ACMD-7401 HP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Features
- Miniature size: less than 1.4 mm high, 5 x 5 mm footprint
- Rx Band: 1930 – 1990 MHz typical performance: Rx Noise Blocking: 44 dB Insertion Loss: 2.2 dB typical, 3.0 dB band edge
- T x Band: 1850 – 1910 MHz typical performance: T x Interferer Blocking: 54 dB Insertion Loss: 1.8 dB typical, 2.5 dB band edge
- 30 dBm Tx Power Handling
Applications
- Handsets or data terminals operating in the US PCS frequency band more than 40 dB rejection of the transmit-generated noise in the receive band. Typical insertion loss in the Tx channel is only 1.8 dB, minimizing current drain from the power amplifier. Typical insertion loss in the Rx channel is 2.2 dB, improving receiver sensitivity. Agilent’s thin-film Bulk Acoustic Resonator (FBAR) technology makes possible high-Q filters at a fraction their usual size. The excellent power handling of the bulk-mode resonators supports the high output powers needed in PCS handsets, with virtually no added distortion.
- T C is defined as case temperature, the temperature of the underside of the
- Specifications are given at operating temperature limits and room
- Specifications are guaranteed over the given temperature range, with the
upper transmit band edge will degrade slightly.
- High temperature specifications are guaranteed with thermal pads in
thermal contact to the motherboard. Figure 1. Underside of the duplexer.
duplexer, as shown in Figure 15. Figure 14. Thermal and Electrical Ground Plane. Figure 16. Detail of Input/output Pads. Figure 15. Thermal and Electrical Ground Plane Details.
0.0 Ref
techniques will have to be used. ground plane above and below. Figure 17. Motherboard Isolation Test Method. upper (and other) ground planes. alignment during reflow soldering.
Figure 18. Solder Mask/Solder Stencil. symmetrical about the two center lines.
Figure 21. Reel Dimensions (all dimensions in mm). Figure 22. T ape Dimensions (all dimensions in mm). Allowable camber to be 1 mm per 100 mm in length.
0.201.40 REF
Figure 23. Unit Orientation in Tape.
Ordering Information
Part Number No. of Devices Container ACMD-7401-BLK 100 Anti-static bag ACMD-7401-TR1 1000 7 ” Reel www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (65) 6756 2394 India, Australia, New Zealand: (65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (65) 6755 2044 Taiwan: (65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. May 25, 2004 5989-0533EN