ACDA56-51SYKWA KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
0.56 inch digit height. Low current operation. Excellent character appearance. Mechanically rugged. Gray face, white segment. Package: 200pcs/ reel. Moisture sensitivity level : level 2a. RoHS compliant. Package Dimensions& Internal Circuit Diagram YELLOW
SPEC NO: DSAM4694 REV NO: V.7 DATE: JAN/12/2015 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1352000605 Selection Guide Note: 1. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. Typ. ACDA56-51SYKWA Super Bright Yellow (AlGaInP) White Diffused 52000 117000 Common Anode
Description
Symbol Parameter Device Code. Typ. Max. Units Test Condi- tions λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA λD [1] Dominant Wavelength Super Bright Yellow 3 588 nm 4 590 5 592 Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V IF=20mA Min. 586 588 590 Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 3000 V
SPEC NO: DSAM4694 REV NO: V.7 DATE: JAN/12/2015 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1352000605 Super Bright Yellow ACDA56-51SYKWA
SPEC NO: DSAM4694 REV NO: V.7 DATE: JAN/12/2015 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1352000605 ACDA56-51SYKWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Tape Specifications (Units : mm) Reel Dimension
SPEC NO: DSAM4694 REV NO: V.7 DATE: JAN/12/2015 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1352000605 PACKING & LABEL SPECIFICATIONS ACDA56-51SYKWA Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes