ACRMS02

Amphenol Corporation

MS & 97B - Series

Manufacturer: Amphenol Corporation

Document: 56 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Amphenol Corporation Browse A parts

Online Datasheet

Read ACRMS02 online.

MS3106B20-15P AMPHENOL | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 56

Technical content

MS & 97B - Series ACRMS02 0313

I ntroduction & Page Contents Page Introduction Amphenol MS & 97B series are two series of thread & Bayonet coupled connectors designed to meet the operating requirements of MIL-C-5015. available in a variety of styles & classes, these connectors are primarily used in a range of military and industrial applications where specific degrees of environmental protection are required. Although MS series have identical insert arrangements and other similar components parts, the two series differ in that Amphenol MS series of connectors are also qualified to meet the operating requirements of Defence Standard Joint Services Specifications JSS50812, issued by the Electronics Components Standardization Organisation (LCSO) Amphenol 97B connectors feature a quick a mating bayonet coupling with an audible full mating feature. This series uses the same MIL-C-5015 insert patterns and are used in high shock and vibration environments encountered in commercial, geophysical, aerospace, ground support and shipboard applications. Content Introduction Connector style General description Electrical data Insert orientations Insert arrangements MS threaded series connector 97B reverse bayonet connector

Ordering information

Class A=R Class A Class E and F Class R cable clamp back shell MS-3102 MS-4102 MS-3101 MS-4101 MS-3100 MS-4100 MS-3106 MS-4106 MS-3108 MS-4108 grommet sleeve grommet C onnector Styles

Class A=R Class A Class R cable clamp back shell grommet sleeve grommet Class F 97B - 3108 97B - 4108 97B - 3106 97B - 4106 97B - 3102 97B - 4102 97B - 3100 97B - 4100 97B - 3101 97B - 4101 97B - 3103 97B - 4103 C onnector Styles

These electrical connectors are designated MS because the interchangeability and operating characteristics are determined by U.S. Military Specifications. These specifications are revised from time to time to incorporate performance requirements dictated by design advances and more stringent requirements of allied equipment. The several designations of MS and 97B connectors meet different requirements of MIL- C-5015. These designations and general descriptions are as follows : Shell Shell constructions include solid back shell (A) and environmental resistant (E, F & R). Environmental resistant connectors provide a moisture barrier and assure a positive seal. Shell styles consist of wall type receptacles (3100), cable receptacles (3101), box receptacles (3102), straight plugs (3106) and angle plugs (3108). Shell hardware is manufactured from aluminium alloy and cadmium plated with olive drab chromate finish. This finish has excellent conductivity; it is non-reflecting and corrosion resistant. Black anodised finish and cadmium- free zinc plating with olive drab chromate finish are also available. For details, contact factory. Contacts Pin and socket contacts are of brass and generally silver plated. Gold plating is also available. For details contact factory. These contacts are available for solder or crimp termination. Special arrangements of contacts for pre-mating and pre-earth are also available. Inserts and grommet Synthetic inserts and grommet manufactured according to MIL-R-3065, offer high dielectric strength and are resistant to oils, gasoline and low temperature. DAP is dimensionally stable, has high arc resistance and high insulation resistance under both humidity and thermal stress. General description Plugs are available in A, F and R types. Receptacles are available in A, E, F and R types. A Solid back shell Intended for general service usage to provide convenient means of connecting and disconnecting electrical circuits in industrial and military applications. Environmental resisting Intended for use where the connector will be subject to heavy condensation and rapid changes in temperature or pressure and/or where the connector is subjected to high vibratory conditions. E Environmental resisting with grommet seal and strain relief backshell except for 3102 type. F Environmental resisting with grommet seal, strain relief backshell and front gasket seal for plug type. R Environmental resisting with grommet seal, shorter and lightweight. Features for 97B reverse bayonet coupling connectors with Mil-C-5015 insert patterns: Quick positive coupling Audible and tactile indication of full coupling Waterproof No lockwiring required High shock and vibration capabilities Operating temperature range with Neoprene0 0 inserts: -55C to +125C Insert available in Neoprene material (alternate inserts materials available upon request) Available in both crimp and solder terminations Contacts available in gold and silver plating Numerous finishes available Zinc alloy plating (cadmium free) available 500 couplings minimum Rugged construction; aluminum or stainless steel components Intermateable with existing VG95234 connectors G eneral Description

Service rating Test Voltage Vac rms Inst. 1000V A 2000V D 2800V E 3500V B 4500V C 7000V Service rating Service rating Operating Voltage DC at Sea Level Operating Voltage AC at Sea Level Inst. 250V 200V A 700V 500V D 1250V 900V E 1750V 1250V B 2450V 1750V C 4200V 3000V Contact rating Contact Size Contact Resistance miliohms Rated Current 16 3.4613A 12 1.8323A 8 0.5246A 4 0.2680A 0 0.14150A E lectrical Data

Views looking into front face of pin insert or rear of socket insert 18-5 18-9 18-13 18-14 20-7 20-8 20-9 20-12 20-14 16-7 20-16 22-18 24-4 Degree W X Y Z 80 110 250 280 24-21 28-15 36-1 36-7 36-8 36-13 28-16 28-17 28-19 28-20 28-21 32-1 32-3 32-4 24-28 28-1 28-4 28-8 28-9 28-10 28-11 28-14 24-5 24-6 24-7 24-12 24-14 24-16 24-17 24-20 22-19 22-21 22-24 22-25 22-29 22-33 22-34 24-1 24-3 20-20 20-22 22-3 22-6 22-12 22-14 22-15 22-16 22-17 Position X To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. As shown in the daigram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees with respect to the normal shell key. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z which are as below : Insert Arrang- ement Degrees W 12S-3 14S-9 16S-5 18-8 18-1 18-22 20-3 20-4 14S-2 18-10 18-15 14S-5 16-9 16-11 16-13 18-3 18-4 20-5 16S-4 16S-1 18-12 14S-7 16-10 16S-6 18-20 18-29 16S-8 18-11 145 145 145 145 145 145 110 120 120 120 110 110 110 110 110 110 110 110 180 180 180 180 180 170 170 215 215 215 215 215 215 250 240 240 240 250 250 250 250 250 250 250 270 270 270 270 270 265 265 290 290 290 290 290 290 290 325 325 325 325 325 325 325 280 280 X Y Z Insert Arrang- ement Degrees W 28-3 28-6 28-18 28-22 36-3 36-4 24-22 28-5 28-2 28-7 36-6 36-9 36-10 32-8 24-27 28-12 36-14 36-15 36-5 145 145 145 145 145 145 110 110 110 110 110 125 125 125 180 180 125 120 215 215 215 215 215 215 250 250 250 250 250 235 235 235 270 270 245 240 290 290 290 290 290 290 325 325 325 325 280 280 280 280 305 X Y Z Insert Arrang- ement Degrees W 20-6 22-2 22-9 20-15 20-18 20-21 20-23 20-24 20-27 22-10 22-11 22-13 22-20 22-23 22-22 24-11 24-9 22-1 22-4 22-5 22-8 20-29 20-17 20-19 22-27 22-28 24-2 24-10 145 145 145 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 180 180 215 215 215 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 270 270 250 290 290 290 280 325 325 325 325 325 325 325 325 325 325 325 325 325 325 325 280 280 280 280 280 X Y Z A B A B A BA B 40-56 72 144 216 288 I nsert Orientation

A A A A D D Inst Inst Inst Inst A A B D A A A A D A Inst Inst A A D A A A D D D D/A A/Inst A A A B A/Inst D A A A D A D E A A A C A A D A A 20-8 Inst 6 42 12 16 Service Rating Total Cont- acts 14S-1 A 3 3 14S-A7 A 19 19 Insert Arran- gement Contact Size 0 4 8 20-9 20-11 20-12 20-14 20-15 20-16 20-17 20-19 20-20 20-23 20-24 20-27 20-25 20-18 20-21 20-22 D/A Inst A A A A A A A A A A Inst A A A 2 3 20-29 20-30 20-33 A Inst A 22-1 22-2 22-6 22-14 22-17 22-18 22-19 22-20 22-21 22-16 22-11 22-13 22-7 22-8 22-10 22-12 22-9 22-15 22-4 22-5 22-22 22-23 D D D A D/A D/A A A A A B D/A E E E D E E/A A D A D/A 2 2 2 4 22-28 22-34 24-2 24-5 24-6 24-7 24-9 24-10 24-3 22-24 22-27 A D D A D/A A A A D D/A D/A 142 24-11 A 9 63 24-12 A 5 32 12 16 Service Rating Total Cont- acts A20-A48 19 24-06 A 6 4 2 24-16 24-17 D/A D Insert Arran- gement Contact Size 0 4 8 12 16 Service Rating Total Cont- acts 28-20 28-21 28-22 32-3 32-1 28-18 28-19 A A D D D/A C/D/A/Inst B/D/A 4 6 3 3 2 421 24-20 24-21 24-22 24-27 24-28 28-1 28-2 28-4 28-5 28-8 28-9 28-11 28-12 28-13 28-15 28-16 28-17 28-10 28-3 28-6 28-7 D D D E Inst D/A D E/D D E/D/A D A A A A A B/D/A D/A E D D 7 7 122 212 102 184 2 2 3 D32-5 2 2 28-09 28-51 A D 32-8 A 30 6 24 36-17 38-18 36-52 36-20 A A A A 407 14141421 3022 36-15 36-16 36-8 36-9 36-10 36-11 36-13 36-14 36-12 D/A A A A A A E/A D A 407 2 15 5 5 6 1 46 1 2 14 14 36-3 36-6 36-7 36-5 36-4 D A A A D/A 36-1 D 22 4 18 2 4 40-56 A 85 85 A40-63 61 D32-17 4 4 32-6 A 23 2 3 2 16 32-7 INST,A 35 7 28 32B-13 D 13 13 32-22 A 54 54 18-06 6 4 2 20-2 1 1 24-4 1 3 36-46 A 27 27 I nsert Arrangements

