nSec max, 3nSec typical Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Stability, Operating Temperature Range, Supply Voltage, Duty Cycle, Output Enable (Tristate) If required In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice Plating Material on leads 98-99%Sn 1 of 2

ACT1100HS / ACT1700HS HCMOS/TTL Clock Oscillators Application circuits Issue 5 M6 http://www.actcrystals.com In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

Fax : 0044 (0)118 979 1283 email : info@actcrystals.com Date: 3/4/6 Tel : 0044 (0)118 979 1238 2 of 2