ACT11008

74ACT11008 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

QUADRUPLE 2-INPUT POSITIVE-AND GATE SCAS013C – AUGUST 1987 – REVISED APRIL 1996 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Inputs Are TTL-Voltage Compatible /C0068Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise /C0068EPIC  (Enhanced-Performance Implanted CMOS) 1-/C0109m Process /C0068500-mA Typical Latch-Up Immunity at 125°C /C0068Package Options Include Plastic Small-Outline (D), Plastic Thin Shrink Small-Outline (PW), and Standard Plastic 300-mil DIPs (N) Packages

description

The 74ACT11008 contains four independent 2-input AND gates. It performs the Boolean function Y = A/C0083B or Y /C0043A /C0041B in positive logic. The 74ACT11008 is characterized for operation from –40°C to 85°C. FUNCTION TABLE (each gate) INPUTS OUTPUT A B Y H H H L XL X L L logic symbol† † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 1A & logic diagram (positive logic) GND GND V CC VCC (TOP VIEW) D, N, OR PW PACKAGE Copyright  1996, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. EPIC is a trademark of Texas Instruments Incorporated. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

QUADRUPLE 2-INPUT POSITIVE-AND GATE SCAS013C – AUGUST 1987 – REVISED APRIL 1996

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The maximum package power dissipation is calculated using a junction temperature of 150/C0095C and a board trace length of 750 mils, except for the N package, which has a trace length of zero. recommended operating conditions MIN MAX UNIT VCC Supply voltage 4.5 5.5 V VIH High-level input voltage 2 V VIL Low-level input voltage 0.8 V VI Input voltage 0 VCC V VO Output voltage 0 VCC V IOH High-level output current –24 mA IOL Low-level output current 24 mA /C0068t//C0068v Input transition rise or fall rate 0 10 ns/V TA Operating free-air temperature –40 85 °C

QUADRUPLE 2-INPUT POSITIVE-AND GATE SCAS013C – AUGUST 1987 – REVISED APRIL 1996 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC TA = 25°C MIN MAX UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN MAX UNIT IOH =5 0 /C0109A 4.5 V 4.4 4.4 VOH IOH = –50 /C0109A 5.5 V 5.4 5.4 VVOH IOH =2 4 m A 4.5 V 3.94 3.7 V IOH = –24 mA 5.5 V 4.94 4.7 IOL =5 0/C0109A 4.5 V 0.1 0.1 VOL IOL = 50 /C0109A 5.5 V 0.1 0.1 VVOL IOL =2 4m A 4.5 V 0.36 0.44 V IOL = 24 mA 5.5 V 0.36 0.44 IOH † VO = 3.85 V 5.5 V –75 mA IOL † VO = 1.65 V 5.5 V 75 mA II VI = VCC or GND 5.5 V ±0.1 ±1 /C0109A ICC VI = VCC or GND, IO = 0 5.5 V 4 40 /C0109A /C0068ICC ‡ One input at 3.4 V, 55V 09 1 mA/C0068ICC ‡ , Other inputs at GND or VCC 5.5 V 0.9 1 mA C i VI = VCC or GND 5 V 3.5 pF † Not more than one output should be tested at a time, and the duration of the test should not exceed 1 second. ‡ This is the increase in supply current for each input that is at one of the specified TTL voltage levels rather than 0 or VCC . switching characteristics over recommended ranges of supply voltage and free-air temperature (unless otherwise noted) (see Figure 1) PARAMETER FROM TO TA = 25°C MIN MAX UNITPARAMETER (INPUT) (OUTPUT) MIN TYP MAX MIN MAX UNIT tPLH Ao rB Y 1.5 5.8 8 1.5 9 nstPHL A or B Y ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT C pd Power dissipation capacitance per gate C L = 50 pF, f = 1 MHz29 pF

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

NOTES: A. C L includes probe and jig capacitance. B. Input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 W , tr = 3 ns, tf = 3 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright  1998, Texas Instruments Incorporated