A BC D EA BC A B C Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 A B CD E F G AB A B CBC D AA B C A B C D E A B CD E F A BC D AB ABA B C Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact 10S-2 A 10SL-3 A C Front of socket insert 14S-7 A B Insert arrangement Service rating Number of contacts Contact size Premating contact 16S-1 A G Insert arrangement Service rating Number of contacts Contact size Premating contact 16S-5 A A 16S-6 A B 16S-8 A E *14S-12 A B 100 rotation of 14S-7 10SL-4 A Front of socket insert 12S-3 A 12-5 D 12S-4 A 14S-2 Inst. 14S-4 D 14S-5 Inst. 14S-6 Inst. AB 14S-9 A *14S-10 Inst. 100 rotation of 14S-2 *14-3 A *16S-3 B 16S-4 D *16-2 E A B C F E G D 14S-1 B AC *Not tooled up, can be tooled up on request. Contact Factory. 14S-1 A 14S-A7 A I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 B A H CD E F G B A C D E F G A C D B A B C DA B C D E F B AD C B A C D E B C A A B AB A B A B C D EA B C D E F G H J K A G B C D E F Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact 16-10 A B B AD C 18-4 D A 18-10 A D B A C 18-5 D 2 1 12 16 C 18-11 A E 18-12 A C or D 18-19 A K *18-13 A 1 3 8 12 A 18-20 A D 18-8 A 1 7 12 16 H 16-11 A 16-12 A *16-13 A A B C DE F G H I J 18-1 B,C,F,G=A;Bal.=Inst. AB 18-3 D 18-9 Inst. 2 5 12 16 18-15 A *18-14 A 1 1 4 16 18-7 B *18-6 D 18-16 C 100 rotation of 18-9 *18-17 Inst. 2 5 12 16 *Not tooled up, can be tooled up on request. Contact Factory. A B C D A B C 16-7 A 1 2 8 16 C 16-9 A 2 2 12 16 18-06 A 2 4 16 12 B A C D E F I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 B A G H C DE F B A C D E F Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact A B CE D *18-29 A D 20-7 A,B,H,G=D;C,D,E,F=A A B A G CD E F 20-15 A A or D B A G I H C D E F 20-16 A 2 7 12 16 E B A C DE F G H 20-9 H=D;Bal.=A 1 7 12 16 H B A C D F E 20-17 A 5 1 12 16 E or F A BC 20-3 D A B A C D E F G H I 20-18 A 3 6 12 16 D B A C 20-19 A C B A C D E 20-14 A 2 3 8 12 D B A C D 20-20 A 1 3 4 12 A A B CE D *18-30 A C 110 rotation of 18-20 A B CE D *18-31 A C 260 rotation of 18-20 F A B C D E 20-22 A 3 3 8 16 A B 20-23 A 20-8 Inst. 2 4 8 16 B L A C D N M E F G H K J 20-11 Inst. B A *20-12 A 1 1 4 16 F A B C DE G H I *20-21 A 1 8 12 16 *Not tooled up, can be tooled up on request. Contact Factory. A BC D A BC 20-4 D C or D *20-6 D A A B C 18-22 D C B AH G I C DE F J 250 rotation of 18-1 *18-24 B,C,F,G=A;Bal.=Inst. A B C D EF G H J 20A - 9 A 20-2 D I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact A B C D E F N M J K GH P R S TL 20-29 A G A B C D EFG H J T Y P NK L M S R U 22-14 A A A C B D 22-10 E C K A B C D E F H J M L 20-33 A E A C B *22-6 D 2 1 8 16 B A BE D C 22-12 D 2 3 8 16 A A BC 22-2 D A 22-9 E A A BC 22-13 E=D;A,B,C,D=A 4 1 12 16 E A B E D C 22-5 D 2 4 12 16 D AF E B CD *22-4 A 2 2 8 12 C B A D C AB 22-11 B AB 22-1 D A B C D E F N M J KG H L o *20-30 Inst. 250 rotation of 20-11 22-7 E B A *22-8 E *Not tooled up, can be tooled up on request. Contact Factory. A B C D EF G H I J K L M N 20-27 A M A B C D E F G H J K L M N 100 rotation of 20-11 *20-25 Inst. A B C D 20-24 A 2 2 8 16 AML K U N B PVT J C RSH G D EF

20 A - 48

A I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact CONTACT LEGEND 16 12 8 4 0 22-28 A G C B AF GE D 22-20 A D A B C D E F J G H 22-24 C,D,E=D;A,B,F=A 2 4 12 16 D C B A F E D 22-19 A F A B C D E F N M J K G H P L 22-23 H=D;Bal.=A A or D A B C D E F G H 22-22 A C or D A BC D *22-21 A 1 2 0 16 A B C C B A F G H J E D 22-27 J=D;Bal.=A 1 8 8 16 *Not tooled up, can be tooled up on request. Contact Factory. A B H G F E D C 22-18 A,B,F,G,H=D;C,D,E=A D *22-17 A=D;Bal.=A 1 8 12 16 E A BH G F E D C J 22-16 A 3 6 12 16 D A B HG F E D C J 22-15 D=E;A,B,C,E,F=A 5 1 12 16 D A B C D E F 24-5 A S A BC D F H J L P R N S M K G E 24-6 A,G,H=D;Bal.=A D AG F E D H C B 24-4 A 3 1 16 0 A 24-4B C D 24-2 D A AF E G B CD *24-3 D 2 5 12 16 D AF E G B CD *22-34 D 3 2 12 16 E C A B E D I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact CONTACT LEGEND 16 12 8 4 0 24-11 A 3 6 8 12 E A B E FD G H I C 24-21 D 1 9 8 16 E B C AH G J K D E F *24-17 D 2 3 12 16 D B C D E A 24-20 D 2 9 12 16 A B C J H LK G F D E A *24-16 A,B,F,G=D;C,D,E=A 1 3 3 8 12 16 G A B C D E F G 24-12 A 2 3 4 12 A B C D E *24-27 E D A B C D G F E 24-22 D D BC AD 28-1 A,J,E=D;Bal.=A 3 6 8 12 E H A G F E J B C D F G H JE K L M N P Q VUTSR W X Y Z A B C D 24-28 Inst. *Not tooled up, can be tooled up on request. Contact Factory. 24-10 A D or E or G B C GE F A D AB 24-9 A 24-7 A 2 14 12 16 G H I J K L A B C D E F G O M NP *28-2 D 2 12 12 16 E H P K M N L A G F E J B C D A BC D E 24-06 24-06 A 2 4 16 8 I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact 28-12 A H A B C D E FG W V U T S R P N M Z YL K J H X a b d 28-10 G=D;Bal.=A 2 2 3 4 8 12 G B A G CD E F 28-11 A 4 18 12 16 M B A G H IM L K J N P R S T X W V U C D E F 28-6 D A C A B *28-13 A H 100 rotation of 28-12 o A B C D E FG W V T U S RP N M Z YL K J H X a b d 28-9 D 6 6 12 16 E B A J H G K M L C DE F 28-8 L,M=E;B=D;Bal.=A 2 10 12 16 D E F G H M L C D A B AB 28-7 D *28-4 G,S,P=E;Bal.=D 2 7 12 16 E AS G P B C E F D *28-5 D 2 1 2 4 12 16 A BE D C 28-3 E A A BC A B C D F G H J E 28-09 A 5 4 16 4 *Not tooled up, can be tooled up on request. Contact Factory. I nsert Arrangements

D B C D E F G H J A *32-3 D 1 2 2 4 0 4 12 16 B CD A E 32-1 A=E;B,C,D,E=A 2 3 0 12 28-51 D A B C D E F H J K L M N Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact B A G H C D J E K FL R N MP *28-17 R=B;M,N,P=D;A to L=A N A E K S Z f l m n p g h j k a b c d e T U V W X Y L M N P R F G H J B C D 28-21 A A B A G H C DJ E K L F M 28-18 M=C;G,H,J,K,L=D;A,B=ABal.=Inst. BA G H C J E L K M 28-19 H,M=B;A,B=D;Bal.=A 4 6 12 16 H B A G H C J E DF L KN P M 28-20 A 10 4 12 16 E B F C DE A 28-22 D 3 3 4 16 *Not tooled up, can be tooled up on request. Contact Factory. 28-16 A F A B C D EFG V U T S R Q P N ML K J H 28-15 A M A B C D E F G WVUTSRP NM Z a b c d e f g h j k l m Y LKJH X I nsert Arrangements

B D E F C ABA D E I K L M O P R S T U V W N F C G H J A B C D H JGF L M N S T U Y W RPO X Y Z K b c d e a f g h ji k l m n r o v w x y z AAAB AC AD AE AF AG Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact *Not tooled up, can be tooled up on request. Contact Factory. AD C B 1213 32B13 B D E I J K L F C G H M N O P R S T U V W X Y Z a b c d e A 32-8 A 6 24 12 16 S K L M N W X Y Z G H I J ST U V A B C D E F O P R W X 32-6 A 16 2 3 2 16 12 8 4 32-7 INST , A 4 24 7 16 12 F G H I J R S T U V K L M N W X Y Z A B C D E O P f g h j k a b c d e 32B-13 D 32-17 D 32-22 A *36-1 D 4 18 12 16 36-3 D 3 3 0 12 I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 B A C D M I J K L N R T X W V U S Z a Y b c f e d E H P O F G AB C D G F E H KI J M L RPON S T Y U V W X Z a b c d e jhgf m n k p r tus v w zyx kd l m n p r s xwvt y z u e f g h j aZYXWV UTSRQPO NMLKJH C D E F A B G b c BA C ED F H K L M N O P U V W X Y Z a b c dh e l f g m n u w v z y r p s y v kj R S T JI G A BC A B C D A F E B C D Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact 36-4 A=D;B,C=A *36-7 A 7 40 12 16 x or y 36-10 A A 36-5 A *36-8 A 1 46 12 16 Y *36-11 A A 100 rotation of 36-10 250 rotation of 36-10 o o 36-6 A 2 4 0 4 *36-9 A 1 2 14 14 4 8 12 16 P *36-12 A A kd l m n p r s xwvt y z u e f g h j aZYXWV UTSRQPO NMLKJH C D E F A B G b c kd l m n p r s xwvt y z u e f g h j aZYXWV UTSRQPO NMLKJH C D E F A B G b c *Not tooled up, can be tooled up on request. Contact Factory. I nsert Arrangements

Front face of pin insert or rear of socket insert illustrated CONTACT LEGEND 16 12 8 4 0 S R Q P A B C D E F G HJ K Z Y X M L N U Td e a b c k j m h g V f W A B E M NLK O U Y Z a h d e l f g m p s kjn r u w v y z y b c T V W X P R S C D G JI F H MS DIOU E A B H P J K F C GL N R T X W c bf e Y V Z d a P N M L A B C K J H G F E Q D R S Insert arrangement Service rating Number of contacts Contact size Premating contact Insert arrangement Service rating Number of contacts Contact size Premating contact *36-15 M=D;Bal=A J *36-16 A 7 40 12 16 x or y 100 rotation of 36-7 o A B E M NLK O U Y Z a h d e l f g m p s kjn r u w v y z y b c T V W X P R S C D G JI F H *36-17 A 7 40 12 16 x or y 250 rotation of 36-7 o Insert arrangement Service rating Number of contacts Contact size Premating contact *36-13 N,P,Q=E;Bal.=A 2 15 12 16 A B K J I H G N M F E D L Q P C *36-14 D 5 5 6 8 12 16 *36-18 A 1 2 14 16 4 8 12 16 100 rotation of 36-9 o R S T U V W X Y Z a b c d e h j k m f g P H J C D E F G BA K L NM *36-20 A 2 2 30 8 12 16 k A E L M N P R S T a b c d f g h i j k m n p q r s t u v w x y z AA AB AC AD AE AF AH U V W X Y Z F H J K B C D 36-52 A *Not tooled up, can be tooled up on request. Contact Factory. 40-56 A N P R S T U V W X Y Z a c d f h j k m n p r s t u v w x y z b g i p A A BA AC AD AE AF AH AJ AK AL AM AN AP AR AS AT AU AV AW AX AY AZ BA BB BC BD BE BF BH BJ BK LB BM BN BP BR BS BT BU BVX Y W Z 40 - 56 A C D E F H J K L M B 36-46 A 40-63 A A E LMNPR ST a bcd UVW XYZ FHJ K BCD G I nsert Arrangements

Cable Connecting Receptacle MS-3101 MS-4101 MOUNTING HOLES 4.39 DIA. FOR SIZE 32 AND 36 3.73 DIA. FOR SIZE 24 AND 28 3.05 DIA. FOR ALL OTHER SIZES 4.55 DIA. FOR 40 SIZE M AKV PANEL OPENING All dimensions are in mm Connector Size 1.98 1.98 1.98 1.98 1.98 1.98 3.17 3.17 3.17 3.17 3.17 3.17 3.17 3.17 3.45 14.29 20.62 20.62 20.62 23.82 23.82 26.97 26.97 30.17 33.32 36.52 39.67 46.02 53.0 58.72 62.00 14.29 14.29 14.29 19.05 19.05 19.05 19.05 19.05 19.05 20.64 20.64 22.25 22.22 22.22 18.25 20.64 20.64 23.02 23.02 24.61 24.61 26.99 29.37 31.75 34.92 39.69 44.45 49.21 55.58 25.68 27.76 27.76 30.43 30.43 32.82 32.82 35.07 38.38 41.55 44.70 51.08 57.15 63.78 69.85 5/8-24 NEF5/8-24 UNEF 11/16-24NEF 11/16-24NEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF1-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 7/8-20 UNEF1-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/8-18 UNEF 1 1/4-18 NEF 1 1/4-18 UNEF 1 3/8-18 NEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS 1 7/8-16UN2.00-18 UNS 2 1/16-16UN 2 5/16-16 UN 2 1/4-16 UN 2 1/2-16 UN 10SL 12S 14S 16S A K M O R S V Thread in inches Thread in inches Wall mounting receptacle V A All dimensions are in mm Connector Size 5/8-24 NEF5/8-24 UNEF 11/16-24 NEF 11/16-24 NEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF1-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 7/8-20 UNEF1-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/8-18 UNEF 1 1/4-18 NEF 1 1/4-18 UNEF 1 3/8-18 NEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS 2-18 UNS 2 5/16-16 UN 2 1/4-16 UN 2 1/2-16 UN 10SL 12S 14S 16S A V Thread in inches Thread in inches 1 7/8-16UN 2 1/16-16UN R R S S S hell style

M A A Q V K L N R S R S Box mounting receptacle Straight Plug MS-3102 MS-4102 MS-3106 MS-4106 MOUNTING HOLES 4.39 DIA. FOR SIZE 32 AND 36 3.73 DIA. FOR SIZE 24 AND 28 3.05 DIA. FOR ALL OTHER SIZES

4.55 FOR 40 SIZE

Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory. Connector Size 1.98 30.18 1.98 30.18 41.28 41.28 41.28 49.28 49.28 49.28 49.28 49.28 49.28 49.28 49.28 30.18 30.18 1.98 1.98 1.98 1.98 3.17 3.17 3.17 3.17 3.17 3.17 3.17 3.17 3.45 13.89 15.87 17.46 17.46 19.05 19.05 22.22 22.22 25.40 28.57 31.75 34.92 41.27 48.26 53.97 58.25 14.28 14.28 14.28 19.05 19.05 19.05 19.05 19.05 19.05 20.64 20.64 22.22 22.22 22.22 18.25 20.64 20.64 23.02 23.02 24.61 24.61 26.99 29.37 31.75 34.92 39.69 44.45 49.21 55.58 25.68 28.04 28.04 30.43 30.43 32.82 32.82 35.08 38.38 41.55 44.73 51.08 57.15 63.78 69.85 5/8-24 UNEF 3/4-20 UNEF 3/4-20 UNEF 1-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 UNEF 1 1/4-18 UNEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4-16 UN 2 1/2-16 UN 10SL 12S 14S 16S A K L M N R S Thread in inches Connector Size 19.05 19.84 19.84 22.22 22.22 25.40 25.40 28.57 31.75 34.92 38.10 44.45 51.75 57.15 63.50 5/8-24 NEF5/8-24 UNEF 11/16-24NEF 11/16-24NEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF1-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 7/8-20 UNEF1-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/8-18 UNEF 1 1/4-18 NEF 1 1/4-18 UNEF 1 3/8-18 NEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS 2-18 UNS 2 5/16-20 UN 2 1/4-16 UN 2 1/2-16 UN 10SL 12S 14S 16S A Q max V Thread in inches Thread in inches 1 7/8-16UN 2 1/16-16UN S hell style

Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory. All dimensions are in mm Connector Size 19.05 19.84 19.84 22.22 22.22 25.40 25.40 28.57 31.75 34.92 38.10 44.45 51.75 57.15 5/8-24 NEF5/8-24 UNEF 11/16-24 NEF 11/16-24 NEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF1-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 7/8-20 UNEF1-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/8-18 UNEF 1 1/4-18 NEF 1 1/4-18 UNEF 1 3/8-18 NEF 1 3/8-18 UNEF 1 1/2-18 UNEF 1 5/8-18 NEF1 3/4-18 UNS 1 29/32-18 NS2-18 UNS 2 1/16-20 UNS2 1/4-16 NS 10SL 12S 14S 16S A Q max V Thread in inches Thread in inches 63.50 2 5/16-16 UN2 1/2-16 UN 40 Q max VA THREAD A B E D F MAXC GO O Other Accessories Dummy receptacle MS-3105 All dimensions are in mm Note: The dash number also indicates shell size. D Thread in inches E F G max. CBAPart number (see note) 11.43 11.43 13.36 13.36 16.41 16.41 18.03 23.54 25.93 29.21 34.67 46.56 3.96 3.96 3.96 3.96 3.96 3.96 5.16 5.16 5.16 5.16 5.16 9.11 14.27 14.27 14.27 19.05 19.05 19.05 19.05 19.05 19.05 20.62 20.62 22.2 3/4-20 3/4-20 7/8-20 7/8-20 1-20 1-201-20 1 1/8-18 1 1/4-18 1 3/8-18 1 3/4-18 2 1/4-16 1 1/2-18 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.73 3.73 4.39 20.62 20.62 23.01 23.01 24.61 24.61 26.97 29.36 31.75 34.92 39.67 49.22 27.79 27.79 30.17 30.17 32.54 32.54 34.92 38.10 41.27 44.45 50.8 63.5 MS-3105-12S MS-3105-12 MS-3105-14S MS-3105-14 MS-3105-16S MS-3105-16 MS-3105-18 MS-3105-20 MS-3105-22 MS-3105-24 MS-3105-28 MS-3105-36 S hell style

A E D MS Part number Shell size A Thread in inches B C D E MS 10S-1-SL 5/8-24 11.11 11.11 11.11 11.11 11.11 11.11 11.11 12.7 12.7 12.7 12.7 11.11 20.7 3.6 3.6 3.6 3.6 3.6 4.4 4.4 4.4 4.4 4.8 4.8 4.8 102 MS 12-12S 3/4- 20 25.4 115 28.6 115 30.2 115 34.1 115 37.3 127 40.4 127 43.6 140 50 197 62.7 197 69 197 56.3 197 MS 14-14S 7/8-20 MS 16-16S 1-20 MS 18 1 1/8-18 MS 20 1 1/4-18 MS 22 1 3/8-18 MS 24 1 1/2-18 MS 28 1 3/4-18 MS 32 2-18 MS 36 2 1/4-18 MS 40 2 1/2-16 All dimensions are in mm MS-25043 For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal. Notes : 1. For protective caps with nylon cord, contact factory. Standard - Plating is Cad. For alternative finishes, contact factory. Standard - straight knurling. For diamond knurling on caps, contact factory. Please add 07 suffix for bigger end link. MS 25043-10D MS 25043-12D MS 25043-14D MS 25043-16D MS 25043-18D MS 25043-20D MS 25043-22D MS 25043-24D MS 25043-28D MS 25043-32D MS 25043-36D MS 25043-40D B MAX C MAX A E D MS Part number Shell size A Thread in inches B C D E MS 10S-1-SL 5/8-24 16.67 17.4 4 102 MS 12-12S 3/4- 20 21.4 20.6 4 115 21.4 23.7 4 115 21.4 26.9 4 115 21.4 30 4 115 21.4 33 4.8 127 21.4 36.4 4.8 127 21.4 39.6 4.8 140 21.4 46 4.8 197 21.4 58.7 5.6 197 21.4 65 5.6 197 21.4 52 5.6 197 MS 14-14S 7/8-20 MS 16-16S 1-20 MS 18 1 1/8-18 MS 20 1 1/4-18 MS 22 1 3/8-18 MS 24 1 1/2-18 MS 28 1 3/4-18 MS 32 2-18 MS 36 2 1/4-18 MS 40 2 1/2-16 All dimensions are in mm Other Accessories Protective cap for MS series MS-25042 For plugs Has external threads and is used on all plugs where a coupling ring is provided. MS 25042-10D MS 25042-12D MS 25042-14D MS 25042-16D MS 25042-18D MS 25042-20D MS 25042-22D MS 25042-24D MS 25042-28D MS 25042-32D MS 25042-36D MS 25042-40D P rotective Cap For MS Series

