ACPE ABRACON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

FUNDAMENTAL FREQUENCY, LOW JITTER 5.0V or 3.3Vdc FULL-SIZE DIP CRYSTAL CLOCK OSCILLATORS ACPE and ACPEL ACPEX- Frequency - Temperature - Overall Frequency Stability - Pin 1 option - Value Added XX.XXXX MHz -Y for ± 10ppm max. -J for ± 20ppm max. -R for ± 25ppm max. -K for ± 30ppm max. -H for ± 35ppm max. -C for ± 50ppm max. -G Gull Wing -QXX (Trimmed Leads) -D for -10°C to + 60°C -E for -20°C to + 70°C -F for -30°C to + 70°C -N for -30°C to + 85°C -L for -40°C to + 85°C -Blank = N/C -QBAR = Complementary output -A = Enable/Disable ORDERING OPTIONS PIN FUNCTIONNUMBER

1 NC or Q or E/D

8 Output

14 Vcc

APPLICATIONS:

  • Gigabit ethernet. • xDSL, Stratum IV.
  • D ata telecommunications and networking. • SONET/SDH. FEATURES:
  • Low jitter PECL logic. • Complementary output.
  • T ight overall frequency stability.• Wide frequency range.
  • Fast rise and fall times. Dimensions: Inches (mm) Frequency Range 3.5 MHz - 25 MHz Operation Mode Fundamental, AT Operating Temperature -10°C to + 60° C (See Options) Storage Temperature -55°C to + 125° C Frequency Tolerance @ 25°C ±50 ppm max. (See Options) Frequency Stability over Temp.± 50 ppm max. (See Options) Equivalent Series Resistance 200 W for 3.5 MHz < F < 4.0 MHz (ESR) Maximum 150 W for 4.0 MHz < F < 6.0 MHz 100 W for 6.0 MHz < F < 10.0 MHz 80 W for 10 MHz < F < 14.0 MHz

50 W for 14 MHz < F <_ 25 MHz

Shunt Capacitance C0 7 pF max. Load Capacitance CL 16pF (See Option) Drive Level 100µW max. Aging @ 25° C First Year ± 5 ppm max. Insulation Resistance 500 MW min. at 100 Vdc ± 15V PARAMETERS ACPE ACPEL S S T T A A N N D D A A R R D D S S P P E E C C I I F F I I C C A A T T I I O O N N S SFrequency Range (Fo) 10.00MHz- 200MHz Operating Temperature (TOPR) 0°C to +70°C (see options) Storage Temperature (TSTO) -55°C to +105°C Frequency Stability (DF/ Fo) ±100ppm max. (See Options) Supply Voltage (Vcc)+ 5Vdc ±5% +3.3Vdc ±5% Supply Current (Idd) 100mA max. Duty cycle or Symmetry 40/60% max. measured 50% waveform Rise and Fall times (Tr/Tf) 2ns max. measured at 20% to 80% level Output PECL square wave 10KH compatible Output and E/D options (pin 1) No connection or Complementary output or E/D Output load 50W terminated into 3VDC or Thevenin equivalent Output voltage VOH = Vcc -1.025V min., Vcc - 0.74V max. VOL = Vcc -1.95V min., Vcc - 1.60V max. Period Jitter 3.5ps RMS max. Enable/Disable option (pin 1) VIL= Vcc -1.62V max., VIH = Vcc -1.025V min. (Output is in “0” state when disabled) Start-up time 10ms max. * Output must be terminated into 50W to +3VDC or Thevenin equivalent. Environmental and mechanical specifications, see appendix C. Group 1. Value added, see appendix D. Teat circuit and waveforms, see appendix B Marking, see appendix G. Recommended handling, see appendix F. Application notes, see appendix A. 20 x 12.6 x 7.2 mm Vdd R1 R2 5.0V 82W 130W 3.3V 130W 82W Blank or L Thevenin equivalent ABRACON IS ISO 9001 / QS 9000 CERTIFIED NOTE: Left blank if standard • All specifications and markings subject to change without notice

29 Journey • Aliso Viejo, CA 92656 • USA

(949) 448-7070 • FAX : (949) 448-8484 E-MAIL: abinfo @ abracon.com • INTERNET ADDRESS : www.abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON CORPORA TION58