DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Features
Miniature Size – 2.0 x 2.5 mm Max size – 0.95 mm Max Height – Standard 2 x 2.5 mm PCB footprint High Power Rating – 30 dBm Abs Max Tx Power in Tx Band Environmental – RoHS 6 Compliant – Halogen free – TBBPA Free Specifi cations Rx Band Performance, -20 to +90° C – Insertion Loss: 2.2 dB Max – Rx Noise Blocking: 50 dB Min Tx Band Performance, -20 to +90° C – Insertion Loss: 2.5 dB Max – Tx Interferer Blocking: 55 dB Min
Applications
Digital Enhanced Cordless Telecommunications (DECT) systems operating in the UMTS Band 1 frequency range. Ant Port 3 Rx Port 2 Tx Port 1
Min Max Min Typ [3] Max Min Max Antenna Port to Receive Port S23 Insertion Loss in Receive Band (2110 – 2170 MHz) dB 2.2 1.4 2.2 2.2 S22 Return Loss (SWR) of Receive Port in Receive Band (2110 – 2170 MHz) dB 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) S23 Attenuation, 10 – 1920 MHz dB 30 30 38 30 S23 Attenuation in Transmit Band (1920 – 1980 MHz) dB 48 48 67 48 S23 Attenuation, 1980 – 2025 MHz dB 35 35 50 35 S23 Attenuation, 2255 – 2400 MHz dB 30 30 50 30 S23 Attenuation in Bluetooth Band (2400 – 2483.5 MHz) dB 35 35 55 35 S23 Attenuation, 4030 – 4150 MHz dB 15 15 31 15 S23 Attenuation, 5950 – 6130 MHz dB 15 15 20 15 Transmit Port to Antenna Port S31 Insertion Loss in UMTS Tx Channel Center [4]
1922.4 MHz
1924.4 MHz
1926.4 – 1971.6 MHz
1973.6 MHz
1975.6 MHz
1977.6 MHz
2.5 2.3 2.1 2.0 2.0 2.0 1.9 1.5 1.3 1.3 1.3 1.3 2.3 2.1 2.0 2.0 2.0 2.0 2.3 2.1 2.0 2.1 2.3 2.5 S11 Return Loss (SWR) of Transmit Port in Transmit Band (1920 – 1980 MHz) dB 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) S31 Attenuation, 10 – 1574 MHz dB 30 30 45 30 S31 Attenuation in GPS Rx Band (1574.42 – 1576.42 MHz) dB 35 35 38 35 S31 Attenuation, 1800 – 1900 MHz dB 27 27 41 27 S31 Attenuation, 2010 – 2025 MHz dB 28 28 52 28 S31 Attenuation in Receive Band (2110 – 2170 MHz) dB 45 45 51 45 S31 Attenuation in Bluetooth Band (2400 – 2483.5 MHz) dB 30 30 38 30 S31 Attenuation in Transmit 2 nd Harmonic Band (3840 – 3960 MHz) dB 30 30 39 30 S31 Attenuation in Transmit 3 rd Harmonic Band (5760 – 5940 MHz) dB 5 5 16 5 Antenna Port S33 Return Loss (SWR) of Ant Port in Rx Band (2110 – 2170 MHz) dB 9 (2.1) 9 21 (1.2) (2.1) 9 (2.1) S33 Return Loss (SWR) of Ant Port in Tx Band (1920 – 1980 MHz) dB 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band (2110 – 2170 MHz) dB 50 50 61 50 S21 Tx-Rx Isolation in Transmit Band (1920 – 1980 MHz) dB 55 55 64 55 Notes: 1. T C is the case temperature and is defi ned as the temperature of the underside of the Duplexer where it makes contact with the circuit board. 2. Min/Max specifi cations are guaranteed at the indicated temperature with the input power to the Tx port equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indicated band at the specifi ed temperature. Typical values may vary over time. 4. Integrated Insertion Loss over 3.8 MHz UMTS channel(s).
Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C -65 to +125 Maximum RF Input Power to Tx Port 1920–1980 MHz All other frequencies dBm +30 +25 Maximum Recommended Operating Conditions [2] Parameter Unit Value Operating temperature, Tc [3] °C –40 to +100 Maximum CW RF Input Power to Tx Port 1920–1980 MHz All other frequencies dBm +28 +23 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The device will function over the recommended range without degradation in reliability or permanent change in performance, b ut is not guaranteed to meet electrical specifi cations. 3. T C is defi ned as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.
- Dimensions in millimeters
- Dimensions nominal unless otherwise noted
- Contact areas are gold plated
Figure 23. Package Outline Drawing
1 Rx (or Rx(+))
6 Ant
8 Optional: Gnd, NC or Rx(–)
Figure 24. Pad Detail
0.15 X 45°
Figure 25. Suggested PCB Layout Note: Pin 8 grounded in this example. need to be adjusted to retain a Zo of 50 ohms.
Figure 32. Product Marking and Pin Orientation Figure 30. Recommended Solder Mask Figure 31. Solder Mask Superposed on ACMD-7617
- Mask apertures match device pads 1:1
Figure 35. SMT Reel Drawing
- Reel shall be labeled with the following
- A certificate of compliance (c of c) shall
- Reel must not be made with or contain
- All dimensions in millimeters (mm)
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-2912EN - May 26, 2011 Package Moisture Sensitivity Feature Test Method Performance Moisture Sensitivity Level (MSL) at 260° C JESD22-A113D Level 3 0 50 100 150 200 250 300 Time, seconds 100 150 200 250 300Temperature, °C PROFILE.GRF PROFILE. WMF
6 February 2003
R. Waugh Tested profile shown. Figure 36. Verifi ed SMT Solder Profi le
Ordering Information
Part Number No. of Devices Container ACMD-7617-BLK 100 Tape Strip or Anti-static Bag ACMD-7617-TR1 3000 178 mm (7-inch) Reel ACMD-7617