97B Series Bayonet Version connector

V R S M K L T THD100 27.60 27.60 27.60 27.60 33.80 33.80 33.80 33.80 35.70 35.70 37.30 37.30 5/8”-24 UNEF 5/8”-24 UNEF 3/4”-24 UNEF 7/8”-24 UNEF 7/8”-24 UNEF 1”-20 UNEF 1 1/8”-18 UNEF 1 1/8”-18 UNEF 1 3/8”-18 UNEF 1 5/8”-18 UNEF 1 7/8”-16 UN 2 1/16”-16 UN PG THD'R' 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.00 50.80 57.00 63.50 ‘L’ MAX ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size 045 O 0 S/ A/-LA T 0 A/ M K L T THD 27.60 27.60 27.60 27.60 33.80 33.80 33.80 33.80 35.70 35.70 37.30 37.30 5/8”-24 UNEF 5/8”-24 UNEF 3/4”-24 UNEF 7/8”-24 UNEF 7/8”-24 UNEF 1”-20 UNEF 1 1/8”-18 UNEF 1 1/4”-18 UNEF 1 3/8”-18 UNEF 1 5/8”-18 UNEF 1 7/8”-16 UN 2 1/16”-16 UN T -2A THD 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.70 41.30 47.60 54.00 60.60 25.00 27.60 29.60 32.10 32.10 34.60 37.60 40.90 44.40 50.70 56.90 63.40 ‘L’ MAX ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size ‘Q’ +0.20 102 0 V/ M K L R S 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 24.70 27.60 24.70 24.70 33.80 33.80 33.80 33.80 35.70 35.70 37.30 37.30 'R' 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +0.20- Wall mounting receptacle Cable connecting receptacle Box mounting receptacle 101 S hell style

L R S 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 27.60 27.60 27.60 27.60 33.80 33.80 33.80 33.80 35.70 35.70 37.30 37.30 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +0.20- 'R' +0.20- ‘A’ AFTER KNURLING ‘L’ T THD SHELL SIZE 'A' MAX. 10SL 12S 14S 16S 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 56.00 56.00 54.00 56.00 67.00 74.00 75.00 78.00 78.00 82.00 82.00 90.00 5/8”-24 UNEF 5/8”-24 UNEF 3/4”-24 UNEF 7/8”-24 UNEF 7/8”-24 UNEF 1”-20 UNEF 1 1/8”-18 UNEF 1 1/4”-18 UNEF 1 3/8”-18 UNEF 1 5/8”-18 UNEF 1 7/8”-18 UN 2 1/16”-16 UN 'T' - 2A THD 'L' MAX F L A D E C H 0 B/ 27.70 30.00 30.00 35.30 37.70 37.70 37.70 37.70 35.20 35.20 35.20 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX Rear mounting Receptacle Plug connector Jam Nut Receptacles 107 106 103

18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 65.51 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 55.50 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 69.90 24.70 24.70 24.70 24.70 33.80 33.80 33.80 33.80 33.80 33.80 33.80 33.80 33.80 ‘R’‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size ‘S’ +0.20 ‘L’ +0.20- 9.00L 1.5 for size 12 0.76 for size 16 KMR S A o Box mount Receptacle with PC Tail contacts 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 65.51 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 3.99 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 55.50 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 69.90 24.70 24.70 24.70 24.70 33.80 33.80 33.80 33.80 33.80 33.80 33.80 33.80 33.80 ‘R’‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size ‘S’ +0.20 ‘L’ +0.20- Rear Mount Receptacle with PC Tail contacts o o 7.00 7.00 1.5 for size 12 0.76 for size 16 o o L 9.00 KM A o R S 10SL 14S 16S 7/8”-2OUNEF 1” 1/8-18UNEF 1” 1/4-18UNEF 1” 1/4-18UNEF 1” 3/8-18UNEF 1” 1/2-18UNEF 1” 5/8-18UNEF 1” 3/4-18UNS 2”-18UNS 2” 1/4-16UN 2” 1/2-16UN 2” 3/4-16 UN ‘A’ -2A Threads Shell Size 18.20 24.60 27.40 27.40 30.80 34.20 37.40 40.90 46.70 53.40 59.60 65.50 ‘B’ +0.00 - 0.15 35.00 41.30 44.40 44.40 48.20 52.40 55.50 59.00 66.00 72.00 80.00 87.00 5.00 6.00 6.00 6.00 7.00 7.00 7.00 7.00 7.00 7.00 8.00 8.00 2.50 2.50 2.50 2.50 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 31.80 38.10 41.20 41.20 45.00 49.20 52.40 55.20 62.20 68.20 75.20 82.20 G‘C’ 31.50 37.90 41.00 41.00 44.80 49.00 52.20 55.00 62.00 68.00 75.00 82.00 22.70 28.80 32.00 32.00 35.10 38.20 42.00 44.70 51.10 57.40 63.80 70.20 29.20 29.20 29.20 37.70 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 H L1‘D’ ‘E’ F L3 L4L2 13.50 13.50 13.50 13.50 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 12.50 12.50 12.50 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 20.90 27.20 30.40 30.40 33.60 36.80 39.90 43.10 49.20 55.70 62.00 68.50 Jam Nut receptacles with PC Tail contacts C D L3 L2 6.00 max 0.76 (#16) 1.50 (#12) G E F B A 7.00 9.00 H Panel Cut Out S hell style

18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 45.00 45.00 48.00 48.00 55.00 60.00 65.00 65.00 68.00 68.00 70.00 70.00 ‘T’ THD ‘L’ MAX ‘S’ +0.20 ‘R’‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size TTHD 100A R S M L K A A 100F R S M K L SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 60.00 60.00 61.00 61.00 68.00 72.00 74.00 74.00 78.00 78.00 82.00 82.00 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'R' 'S' +-0.20 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 47.00 47.00 47.00 48.00 54.40 56.40 56.40 56.40 57.40 57.40 58.10 58.10 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'R' 'S' +-0.20 'L' MAX.100R R S M L K A Wall Mount Receptacle with A type Solid B/S Wall Mount Receptacle with F type Strain Relief B/S & Environmental sealing Grommet Wall Mount Receptacle with R type B/S & Environmental sealing Grommet 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18 UNS 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 68.60 68.60 68.60 68.60 75.00 75.00 75.00 75.00 77.00 77.00 80.00 80.00 ‘T’ THD ‘L’ MAX ‘S’ +0.20 ‘R’‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size 100AG Wall Mount Receptacle with A type solid B/S & Environmental sealing Grommet S hell style

A PG THD R S M K L 56.00 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 7, 9, 11 7, 9, 11 11, 13.5 9, 11, 16 9, 11, 16 9, 11, 16, 21 11, 16, 21 13.5, 16, 21 13.5, 16, 21, 29 16, 21, 29 21, 29 21, 29, 36 PG THD'R' 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘L’ MAX ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Wall Mount Receptacle with PG threaded type B/S suitable for PG Glands 100EGM/PHM R S M K L A 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 95.60 95.60 95.60 95.60 102.00 102.00 102.00 102.00 104.00 104.00 106.00 106.00 'R' 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 Wall Mount Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush 100SQ A R S M K L 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 57.00 57.00 59.00 59.00 66.00 66.00 66.00 66.00 68.00 68.00 70.00 70.00 'R'SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. Wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet & Heat shrinkable option SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'R' 'S' +-0.20 'L' MAX. 52.50 52.50 54.40 54.40 61.00 62.00 62.00 65.00 65.00 66.00 71.00 75.00 100G A R S M K L Wall Mount Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet S hell style

18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. 'R' 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 21.50 21.50 23.00 24.60 24.60 27.00 29.00 31.00 34.00 36.00 44.00 46.00 'P' MAX. 40.50 40.50 42.00 45.00 52.00 53.00 58.00 58.00 63.00 63.00 69.00 72.30 100RT R S M L K P A Wall Mount Receptacle with 90 B/S & Environmental sealing Grommet 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18 UNS 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 25.00 27.60 29.60 32.10 32.10 34.60 37.60 40.90 44.40 50.70 56.90 63.40 45.00 45.00 48.00 48.00 55.00 60.00 65.00 65.00 68.00 68.00 70.00 70.00 ‘T’ THD ‘L’ MAX ‘S’ +0.20 ‘Q’‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size101A A S K L M T THD Q A/FLA Cable connecting Receptacle with A type Solid B/S 101F Q A/FLA S A K L M SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 25.0 27.60 29.60 32.10 32.10 34.60 37.60 40.90 44.40 50.70 56.90 63.40 60.00 60.00 61.00 61.00 68.00 72.00 74.00 74.00 78.00 78.00 82.00 82.00 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'Q' +-0.20 'S' +-0.20 'L' MAX. Cable connecting Receptacle with F type Strain Relief B/S & Environmental sealing Grommet R S M K L A 100M 18.20 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 'R' M12X1.5 M16X1.5 M16X1.5 M16X1.5 M20X1.5 M25X1.5 M25X1.5 M32X1.5 M32X1.5 M36X1.5 M40X1.5 M THD 'L' MAX. 10SL 14s 16s 18.21 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Wall Mount Receptacle with Metric threaded type B/S suitable for Metric Glands M Thread S hell style

A 045 Q A/FLA S M K L 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 52.50 52.50 54.40 54.40 61.00 62.00 63.00 65.00 65.00 66.00 71.00 75.00 'Q' +-0.20 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. Cable connecting Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet 101AG 045 Q A/FLA S A T THD M K L 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 'Q' +-0.20 68.60 68.60 68.60 68.60 75.00 75.00 75.00 75.00 77.00 77.00 80.00 80.00 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18 UNS 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘T’ THD ‘L’ MAX ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Cable connecting Receptacle with A type Solid B/S & Environmental sealing Grommet 101PG Q A/FLA S A PG THD MK L 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 'Q' +-0.20 56.00 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 7, 9, 11 7, 9, 11 11, 13.5 9, 11, 16 9, 11, 16 9, 11, 16, 21 11, 16, 21 13.5, 16, 21 13.5, 16, 21, 29 16, 21, 29 21, 29 21, 29, 36 PG THD 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘L’ MAX ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Cable connecting Receptacle with PG threaded type B/S suitable for PG Glands 045 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.00 60.00 25.00 27.60 29.60 32.10 32.10 34.60 37.60 40.90 44.40 50.70 56.90 63.40 47.00 47.00 47.00 48.00 54.40 56.40 56.40 56.40 57.40 57.40 58.10 58.10 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 ‘Q' +0.20 'S' +-0.20 'L' MAX.101R Q A/FLA S A K L M Cable connecting Receptacle with R type B/S & Environmental sealing Grommet S hell style

