ACF-10 MINMAX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2018/10/05 REV:4 Page 1 of 3

FEATURES

►Ultra Compact Size 1.5 x 1.0 x 0.6" ►Fully Encapsulated Module for PCB Mounting ►Universal Input 85-264VAC, 47-440Hz ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 4000VAC with Reinforced Insulation ►No Min. Load Requirement ►Operating Ambient Temp. Range -25℃ to +70℃ ►Overload/Voltage and Short Circuit Protection ►EMI Emission EN 55032/14-1 Class B & FCC Level B Approved ►EMC Immunity EN 61000-4-2,3,4,5,6,8,11 Approved ►Eco Design, Low No Load Power Consumption< 150mW ►Safety Approval to UL/cUL/IEC/EN 62368-1 (60950-1), TUV IEC/EN 60335-1 & CE Marking PRODUCT OVERVIEW The new ACF-10 Series from MINMAX is a new range of ultra-small, fully encapsulated 10 Watt AC/DC power supply modules. They are designed for easy PCB mounting featuring measuring only 1.5"x1"x0.6". The ACF-10 series consist 7 models featuring universal AC input (85-264VAC) and tight regulated single output voltage ranging from 3.3-48VDC; 4000VAC isolation with reinforced insulation; EMI emission EN 55032/14-1 class B approved; EMC immunity EN 61000-4-2,3,4,5,6,8,11 approved; no minimum load requirement; short circuit / overload / overvoltage protection and low stand-by power consumption <150mW as well. Units have been qualified via CB report and class II protection level for both UL/cUL/IEC/EN 62368-1(60950-1) and TUV/IEC/EN 60335-1 (Household Safety)certifications. The ACF-10 power supplies provide a good solution for space critical applications in consumer appliances, industrial electronics, instrumentation, household and communication equipment where PCB space is critical and limited. Model Selection Guide Model Number Output Voltage Output Current Input Current Max. capacitive Load Efficiency (typ.) 115VAC, 60Hz 230VAC, 50Hz Max. Peak(1) @Max. Load @Max. Load, 115VAC VDC mA mA mA(typ.) μF % ACF-10S03 3.3 2600 3380 186 121 4400 77 ACF-10S05 5 2000 2600 209 136 2200 80 ACF-10S09 9 1100 1440 199 130 680 83 ACF-10S12 12 830 1080 198 129 390 84 ACF-10S15 15 660 860 197 128 240 84 ACF-10S24 24 410 530 191 124 100 86 ACF-10S48 48 210 270 201 130 24 84 Input Specifications Parameter Conditions / Model Min. Typ. Max. Unit Input Voltage Range All Models 85 --- 264 VAC Input Frequency Range 47 --- 440 Hz Input Voltage Range 120 --- 370 VDC No-Load Power Consumption --- --- 0.15 W Inrush Current (Cold Start at 25℃) 115VAC --- --- 20 A

E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2018/10/05 REV:4 Page 2 of 3 Output Specifications Parameter Conditions / Model Min. Typ. Max. Unit Output Voltage Setting Accuracy --- ±1.0 ±2.0 % Line Regulation Vin=Min. to Max. @Full Load --- --- ±0.5 % Load Regulation Io=0% to 100% --- --- ±1.0 % Minimum Load No minimum Load Requirement Ripple & Noise 0-20 MHz Bandwidth 3.3V & 5VDC Output Models --- --- 60 mV P-P Other Output Models --- --- 1 %VPP of Vo Over Voltage Protection Zener diode clamp --- 125 --- % of Vo Temperature Coefficient --- ±0.01 ±0.02 %/℃ Over Load Protection Foldback, auto-recovery --- 150 --- %Inom. (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, Automatic Recovery General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage 60 Seconds 4000 --- --- VAC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ Switching Frequency --- 45 --- kHz Hold-up Time 115VAC, 60Hz --- 8 --- ms 230VAC, 50Hz --- 40 --- ms MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 452,916 --- --- Hours Protection Class II According IEC/EN 60536 Safety Approvals UL/cUL 60950-1 recognition(UL certificate), IEC/EN 60950-1(CB-report) UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1(CB-report) IEC/EN 60335-1 recognition(TUV certificata,CB-report) EMC Specifications Parameter Standards & Level Performance EMI Conduction and Radiation EN 55014-1, EN 55032, FCC part 15 Class B EMS EN 55014-2, EN 55024 ESD EN 61000-4-2 Air ± 8kV , Contact ± 6kV A Radiated immunity EN 61000-4-3 10V/m A Fast transient EN 61000-4-4 ±2kV A Surge EN 61000-4-5 ±1kV A Conducted immunity EN 61000-4-6 10Vrms A PFMF EN 61000-4-8 30A/m A Dips EN 61000-4-11 30% 10ms A Interruptions EN 61000-4-11 >95% 5000ms B Environmental Specifications Parameter Conditions Min. Max. Unit Operating Ambient Temperature Range Natural Convection -25 +70 ℃ Power Derating +50℃ to +70℃ 0.25 W / ℃ Storage Temperature Range -40 +85 ℃ Humidity (non condensing) --- 95 % rel. H Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ Notes 1 Peak load lasting <30s with a maximum duty cycle of 10%, average output power not to exceed maximum power. 2 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 Specifications are subject to change without notice.

Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886 -6-2923149 E -mail: sales@minmax.com.tw 2018/10/05 REV:4 Page 3 of 3 Package Specifications Mechanical Dimensions Pin Connections Pin Function

1 AC(N)

2 AC(L)

►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) ►Pin pitch tolerance: ±0.25 (0.01) ►Pin diameter  1.0 ±0.1 (0.04±0.004) Physical Characteristics Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Tinned Copper Weight : 29g 25.4 [1.00] 19.05 [0.75] 12.70 [0.50] 2.54 33.02 [1.30] 38.5 [1.52] [0.10] Bottom View 2.54 [0.10] 2.74 [0.11] 5.08 [0.20] 1.00 [ 0.04] 15.74 [0.62]