ACS108-6S_0606 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Transient voltage protected AC Switch (ACS™) Main product characteristics ■ Overvoltage protection by crowbar technology ■ High noise immunity - static dV/dt > 500 V/µs
Applications
■ AC ON/OFF static switching in appliances and industrial control systems ■ Drive of low power high inductive or resistive loads like: – relay, valve, solenoid, – dispenser, door lock – pump, fan, micro-motor Benefits ■ Needs no external protection snubber or varistor. ■ Enables equipment to meet IEC 61000-4-5. ■ Reduces component count by up to 80%. ■ Interfaces directly with the micro-controller. ■ Common package tab connection supports connection of several alternating current switches (ACS) on the same cooling pad. ■ Integrated structure based on ASD(a) technology Order code
Description
The ACS108-6S belongs to the AC line switch family. This high performance switch can control a load of up to 0.8A. The ACS108-6S switch includes an overvoltage crowbar structure to absorb the overvoltage energy, and a gate level shifter driver to separate the digital controller from the main switch. It is triggered with a negative gate current flowing out of the gate pin. Functional diagram TM: ACS is a trademark of STMicroelectronics IT(RMS) 0.8 A VDRM/VRRM 600 V IGT 10 mA a. ASD: Application Specific Devices Part number Marking ACS108-6SA ACS1086S ACS108-6SA-TR ACS1086S ACS108-6SA-AP ACS1086S ACS108-6SN-TR ACS1086S COM Common drive reference to connect to the mains OUT Output to connect to the load. G Gate input to connect to the controller through gate resistor COM OUT G COM OUT COM G SOT-223 ACS108-6SN TO-92 ACS108-6SA OUT COM G
1 Characteristics
Table 1. Absolute maximum ratings (T amb = 25 °C, unless otherwise specified)
- according to test described by IEC 61000-4-5 standard and Figure 16
Table 2. Electrical characteristics (T j = 25 °C, unless otherwise specified)
- minimum I GT is guaranteed at 10% of IGT max
- for both polarities of OUT referenced to COM
2 AC line switch - basic application
The ACS108-6S switch is triggered by a negative gate current flowing from the gate pin G. Figure 13. Typical application program
2.1 Protection against overvoltage: the best choice is ACS
voltage that can occur on the electrical network.
2.1.1 High induc tive load switch-off: turn-off overvoltage clamping
energy has been dissipated, the ACS voltage falls back to the mains voltage value (5).
2.1.2 AC line transient voltage ruggedness
is also used to test the ACS switch according to the IEC 61000-4-5 standard conditions. next zero crossing of the current). Such non-repetitive tests can be done 10 times on each AC line voltage polarity. Figure 14. Effect of the switching off of a high Figure 15. Description of the different steps Figure 16. Overvoltage ruggedness test circuit Figure 17. Typical current and voltage
3 Ordering information scheme
4 Package information
Table 5. TO-92 Mechanical data
Figure 18. SOT-223 Footprint conditions are also marked on the inner box label. ECOP ACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Table 6. SOT-223 Mechanical data
5 Ordering information
6 Revision history
Part number Marking Package Weight Base Qty Packing mode ACS108-6SA ACS1086S TO-92 0.2 g 2500 Bulk ACS108-6SA-TR ACS1086S TO-92 0.2 g 2000 Tape and Reel ACS108-6SA-AP ACS1086S TO-92 0.2 g 2000 Ammopack ACS108-6SN-TR ACS1086S SOT -223 0.11 g 1000 Tape & reel Date Revision Changes 05-Jan-2005 1 Initial release. 07-Jun-2006 2 Reformatted to current standard. Replaced Figure 9.