A Q A/FLA S M K L 101SQ 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 'Q' +-0.20 57.00 57.00 59.00 59.00 66.00 66.00 66.00 66.00 68.00 68.00 70.00 70.00 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. Cable connecting Receptacle with SQ type Shielded B/S & Environmental sealing Grommet & Heat Shrinkable option 101M Q A/FLA S A M THD M K L 20.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 'Q' +-0.20 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 M12X1.5 M16X1.5 M16X1.5 M16X1.5 M20X1.5 M25X1.5 M25X1.5 M32X1.5 M32X1.5 M36X1.5 M40X1.5 M THD 'L' MAX. 10SL 14s 16s 18.21 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Cable connecting Receptacle with Metric threaded type B/S suitable for Metric Glands 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18 UNS 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 45.00 45.00 48.00 48.00 55.00 60.00 65.00 65.00 68.00 68.00 70.00 70.00 ‘T’ THD ‘L’ MAX ‘S’ +0.20 ‘R’ +0.10 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size103A R S A K L M T THD Rear wall Mount Receptacle with A type Solid B/S 101EGM/PHM A L KM Q A/FLA S 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 95.60 95.60 95.60 95.60 102.00 102.00 102.00 102.00 104.00 104.00 106.00 106.00 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 20.60 23.60 25.40 28.60 28.60 31.70 34.90 31.80 41.30 47.60 54.0 60.60 'Q' +-0.20 Cable connecting Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush S hell style

18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 47.00 47.00 47.00 48.00 54.40 56.40 56.40 56.40 57.40 57.40 58.10 58.10 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'R' 'S' +-0.20 'L' MAX.103R A K L MR S Rear wall Mount Receptacle with R type B/S & Environmental sealing Grommet 103G A R S M K L 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'R' +-0.10 52.50 52.50 54.40 54.40 61.00 62.00 63.00 65.00 65.00 66.00 71.00 75.00 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 Rear wall Mount Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet 103AG A T THD R S M K L 68.60 68.60 68.60 68.60 75.00 75.00 75.00 75.00 77.00 77.00 80.00 80.00 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18 UNS 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘T’ THD ‘L’ MAX ‘S’ +0.20 ‘R’ +0.10 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Rear wall Mount Receptacle with A type Solid B/S & Environmental sealing Grommet SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'R' +-0.10 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'S' +-0.20 5/8-24 UNEF 5/8 24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 'T' THD. 60.00 60.00 61.00 61.00 68.00 72.00 74.00 74.00 78.00 78.00 82.00 82.00 'L' MAX103F A R S M K L Rear wall Mount Receptacle with F type Strain Relief B/S & Environmental sealing Grommet S hell style

103 EGM/PHM

R S M K L A 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 95.60 95.60 95.60 95.60 102.00 102.00 102.00 102.00 104.00 104.00 106.00 106.00 'R' 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'L' MAX. SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 Rear wall Mount Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush 103SQ A K L MR S 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 57.00 57.00 59.00 59.00 66.00 66.00 66.00 66.00 68.00 68.00 70.00 70.00 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 'R' +-0.10 18.20 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 'R' M12X1.5 M16X1.5 M16X1.5 M16X1.5 M20X1.5 M25X1.5 M25X1.5 M32X1.5 M32X1.5 M36X1.5 M40X1.5 M THD 'L' MAX. 10SL 14s 16s 18.21 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 25.40 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘S’ +0.20 ‘M’ +0.41 - 0.0 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size M THD R S M K L A 103M Rear wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet & Heat Shrinkable Option Rear wall Mount Receptacle with Metric threaded type B/S suitable for Metric Glands 18.20 18.20 18.20 18.20 23.05 23.05 23.05 23.05 23.05 24.05 24.05 24.05 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 'M' +0.41 -0.0 'R' +-0.10 56.00 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 7, 9, 11 7, 9, 11 11, 13.5 9, 11, 16 9, 11, 16 9, 11, 16, 21 11, 16, 21 13.5, 16, 21 13.5, 16, 21, 29 16, 21, 29 21, 29 21, 29, 36 PG THD 10SL 12s 14s 16s 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 ‘L’ MAX ‘S’ +0.20 ‘K’ +0.20 ‘A’ +0.0 -0.15 Shell Size Rear wall Mount Receptacle with PG threaded type B/S suitable for PG Glands PG THD L KM A 103PG R S S hell style

L ‘A’ AFTER KNURLING. 'T' THD 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS SHELL SIZE 'A' MAX. 'L' MAX. 10SL 12S 14S 16S 22.80 25.60 29.20 32.00 32.00 36.50 39.39 46.10 46.60 53.40 60.10 36.30 44.00 44.00 46.00 46.00 46.00 55.00 62.00 65.00 65.00 68.00 70.00 70.00 Straight Plug with A type solid B/S SHELL SIZE 'A' MAX. 10SL 12S 14S 16S 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 60.00 60.00 60.00 60.00 68.00 72.00 74.00 74.00 78.00 78.00 82.00 82.00 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 'T' THD. 'L' MAX106F ‘A’ AFTER KNURLING. L 'A' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 36.30 47.00 47.00 47.00 47.00 55.40 57.40 57.40 57.40 57.40 57.40 58.10 58.10 SHELL SIZE 10SL 12S 14S 16S 'L' MAX.106R ‘A’ AFTER KNURLING L Rear wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet Straight Plug with R type B/S & Environmental sealing Grommet 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. 'R' 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 21.50 21.50 23.00 24.60 24.60 27.00 29.00 31.00 34.00 36.00 44.00 46.00 'P' MAX. 40.50 40.50 42.00 45.00 52.00 53.00 58.00 58.00 63.00 63.00 69.00 72.30 Rear wall Mount Receptacle with 90 B/S & Environmental sealing Grommet 103RT A R S M L K P S hell style

L is t Of Qualified Part Numbers 'A' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 SHELL SIZE 10SL 12S 14S 16S 56.00 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 7, 9, 11 7, 9, 11 11, 13.5 9, 11, 16 9, 11, 16 9, 11, 16, 21 11, 16, 21 13.5, 16, 21 13.5, 16, 21, 29 16, 21, 29 21, 29 21, 29, 36 PG THD ‘L’ MAX ‘A’ AFTER KNURLING 106PG PG THD L Straight Plug with PG threaded type B/S suitable for PG Glands 106AG T THD L‘A’ AFTER KNURLING 'A' MAX. 'L' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 68.60 68.60 67.00 67.00 76.00 76.00 76.00 76.00 78.00 78.00 80.00 80.00 SHELL SIZE 10SL 12S 14S 16S 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18UNEF 1 3/16-18UNEF 1 7/16-18UNEF 1 7/16-18UNEF 1 3/4-18UNS 2-18 UNS ‘T’ THD Straight Plug with A type Solid B/S & Environmental sealing Grommet

106 EGM/PHM

22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 53.00 53.00 53.00 53.00 61.00 62.00 63.00 65.00 65.00 68.00 71.00 75.00 'A' MAX 'L' MAX AFTER KNURLING L‘A’ 106G Straight Plug with G type B/S for Heat Shrinkable & Environmental sealing Grommet SHELL SIZE 10SL 12S 14S 16S 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 53.00 53.00 53.00 53.00 61.00 62.00 63.00 65.00 65.00 68.00 71.00 75.00 'A' MAX 'L' MAX ‘A’ AFTER KNURLING S hell style

69.00 72.00 72.00 83.00 87.00 89.00 89.00 92.00 95.00 97.00 97.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX 107TF H F A L D B C E Jam Nut Receptacle with F type Strain Relief B/S with Environmental sealing Grommet SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L 52.00 58.00 58.00 68.00 76.00 80.00 80.00 82.00 84.00 85.00 85.00 D WALL THICKNESS MIN MAX 107TA T THD LA F C E DH B Jam Nut Receptacle with A type Solid B/S 106M M THD L ‘A’ AFTER KNURLING 'A' MAX. 22.80 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 56.00 56.00 58.00 66.00 74.00 74.00 77.00 77.00 78.00 78.00 90.00 M12X1.5 M16X1.5 M16X1.5 M16X1.5 M20X1.5 M25X1.5 M25X1.5 M32X1.5 M32X1.5 M36X1.5 M40X1.5 M THD 'L' MAX. 10SL 14s 16s Shell Size Straight Plug with Metric threaded type B/S suitable for Metric Glands SHELL SIZE 10SL 12S 14S 16S 'A' MAX. 'L' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 56.60 56.60 57.00 57.00 66.00 66.00 66.00 66.00 68.00 66.00 70.00 70.00 106SQ L‘A’ AFTER KNURLING Straight Plug with SQ type Shielded B/S & Environmental sealing Grommet & Heat Shrinkable option S hell style

B PG THD H C D E L A F 64.60 68.00 70.00 81.00 89.00 90.00 93.00 91.00 95.00 94.00 105.00 PG THD 7, 9,11 11,13.5 9,11,16 9,11,16 9,11,16,21 11,16,21 13.5,16,21 13.5,16,21 16,21,29 21,29 21,29,36 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL MIN MAX THICKNESS Jam Nut Receptacle with PG threaded type B/S suitable for PG Glands 107AG T THD B H C E D L A F 77.00 80.00 80.00 90.00 92.00 92.00 92.00 92.00 94.00 94.00 94.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX Jam Nut Receptacle with AG type B/S for heat shrinkable & Environmental sealing Grommet 10SL 14S 16S 7/8”-2OUNEF 1” 1/8-18UNEF 1” 1/4-18UNEF 1” 1/4-18UNEF 1” 3/8-18UNEF 1” 1/2-18UNEF 1” 5/8-18UNEF 1” 3/4-18UNS 2”-18UNS 2” 1/4-16UN 2” 1/2-16UN ‘A’ -2A Threads Shell Size 18.20 24.60 27.40 27.40 30.80 34.20 37.40 40.90 46.70 53.40 59.60 ‘B’ +0.00 - 0.15 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E MAX. Wall Thickness‘C’ D MIN. 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 F +0.25 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 61.00 66.00 66.00 76.00 78.00 79.00 81.00 79.00 82.00 85.00 90.00 H L 107G 56.00 59.00 70.00 72.00 72.00 72.00 72.00 72.00 74.00 74.00 74.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX Jam Nut Receptacle with R type B/S with Environmental sealing Grommet 107TRH C D E A F L B Jam Nut Receptacle with G type B/S for Heat shrinkable & Environmental sealing Grommet H F L A E D C B0/ S hell style

