ACSC56-41SURKWA-F01_15 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
z 0.56 inch digit height. z Low current operation. z Excellent character appearance. z Mechanically rugged. z Gray face,white segment. z Package: 400pcs/ reel. z Moisture sensitivity level : level 2a. z RoHS compliant.
Description
The Hyper Red source color devices are made with Al- GaInP on GaAs substrate Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm
SPEC NO: DSAG0302 REV NO: V.10A DATE: JAN/08/2015 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1351000389 Selection Guide Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Description Min. Typ. Hyper Red (AlGaInP) White Diffused 21000 44000 Common Cathode, Rt. Hand Decimal. *5600 *14000 ACSC56-41SURKWA-F01 Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red 645 nm I F=20mA λD [1] Dominant Wavelength Hyper Red 630 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red 28 nm I F=20mA C Capacitance Hyper Red 35 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V I F=20mA IR Reverse Current Hyper Red 10 uA V R=5V Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG0302 REV NO: V.10A DATE: JAN/08/2015 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1351000389 Hyper Red ACSC56-41SURKWA-F01
SPEC NO: DSAG0302 REV NO: V.10A DATE: JAN/08/2015 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1351000389 ACSC56-41SURKWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm)
SPEC NO: DSAG0302 REV NO: V.10A DATE: JAN/08/2015 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1351000389 PACKING & LABEL SPECIFICATIONS ACSC56-41SURKWA-F01 Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes