DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
ˎ July 2016 For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) EMC Components ACM2012D [0805 inch]* * Dimensions Code JIS[EIA] Common Mode Filters ACM2012D Type ACM-D Series
(2/7) 20160708 / cmf_commercial_signal_acm2012d_en.fm EMC Components ˎ REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. REMINDERS
(3/7) 20160708 / cmf_commercial_signal_acm2012d_en.fm EMC Components Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. ˎ Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.)
FEATURES
Broadband common mode filter that was developed for Gbps-level high-speed differential signal interfaces such as DVI and HDMITM. Differential mode cutoff frequency is 3.5GHz, so they do not negatively influence high-speed differential signals. Characteristics impedance is matched for 100, which is set for many differential interfaces, and can suppress unnecessary reflection components. APPLICATION EMI measure for HDMITM, which is an interface for digital video devices: ACM2012H is ideal for senders (Sources) such as Digital TVs, DVD recorders, and liquid crystal projectors, while ACM2012D is ideal for receivers (Sink). EMI measure for high-speed differential signal interfaces for digital video signal interfaces such as DVI, Display port, and Serial ATA used for PCs, etc. PART NUMBER CONSTRUCTION OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT The Storage temperature range is for after the circuit board is mounted. Overview of ACM2012D Type ACM 2012 D - 900 - 2P - T 00 Series name L×W×H Dimensions Product internal code Impedance Number of lines Packaging style Internal code(mm) ()at 100MHz 2012 2.0×1.2×1.3 D 900 90 2P 2 lines T ø180mm reel 00 Type Temperature range Reel diameter Package quantity Individual weight Operating temperature ʢ°Cʣ Storage temperature ʢ°Cʣ ʢmmʣ (pieces/reel) ʢmgʣ ACM2012D –40 to +85 –40 to +85 ø180 2,000 10 Product compatible with RoHS directive Compatible with lead-free solders RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/7) 20160708 / cmf_commercial_signal_acm2012d_en.fm EMC Components Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. ˎ ACM2012D Type RECOMMENDED REFLOW PROFILE Preheating Soldering Peak Temp. Time Temp. Time Temp. Time T1 T2 t1 T3 t2 T4 t3 150°C 180°C 60 to 120s 230°C 10 to 30s 245°C 5s max. Natural cooling Preheating Soldering T3 T3 t: Time Peak T: Temperature
(5/7) 20160708 / cmf_commercial_signal_acm2012d_en.fm EMC Components Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. ˎ ACM2012D Type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM 2.0±0.2 1.2±0.2 1.3max.0.5 0.3 0.05 0.3 1.2 0.40.4 Dimensions in mm Dimensions in mm1.1 0.750.75 0.4 0.40.4 No polarity
(6/7) 20160708 / cmf_commercial_signal_acm2012d_en.fm EMC Components Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. ˎ ACM2012D Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE ˓Measurement equipment ˎ Equivalent measurement equipment may be used. IMPEDANCE VS. FREQUENCY CHARACTERISTICS ˓Measurement equipment ˎ Equivalent measurement equipment may be used. Common mode impedance [at 100MHz] DC resistance [1 line] Rated current Rated voltage Insulation resistance Cutoff frequency Characteristic impedance Part No. 65 90 0.30 300 20 10 3.5 100 ACM2012D-900-2P-T00 Measurement item Product No. Manufacturer Common mode impedance 4991A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies Product No. Manufacturer 4991A Keysight Technologies 1 10 100 100001000 10000 1000 100 Frequency (MHz) Impedance (Ω)
900 Common mode 900 Differential mode
(7/7) 20160708 / cmf_commercial_signal_acm2012d_en.fm EMC Components Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. ˎ ACM2012D Type PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS Type A W1 W2 N E ACM2012D ø180±3 9+1/–0 13±1 60+1/–0 2 typ. Dimensions in mm Type A B øD0 E F P0 P1 P2 W K t ø13.0±0.2 ø21.0±0.8 N E2.0±0.5 A Dimensions in mm 1.0 K W F E P2øD0 B A 160min. Taping 440min. Drawing direction 500 to 560min. Dimensions in mm