F H C D E A L S M THD M THD M12X1.5 M16X1.5 M16X1.5 M16X1.5 M20X1.5 M25X1.5 M25X1.5 M32X1.5 M32X1.5 M36X1.5 M40X1.5 66.00 70.20 70.20 80.00 81.00 81.00 82.00 82.00 84.00 84.00 84.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX 49.00 54.00 57.00 66.00 69.00 75.00 75.00 77.00 80.00 84.00 87.00 'P' MAX. 21.50 23.00 24.60 24.60 27.00 29.00 31.00 34.00 36.00 44.00 46.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX 107TRT F H C D E P L A B Jam Nut Receptacle with 90 B/S & Environmental sealing Grommet Jam Nut Receptacle with Metric threaded type B/S suitable for Metric Glands 107TSQH C D E L A F 66.00 70.20 70.20 80.00 81.00 81.00 82.00 82.00 84.00 84.00 84.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX Jam Nut Receptacle with SQ type Shielded B/S & Environmental sealing Grommet & Heat Shrinkable Option 104.20 107.00 107.00 107.00 118.00 118.00 118.00 118.00 120.00 120.00 120.00 SHELL SIZE A -2A THREADS 10SL 14S 16S 7/8" - 20 1" 1/8-18 UNEF 1' 1/4-18 UNEF 1" 1/4- 18 UNEF 1" 3/8- 18 UNEF 1" 1/2- 18 UNEF 1" 5/8- 18 UNEF 1" 3/4- 18 UNS 2" - 18 UNS 2" 1/4- 16 UN 2" 1/2- 16 UN UNEF B +0.0 -0.15 18.20 24.60 27.40 27.40 30..80 34.20 37.40 40.90 46.70 53.40 59.60 C 24.50 26.80 26.80 32.10 33.70 33.70 33.70 33.70 35.20 35.20 35.20 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 2.40 5.20 7.50 7.50 7.50 9.00 9.00 9.10 9.10 8.50 6.50 8.30 E 4.00 4.80 4.80 4.80 4.80 4.80 4.80 4.80 5.60 5.60 5.60 F +-0.25 31.80 41.30 44.40 44.40 47.60 50.80 54.20 57.20 63.50 69.80 76.20 H 27.00 33.00 38.10 38.10 39.70 44.00 46.00 50.80 55.00 62.00 71.00 L D WALL THICKNESS MIN MAX Jam Nut Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush 107TEGM/PHM L A D C E B S hell style

Q PG THD P L 'A' MAX. 'L' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 SHELL SIZE 10SL 12S 14S 16S 41.00 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 70.00 74.00 'P' MAX. 50.00 50.00 52.00 55.00 57.00 67.00 69.00 74.00 75.00 78.00 85.00 98.00 PG THD 7, 9, 11 7, 9, 11 11, 13.5 9, 11, 16 9, 11, 16 9, 11, 16, 21 11, 16, 21 13.5, 16, 21 13.5, 16, 21, 29 16, 21, 29 21, 29 21, 29, 36

90 Plug connector with PG threaded type B/S suitable for PG Glands

'A' MAX. 'L' MAX. 10SL 12S 14S 16S 22.80 25.60 29.20 32.00 32.00 36.50 39.39 46.10 46.60 53.40 60.10 36.30 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 70.00 70.00 74.00 'P' MAX. 38.00 40.00 41.00 45.00 45.00 48.00 50.00 52.00 56.00 58.00 68.00 70.00 108E Q L P

90 Plug connector with Strain Relief B/S & Environmental sealing Grommet

22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 41.00 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 76.00 'A' MAX 'L' MAX ‘P' MAX 46.00 46.20 50.00 52.00 52.00 55.00 58.00 62.00 63.00 65.00 76.00 SHELL SIZE 'A' MAX. 'L' MAX. 'T' THD 10SL 12S 14S 16S 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 41.00 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 70.00 74.00 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 'P' MAX. 21.50 21.50 23.00 24.60 24.60 27.00 29.00 31.00 34.00 36.00 44.00 46.00

90 Plug Connector

108A=Supplied without grommet

90 Plug connector with G type B/S for Heat Shrinkable & Environmental sealing Grommet

A L T THD P L P Q 108R=Supplied with grommet S hell style

P M THD L Q 'A' MAX. ‘L' MAX. 22.80 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 70.00 74.00 'P' MAX. 49.50 49.50 49.50 52.00 63.00 65.00 67.00 73.00 75.00 85.00 98.00 M12X1.5 M16X1.5 M16X1.5 M16X1.5 M20X1.5 M25X1.5 M25X1.5 M32X1.5 M32X1.5 M36X1.5 M40X1.5 M THD 10SL 14s 16s Shell Size

90 Plug connector with Metric threaded type B/S suitable for Metric Glands

'A' MAX. 'L' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 41.00 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 70.00 74.00 'P' MAX. 49.00 51.00 55.00 56.00 56.00 59.00 60.00 63.00 66.00 67.00 75.00 77.00 SHELL SIZE 10SL 12S 14S 16S Q P L 108SQ

90 Plug connector with SQ type Shielded B/S & Environmental sealing Grommet &

Q P L SHELL SIZE 10SL 12S 14S 16S 'A' MAX. 'L' MAX. 22.80 25.60 29.20 32.00 32.00 36.50 39.90 43.10 46.60 53.40 60.10 66.30 41.00 41.00 41.00 43.00 53.00 55.00 60.00 60.00 64.00 64.00 70.00 74.00 'P' MAX. 91.00 91.00 91.00 93.00 93.00 95.00 97.00 99.00 102.00 103.00 111.00 113.00

90 Plug connector with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush

e All dimensions are in mm 22.8 29.2 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.5 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3 18.2 24.6 24.6 29.4 31.8 34.9 39.7 44.5 49.2 55.5 28.1 28.1 28.1 37.6 38.6 38.6 38.6 41.8 2.8 3.2 3.2 3.2 25.4 32.5 32.5 44.5 50.8 63.5 69.9 Max Shell Size 10SL 14S 16S H13 e 0.1 0.2 0.3+-+-+- Panel mounting plug connector 97B - 3164 97B-4164 L3 L4 d 2 eL1 LP S hell style

A Solid backshell without grommet and sleeve Class A Solid Backshell With Grommet & Sleeve Class R All dimensions are in mm Connector Size 47 48 47 --- 55 --- 47 48 55 --- 47 48 55 56 57 57 57 57 57 57 57 57 57 57 58.25 60 58.25 58.25 21.505/8-24 NEF 20.35 20.35 23.40 23.40 11/16-24 NEF 11/16-24 NEF 26.717/8-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 26.71 29.50 35.70 1-20 UNEF 35.85 1 1/8-18 NS 44.40 1 1/4-18 NEF 1 3/8-18 NEF 45.081 5/8-18 NEF 52.36 56.81 64.502 5/16-16 UN 10SL 12S 14S 16S A Thread L max for MS L max for 97B Q maxclass 2B in inches All dimensions are in mm Connector Size 32.54 37.60 19.05 37.31 --- 19.84 46.83 --- 19.84 36.51 37.64 22.22 46.83 --- 22.22 37.70 38.83 25.40 48.02 48.00 25.40 50.80 51.58 28.57 53.97 54.75 31.75 53.97 54.75 34.92 57.15 57.94 38.10 57.15 57.94 44.45 59.0 59.78 51.75 60.32 71.80 61.13 80.00 57.15 63.50 5/8-24 UNEF 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4 - 16 UN 10SL 12S 14S 16S L max for MS L max for 97B Q max V Thread in inches 5/8-24 NEF 11/16-24 NEF 11/16-24 NEF 7/8-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/4-18 NEF 1 3/8-18 NEF 1 5/8-18 NEF 2 5/16-16 UN A Thread in inches Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory. For Plug type For Receptacle 1 7/8-16UN 2 1/16-16UN 1 7/8-16UN 2 1/16-16UN B ack accessory

Strain relief backshell with grommet and sleeve Class E and F Right Angle Backshell With Or Without Grommet Class A, F & R L A N All dimensions are in mm Connector Size 37.60 37.80 47.30 39.40 48.90 42.60 52.10 53.70 58.80 58.80 63.60 63.60 69.60 72.8072.80 76.00 45.00 25.00 25.00 25.00 27.00 27.00 28.00 28.00 31.00 34.00 34.00 37.00 39.00 45.00 48.00 22.22 25.40 25.40 28.57 28.57 31.75 31.75 34.13 37.30 40.48 43.66 50.00 56.50 62.71 --- --- 47.00 --- 48.00 57.00 58.00 61.00 61.00 66.00 66.00 72.00 75.00 78.00 5/8-24 UNEF 5/8-24 UNEF 5/8-24 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4 -16 UN 10SL 12S 14S 16S L max for MS L max for 97B max Q max V Thread in inches All dimensions are in mm Connector Size 54.07 55.90 55.90 64.41 65.94 67.41 67.41 73.28 73.28 74.75 74.7574.75 86.0 54.07 59.10 --- 61.34 62.86 71.10 72.55 72.55 76.82 77.82 77.64 125.0 21.97 21.97 25.15 28.45 28.45 30.76 37.29 37.29 44.45 52.22 44.45 57.15 67.10 10SL 12S 14S 16S L max for MS L max for 97B N max 5/8-24 NEF 11/16-24 NEF 7/8-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/4-18 NEF 1 3/8-18 NEF 1 5/8-18 NEF 2 5/16-16 UN A Thread class 2B in inches 5/8-24 NEF 11/16-24 NEF 11/16-24 NEF 7/8-20 UNEF 3/4-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 NS 1 1/4-18 NEF 1 3/8-18 NEF 1 5/8-18 NEF 2 5/16-26 UN A Thread class 2B in inches L A V Q Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory. 55.00 62.71 1 7/8-16UN 2 1/16-16UN 1 7/8-16UN 2 1/16-16UN B ack accessory

Shell size A Min. B L Max. 10SL 12S 14S 16S 7.70 8.20 10.60 13.50 14.60 18.70 24.60 27.00 22.30 24.80 28.50 35.10 34.50 41.00 22 20.80 44.80 27.00 29.50 33.50 35.70 34.00 34.10 C- THD 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 NEF 1 1/4-18 UNEF 1 3/8-18 NEF 1 5/8-18 NEF 38.50 48.20 33.30 51.50 56.00 62.00 34.20 34.20 36.60 1 7/8-16 UN 2 1/16-16 UN 2 5/16-16 UN 20.30 30.00 5/8-24 NEF Heat Shrink Boot adaptor (G) Back Accessories Cable clamp MS-3057 Use MS-3420 sleeves C B A Part number MS-3057-4A 10SL, 12S 20.90 21.39 7.94 5/8-24 MS-3057-6A 14, 14S 21.59 25.27 11.11 3/4-20 MS-3057-8A 16, 16S 23.37 28.45 14.29 7/8-20 MS-3057-10A 18 23.37 30.89 15.87 1-20 MS-3057-12A 20,22 23.07 35.03 19.50 1 3/16-18 MS-3057-16A 24,28 25.78 42.75 23.81 1 7/16-18 MS-3057-20A 32 28.00 51.00 31.70 1 3/4-18 MS-3057-24A 36 29.36 57.02 34.92 2-18 Shell size Max OD of cable A B C Thread in inches All dimensions are in mm 5.59 7.92 11.10 14.27 15.87 19.05 23.80 31.75 A L 3.50+0.20 CB B ack accessory

PG 11 PG 13 PG 16 PG 21 PG 29 PG 36 G L PG B A ‘O’ Ring Shell size G Thread in inches EGM/PHM 11 EGM/PHM 21 10SL 12SL 5/8”-24 25.00 37.00 27.00 41.00 11/16”-24 3/4”-20 7/8”-20 1”-20 1.1/8”-18 1.1/4”-18 1.29/32”-18 2.1/6”-18 25.00 25.00 25.00 29.00 31.50 35.00 35.00 52.00 24 1.3/8”-18 52.00 37.00 37.00 40.00 40.00 52.00 60.00 60.00 70.00 70.00 27.00 27.00 27.00 31.00 33.50 35.00 35.00 52.00 52.00 41.00 41.00 43.00 43.00 55.00 60.00 60.00 70.00 70.00 D DL L EGM/PHM Backshell Accessories Note:- Rubber Bush supplied in Packing In case of PHM inner metal Furrele is not required/supplied G L D ‘O’ RING EGM INNER METAL FERRULE PLASTIC CDMB RUBBER BUSH EGM BACKSHELL GLAND NUT EGM/PHM11 Can accept cable Min. 5.70 mm & Max. 10.85 mm EGM/PHM21 Can accept cable Min. 12.70 mm & Max. 17.85 mm B ack accessory

Rubber bushing. Protects wire bundles and unjacketed cables from possible damage by cable clamp. Neoprene Sleeve MS-3420 D F E 450 B A C All dimensions are in mm Part number MS-3420-4 5.59 7.67 12.70 69.85 MS-3420-6 7.92 10.84 15.59 66.67 MS-3420-8 11.10 14.02 18.77 63.50 MS-3420-10 14.27 15.62 21.94 60.32 MS-3420-12 15.87 18.80 26.23 56.20 MS-3420-16 19.05 23.54 26.39 53.97 MS-3420-20 23.80 31.50 40.41 50.80 MS-3420-24 31.75 34.67 46.79 47.62 A B C D E Rad in inches F Rad in inches 0.79 0.79 1.59 1.59 1.59 1.59 1.59 1.59 0.79 0.79 1.59 1.59 1.59 1.59 1.59 1.59 1.59 Plain Flat Gasket For MS and 97B flange mounted receptacles All dimensions are in mm Part number MS-101000 10SL 15.90 25.40 4.35 4.35 4.35 4.35 5.15 5.15 5.15 5.15 5.15 5.55 5.55 5.55 27.80 30.15 32.50 34.90 38.10 41.20 44.45 50.80 57.15 63.50 69.85 18.26 20.62 23.01 24.61 27.00 29.36 31.75 34.90 39.70 44.45 49.22 55.77 19.05 22.20 25.40 28.57 31.75 34.90 38.10 44.45 50.80 55.57 61.92 12S & 12 14S & 14 16S & 16 MS-108686 MS-101001 MS-101002 MS-101003 MS-101004 MS-101005 MS-108687 MS-101007 MS-110831 MS-101006 MS-108688 Shell size A max B C D T 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 T B D

4 HOLES

O A A C CO B ack accessory

Protective Cap For 97B Series 97B-25043 For Receptacle SHELL SIZE 'D' + 0.60/-0 'A' MAX. 'E' MIN. 10 SL 14 S 16 S 23.0 30.0 16.0 20.70 4.30 5.50 32.50 37.0 40.50 43.50 47.0 54.0 60.50 67.0 73.0 90.0 100.0 115.0 160.0 'B' + 0.20 All dimensions are in mm INK MARK A CONN. NO. & BATCH CODE AS PER BOM. 'D' 'B' + ONE LINK'E' 'A' 97B-25042 For Plugs All dimensions are in mm 'D' 'B' + ONE LINK'E' 'A' SHELL SIZE 'B' MAX. 'D' + 0.60/-0 'A' MAX. 'E' MIN. 10 SL 14 S 16 S 21.0 27.50 23.50 31.50 4.30 5.50 30.0 33.50 37.0 40.0 43.0 49.50 56.0 62.50 73.0 90.0 100.0 115.0 130.0 190.0 INK MARK A CONN. NO. & BATCH CODE AS PER BOM. 4.70 Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut P rotective cap for 97B

L D C A B 16S 1.59 1.59 2.39 3.60 5.70 9.05 3.10 3.10 4.78 7.85 11.10 15.00 1.72 1.72 2.51 4.57 7.15 11.90 26.00 30.50 36.60 40.70 40.70 44.45 CONTACT SIZE 'A' 'B' 'C' 2.60 2.60 3.96 6.75 9.50 13.90 'D' 'L'CONTACT PART NO 97B - 106433 97B - 108295 97B - 109388 97B - 108386 97B - 108384 97B - 112067 Pin - Male Crimp Contact Contact Size 12, 16, 16S Contact Size 0 Contact Size 4 Contact Size 8 16S 3.10 3.10 4.78 7.85 11.10 15.00 1.72 1.72 2.51 4.57 7.15 11.90 26.30 34.20 37.00 37.00 40.00 44.45 CONTACT SIZE 'B' 'C' 2.60 2.60 3.96 6.75 9.50 13.90 'D' 'L'CONTACT PART NO 97B - 108456 97B - 108457 B - 110262 B - 108387 B - 111878 B - 112068 C rimp Contact Details Socket - Female Crimp Contact

Q S SQ R SQ L KM A 37.75 37.75 37.75 37.75 51.40 51.40 51.40 51.40 51.40 51.40 51.40 51.40 'R' +-0.10 18.20 20.60 23.00 24.60 24.60 27.00 29.40 31.80 34.90 39.70 44.50 49.20 SHELL SIZE 10SL 12S 14S 16S 18.21 21.40 24.61 27.41 27.41 30.81 34.19 37.39 40.89 46.71 53.39 59.59 2.79 3.20 3.20 3.20 3.20 3.99 3.99 3.99 3.99 3.99 3.99 3.99 14.20 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 25.40 28.00 30.00 32.50 32.50 35.00 38.00 41.00 44.50 50.80 57.00 63.50 'A' +0.0 -0.15 'K' +-0.20 'M' +0.41 -0.0 'S' +-0.20 'L' MAX. 18.19 21.30 24.59 30.78 34.16 37.36 40.87 46.68 53.36 59.56 22.20 3.99 3.73 oD +0.0 -0.13 'K' +-0.38 -0.0 'M' +0.18 Q +-0.10 -0.0 18.21 20.60 23.01 27.0 29.39 31.80 34.90 39.70 44.50 49.20 S +-0.13 25.40 28.05 30.0 35.05 38.0 40.99 44.45 50.80 57.10 63.50 R +0.18 0.20 33.32 36.20 39.67 46.02 50.80 53.98 60.32 66.68 76.20 84.12 T +0.23 -0.25 SHELL SIZE 10SL 12S 14S 16S 27.38 14.20 19.0 20.60 2.79 3.20 3.23 4.32 M4 32.51 24.61 42.87 18.19 21.30 24.59 30.78 34.16 37.36 40.87 46.68 53.36 59.56 22.20 3.99 3.73 oD +0.0 -0.13 'K' +-0.38 -0.0 'M' +0.18 Q +-0.10 -0.0 18.21 20.60 23.01 27.0 29.39 31.80 34.90 39.70 44.50 49.20 S +-0.13 25.40 28.05 30.0 35.05 38.0 40.99 44.45 50.80 57.10 63.50 R +0.18 0.20 33.32 36.20 39.67 46.02 50.80 53.98 60.32 66.68 76.20 84.12 T +0.23 -0.25 SHELL SIZE 10SL 12S 14S 16S 27.38 14.20 19.0 20.60 2.79 3.20 3.23 4.32 M4 32.51 24.61 42.87 FLANGE RELATIVE TO HOLES EQUAL WITHIN 0.38 (8 PLACES) ‘S’ SQ Q1 ‘A’ ‘T’ ‘K’ ‘M’ ‘A’ ‘R’ SQ. (4 HOLES) Q‘D’ Dummy Receptacle Rear Side Closed Thru Bulkhead Receptacle Dummy Receptacle Rear Side Open (Hollow) SECTION ‘A-A’ ‘A’Q1 ‘D’ FLANGE RELATIVE TO HOLES EQUAL WITHIN 0.38 (8 PLACES) ‘S’ SQ. ‘K’ ‘M’‘R’ SQ. ‘Q’ ‘T’ ‘A’ (4 HOLES) ORDERING INFO 97B-3105-XX-CF CF-CLOSED FLANGE HF-HOLLOW FLANGE ORDERING INFO TBH-97BS-XX-YY PS PIN & SOCKET CONTACT INSERT ARRANGEMENT THRU BULKHEAD SERIES SERIES DESIGNATION SHELL SIZEDESIGNATION FOR DUMMY RECEPTACLE SERIES DESIGNATION

MS/97B Connector- Accessories Crimp contact Contacts for MS/97B connectors are machined from copper alloys and silver plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 16 and 12 socket contacts are of the closed entry design. Gold plated contacts are also available. * Solder contacts are not sold as separate items. Part numbers shown here are for crimp contacts only. When using wire adapter sleeve shown. * Contact rating as stated are test ratings only. The connecter may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer\`s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. When proprietary crimp contacts are employed rather than the standard MS approved solder contacts, the following application tools are recommended for use. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. TOOLING CHART Crimping Tool M22520/1-01 M22520/1-01 Positioner/ Turret MS/97B Application tools Connectors * Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266 ** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co. † Tools used with Arbor Press 11-7364 Part Number For Crimp Contacts only* Pin/ Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Mating End Size

16 Short

16 Long

22 22 10 6 2 Test Current* Amps 7.5 7.5 150 125 †MS-106433 MS-108456 MS-108295 MS-108457 MS-108388 MS-110262 MS-108386 MS-108387 MS-108384 MS-111878 MS-112067 MS-112068 Insertion/Removal Tool 97B-IR-16 97B-IR-16 97B-IR-12 97B-IR-8 97B-IR-4 97B-IR-0

(No suffix - Normal) See insert orientations on page 6. MS 3 100 A -- - - - -18 19 P PCW 3 - Solder 4 - Crimp To obtain the specific connector required, write down the connector number from the typical example below. Only inserts shown in the availability chart shown on page 7 can be specified. Connectors are delivered with protective plastic dust covers. Include premating contact designation only if premating contact is required. The second letter in the premating contact designation stands for the actual contact position. B at the end of the connector number indicates telescopic bushing provided. MS - Threaded version 97B - Bayonet version Series designation Insert arrangement See pages 7 to 18 Shell size 10S, 10SL, 12S, 12, 14S, 14, 16S, 16, 18, 20, 22, 24, 28, 32, 36. Connector Modification Contact type P - Pin contacts S - Socket contacts Standard - Silver plating Note : Contact factory for gold plating part number. Shell style 100 - Wall mounting receptacle Cable connecting receptacle Back box mounting receptacle (Do not accept accessory) Box mounting receptacle (Do not accept accessory) 101 - 102E - 103 - Straight plug to accept the accessory (Replace X with suitable accessory) 106 - 108 - 105A 107 - Jam nut Receptacle (Do not accept accessory) 107X Jam nut Receptacle to accept accessory (Replace X with suitable accessory) Straight plug connector without accessory & serration 103X Back Box Mounting Receptacle - Ordering MS/97B series to accept the accessory (Replace X with suitable accessory) 105 - Dummy receptacle Right angle plug connector Connector class (Accessory/Backshell) A -Solid Backshell suitable for straight Plug AG - Solid Backshell with Enviromental sealing Grommet F - Strain relief Backshell with Enviromental sealing Grommet (E & F are same) R- Shorter length Backshell with Environmental sealing grommet PGXX - PG Threaded Backshell to accept the PG gland (Replace XX with suitable thread size) MXX - Metric Threaded Backshell to accept the Metric gland (Replace XX with suitable thread size) G- Backshell suitable for heat shrink tubing with Environmental sealing Grommet SQ- Backshell suitable for heat shrink tubing & shielding with Environmental sealing Grommet EGM- Backshell with Metal ferrule suitable for shielded cable to suit variable cable sizes PHM- Backshell with out Metal ferrule suitable for unshielded cable to suit variable cable sizes RT- Right angle Backshell suitable for 100,101,103X Style Note: Connector 3103 supplied in two types. Connector with rear end thread to accept backshell & without rear end thread. To order 3103 without rear end thread do not add any connector class such as ( A,E,F,R...) & hence it is similar to 3102 with Back Box mount For e.g 97B-3103-18-1P-622 Connector without thread Standard connector supplied with Cadmium plating with Olivedrab Chromate Green conductive Finish 622 - Cadmium Free Zinc Cobalt Green conductive Finish (RoHS Compliant) 624 - Cadmium Free Zinc Cobalt Black conductive Finish (RoHS Compliant) 726 - Electrophoratic Black Non conductive finish (RoHS Compliant) A23 - Electoless Nickel Finish (RoHS Compliant) 9 - No solder Filling to contact applicable only for MS connector (100/102/103) 563 - 0.5 micron gold plated contacts (standard silver plated contacts) 97BS - If added to receptacle part number connector supplied with SS wear pin 97BS - If added to Plug part number connector supplied with Roller Stud (Shell Size 18-40) B - Strain relief BIS supplied with M3420 bushing CXX - Crimp contact suitable XX AWG size F0/LC - Less contacts F42 - Less grommet & backshell HD - Heavy duty coupling ring RFI - Plug conn with grounding fingure SQG - Square flange gasket applicable to receptacle for (100/102/103) SR - MS3057 - XXA Cable Clamp SRC - MS3057 - XXC Cable Clamp T 00 - Metric THD holes in Flange Applicable for PTC9 - PC Tail Connector (Refer Page 25) PTC9- Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, Amphenol reserves the right to change specifications without notice. This publication ACRMS02 03/13 MS AND 97B Series Connectors supercedes all existing Amphenol literature on MS AND 97 B Series Connectors.

Amphenol Fiber Systems International

1300 Central Expressway North

Suite 100 Allen,Texas 75013, USA Tel: +1-214-547-2400 Fax: +1-214-547-9344 Amphenol PCD

72 Cherry Hill Drive

Beverly, MA 01915 USA Tel: +1-978-624-3400 Fax: +1-978-927-1513 info@amphenolpcd.com www.amphenolpcd.com www.backshellworld.com Sales & Product Support 40-60, Delaware Avenue Sidney, NY 13838-1395 Tel: +1-607-563-5011 Fax: +1-607-563-5357 Amphenol Aerospace Operations Amphenol Canada Meford Drive Scarborough, Tel: +416-291-4401 Fax: +416-292-0647 ON MIB 2X6 France Amphenol Socapex S.A.S. 948,Promenade de I'Arve Bp29, Thyez Cedex 74311, France Tel: +33-4-5089-2800 Fax: +33-4-5096-1941 Amphenol Air-LB Immeuble Le Doublon 11, Avenue Dobonnet Courbevoice-Cedex 92407, France Fax: +33-1-4905-3043 Germany Amphenol-Air LB GmbH Am Kleinbahnhof 4 Saarlouis D-66740, Germany Tel: 49-6831-9810-00 Fax: 49-6831-9810-30 Holland Amphenol Benelux Zadelmaker 121 NL-2401 PD Alphen aan den Rijn Holland Tel:+31-172-444903 Fax:+31-172 240254 United Kingdom Amphenol Limited Thanet Way, Whitstable Kent CT5 3JF, England Tel: +44-1227-773-200 Fax: 44-1227-276-571 Italy Via Barbaiana 5

20020 Lainate (Milano)

Tel :+39-02-93254.209 +39-02-93254.214 Fax:+39-02-93254-444 Center & East Europe Amphenol Wiener Gasse 68

2380 Perchtoldsdorf

Tel: +43-699-10396071 Fax: +43 699 40396071 EUROPE ASIA China Amphenol PCD Shenzhen 3/F Building, A4 Songbai Industrial Park East Road of Minghuan Gongming Town, Baon District Shenchen, China Tel: +86-755-8173-8000 Fax: +86-755-8173-8180 Japan Amphenol Japan 471-1, Deba, Ritto City Shiga 520-3041, Japan Tel: +81-77-553-8501 Fax: +81-77-551-2200 Korea Amphenol Daeshin Electronics

558 SoSa, SongNae, Bucheon-City

Kyunggi-Do, Korea 420-130 Tel: +82-32-610-3800 Fax: +92-32-673-2507 Singapore Amphenol East Asia Ltd.

72 Bendemeer Road

# 03-33 Luzerne Singapore 339 941 Tel: 65-6294-2128 Fax: 65-6294-3522 Amphenol Interconnect India Pvt. Ltd.

61 Electronics City

Bangalore-560 100, India Ph: +9180-2852-3838 Fax: +9180-2852-0418 Amphenol Interconnect India Pvt. Ltd.

105 Bhosari Industrial Area

Pune-411026, India Tel: +9120-3068-8305 Fax:+9120-2712-9158 India ROW Australia Amphenol Australia Pty Ltd

2 Fiveways Boulevard

Fax: +61-3-8796-8801 Africa Amphenol South Africa

30 Impala Road

2196 Sandton-Chistlehurston

Tel: +27-11-783-9517 Fax: +27-11-783-9519 Russia Amphenol Russia 8-2 Yaroslavskaja Str

129164 Moscow, Russia

Tel: +7-495-937-6341 Fax: +7-495-937-6319 Maslak

34396 Istanbul

Tel: +90-212-335-2501 Fax: +90-212-335-2500 Israel Bar-Tec Ltd. P.O. Box 279 Kfar Sava, 44102 Israel Tel: +972-9-7644100 Fax: +972-9-7674324 Brazil Amphenol do Brasil Ltda Rua Diogo Moreira 132 CEP 05423-010 Sao Paulo-SP, Brazil Tel: +55-11-3815-1003 Fax: +55-11-3815-1629 Argentina Amphenol Argentina Avenida Callao 930 2nd Floor, Office B Plaza C1023AAP Buenos Aires Argentina Tel: 54-11-4815-6886 Fax: 54-11-4814-5779 Austria Amphenol Austria Wiener Gasse 68 2380, Erchtoldsdarf, Austria Tel : + 43-69910396071 Fax: + 43-69940306071 Spain Amphenol Iberica Edificio Burgosol Oficina N 55 C/Comunidad de Madrid 35 bis - Tel: +34-91-6407302 +34-91-6407306 Fax:+34-91-6407307 Las Rozas (Madrid) Sweden Amphenol Industrial and Military & Aerospace Nordic & Baltic Military Phone/ Mobile+46702129200 Industrial +46 767909560

www.amphenol-in.com 105, Bhosari Industrial Area, Pune - 411 026. Tel.: 91-20-30688303, 30688304 Fax : 91-20-30688321 Email : vbhavsar@amphenol-in.com sales@amphenol-in.com Export 105, Bhosari Industrial Area, Pune - 411 026, India. Tel.: 91-20-30688305, 30688353 Fax : 91-20-27129158 Email : svpatil@amphenol-in.com 4931, 11th Floor, High Point IV 45, Palace Road, Bangalore 560 001. Tel.: 91-80-22281392, 22281002 Fax : 91-80-22253859 Email : kmanoj@amphenol-in.com MARKETING HEADQUARTERS Southern Region Northern and Eastern Region 1414, 14th Floor, Chiranjiv Tower, 43, Nehru Place, New Delhi - 110 019. Tel. : 91-11-26449177 Telefax : 91-11-26449176 Email : sunily@amphenol-in.com 107, 1st Floor, ‘Am Sri Classic’, Sarojinidevi Road, Secunderabad - 500 003. Telefax : 91-40-66332906 Email : pprasad@amphenol-in.com Central Region 105, Bhosari Industrial Area, Pune - 411 026. Tel.: 91-20-27119735, 30688334 Fax: 91-20-27120581, 27119735 Email : sunilp@amphenol-in.com Western Region Our offices in India: Pune Operations Bangalore Operations

Product Information

ACRMS02 specifications and overview.

Summary

MS & 97B - Series

Description

MS & 97B - Series

Source title ACRMS02 Datasheet(PDF) - Amphenol Corporation

Related Parts

More parts from the same family.

Browse manufacturer